Chameth.com - posts like android-espresso-spoon, blogging-and-the-imaginary-quality-bar, why-you-should-be-using-https

Blogging and the Imaginary Quality Bar

2025-09-18T00:00:00Z

Recently I realised that I’ve developed a self-imposed quality bar for blog posts. They need to be a certain length, and have a certain substance to them. They need to be generally useful in some way I can’t quite define, to some imagined future audience. They need to have images to break up the page, and opengraph data for when they’re linked to on social media. But… maybe they don’t? Those things all make sense for longer “article” type posts, but not so much for a personal blog.

I’ve done some fiddling so that I can make posts without all that extra stuff. We’ll see how it goes. The posts won’t be distinguished on the site (yet?), but I have set up separate RSS feeds for just short form posts and long form posts in case subscribers are radically opposed to one or the other. Now I can start blogging like it’s 2005 again. But hopefully with a bit less cringe.

I’ve been staring at this post in my editor for about five minutes. The urge to make it longer, more thorough, more article-like is really strong. This entire paragraph is only here as a compromise with myself so I can actually save and commit the post.

The Curse of Knowledge and Blogging

2025-05-16T00:00:00Z

Finding a picture to go with a blog post about blog post ideas is hard, OK?

The single worst part about blogging for me is trying to come up with ideas for what to write about. Not because they’re hard to come up with, but because every idea seems too basic or not worth talking about. Seems.

It’s not just me, either. My friends will occasionally describe some interesting problem they’ve dealt with, and I’ll chime in with “you should blog about that”. Almost invariably the response is something like “it’s not that interesting”.

There’s a cognitive bias called the curse of knowledge¹. Basically, once you know something you can’t accurately reconstruct your previous state of mind from when you didn’t know it. You can struggle to do something for hours, piecing together scraps of information, using all kinds of specialist knowledge, and as soon as you’re finished it all seems so basic why would anyone want to read about that?

Other mental obstacles

Of course, nothing involving people is as simple as having one cause and an obvious solution. Even when I get over the “it’s too basic” road bump, there are other issues. Looking back over some of my posts, I get a horrible cringe-y feeling and the question of “why would anyone be interested in reading that?!” arrives unbidden. Even though I know that I’m interested in reading similar posts written by other people. I’m hesitant to attach labels to everything, but imposter syndrome says hi.

I think there’s also a cultural issue at play. British people tend to be somewhat reserved and downplay their accomplishments, especially when compared to people from the US². When I worked for a certain multinational ~~ad conglomerate~~ search engine company we actually had training on how to do performance reviews and speak about ourselves more like our US counterparts.

Put all these things into a cauldron, add a lizard’s leg and howlet’s wing, mix it all up, and you get a brain that despises the idea of blogging about anything. Great.

Dealing

So, now the problem is well-defined, what do we do about it? Clearly I am the best person to be offering this advice, given it’s been four months since my last blog post.

The best counter to the Curse of Knowledge that I’ve found is keeping notes, like a lab notebook. If you finish something and have dozens of links to different resources that you had to piece together, it’s probably something interesting and worth talking about even if it doesn’t seem like it any more. Or maybe you didn’t need a lot of references, but you had to write a lot down to make sense of something, or needed to draw diagrams to solve a problem. Again, probably interesting.

The other issues I’ve mentioned are not so easy to overcome. I’m also not going to try and perform therapy in the form of a blog post! What I personally do is keep a list of topics to write about (that have already passed the “probably interesting even if my brain doesn’t agree” check), and occasionally when the stars align I’ll feel like plucking one off the list and turning thoughts into words.

A call to action

If you’ve got a blog and haven’t written anything recently because you “don’t do anything interesting”, go write something! I promise that someone will be interested. Hell, feel free to send me a link and I’ll be interested for you.

If you don’t have a blog then why not start one? There are lots of great articles out there about why-you-should and how-you-can. And as a bonus, blog posts about how you set up your blog are super interesting. That’s one post sorted already!

As the open internet is slowly subsumed by massive corporate interests, and gummed up with spam and AI slop, the voice of real humans is becoming more and more important. Maybe we can — one blog at a time — get back to the ’90s internet that was full of individuality instead of today’s which is full of ads and spam?

Photo by Mika Baumeister on Unsplash

There’s also something called “Familiarity Blindness” that people like to talk about. It’s a much better name. The only problem is that I can’t find any actual published works that talk about it. No-one authoritative defines or mentions it. It just popped into existence a few years ago. Maybe it’s an LLM hallucination? ↩︎
My favourite commentary on this is Stephen Fry talking about American vs British comedy. ↩︎

Android testing with Espresso and Spoon

2017-05-16T00:00:00Z

I’ve been spending some time recently setting up automated testing for our collection of Android apps and libraries at work. We have a mixture of unit tests, integration tests, and UI tests for most projects, and getting them all to run reliably and automatically has posed some interesting challenges.

Running tests on multiple devices using Spoon

Spoon is a tool developed by Square that handles distributing instrumentation tests to multiple connected devices, aggregating the results, and making reports.

As part of our continuous integration we build both application and test APKs, and these are pushed to the build server as build artefacts. A separate build job then pulls these artefacts down to a Mac Mini we have in the office, and executes Spoon with a few arguments:

java -jar spoon-runner.jar \
    --apk application.apk \
    --test-apk applicationTests.apk \
    --fail-on-failure \
    --fail-if-no-device-connected

Spoon finds all devices, deploys both APKs on them, and then begins the instrumentation tests. We use two physical devices and an emulator to cover the form factors and API versions that are important to us; if any test fails on any of those devices, Spoon will return an error code and the build will fail.

For library projects, you only have a single APK containing both the tests and the library itself. The current version of Spoon requires both --apk and --test-apk to be specified, so we simply pass in the same APK to both. It looks like future versions of Spoon will be more flexible in this regard.

Spoon produces HTML reports, showing the status of each test run on each device. We have the report output folder collected as a build artefact, so the reports can be seen right from the build server:

Spoon output summary, showing results of 171 tests run on 3 devices

Flake-free UI testing with Espresso

Espresso is an Android library that provides an API for interacting with and making assertions about the UI of Android applications. Espresso has a very simple interface, and does lots of clever things under the hood to ensure that your tests only execute code when the UI is idle (and hence stable). You shouldn’t ever need to make your code sleep or wait.

In order for Espresso’s magic to work, it needs to know whenever some background activity is going on that it needs to wait for. By default, it hooks in to Android’s AsyncTask executor so it can wait for those to finish. In our apps, there were a few cases where we used an explicit Thread to do some background work, which caused tests to fail intermittently (depending on whether the thread performed its UI update before or after Espresso executed the test code). Rewriting these cases to use an AsyncTask enabled Espresso to figure out what was happening and the tests started passing reliably.

Another, similar, problem occurred where we were using RxJava to load some data. There are two possible ways to deal with this… Espresso has a concept of an idling resource, which provides a way of telling Espresso when a resource is busy so it can belay interacting with or testing the UI until the resource is finished. In our case, the code in question was going to be rewritten soon, so we went for a quicker and dirtier option: force RxJava to use the same executor as AsyncTask.

To do this, we added a simple test utility class that registers an RxJavaPlugin that overrides the Schedulers used by Rx:

/**
 * Hooks in to the RxJava plugins API to force Rx work to be scheduled on the
 * AsyncTask's thread pool executor. This is a quick and dirty hack to make
 * Espresso aware of when Rx is doing work (and wait for it).
 */
public final class RxSchedulerHook {

    private static final RxJavaSchedulersHook javaHook =
            new RxJavaTestSchedulerHook();

    private RxSchedulerHook() {
        // Should not be insantiated
    }

    public static void registerHooksForTesting() {
        if (RxJavaPlugins.getInstance().getSchedulersHook() != javaHook) {
            RxJavaPlugins.getInstance().reset();
            RxJavaPlugins.getInstance().registerSchedulersHook(javaHook);
        }
    }

    private static class RxJavaTestSchedulerHook extends RxJavaSchedulersHook {
        @Override
        public Scheduler getComputationScheduler() {
            return Schedulers.from(AsyncTask.THREAD_POOL_EXECUTOR);
        }

        @Override
        public Scheduler getIOScheduler() {
            return Schedulers.from(AsyncTask.THREAD_POOL_EXECUTOR);
        }

        @Override
        public Scheduler getNewThreadScheduler() {
            return Schedulers.from(AsyncTask.THREAD_POOL_EXECUTOR);
        }
    }
}

With the hook registered Rx does all of its work on the same thread pool as AsyncTask, which Espresso already knows about. It’s not the best long-term solution, but it means we don’t have to spend time integrating IdlingResource for code that doesn’t have long to live. With the hook in place, the tests that were flaking because of Rx started passing reliably as well.

Getting automatic screenshots of failures

Spoon provides a client library to, among other things, take a screenshot of the device. Espresso provides a hook that can be used to change how errors are handled. Putting the two together is very simple:

final FailureHandler defaultHandler =
        new DefaultFailureHandler(
                InstrumentationRegistry.getTargetContext());

Espresso.setFailureHandler(new FailureHandler() {
    @Override
    public void handle(Throwable throwable, Matcher<View> matcher) {
        try {
            Spoon.screenshot(
                    getActivity(),
                    "espresso-failure",
                    description.getClassName(),
                    description.getMethodName());
        } catch (Exception ex) {
            Log.e(TAG, "Error capturing screenshot", ex);
        }
        defaultHandler.handle(throwable, matcher);
    }
});

In our new error handler we simply ask Spoon to take a screenshot, then call Espresso’s original handler so that it can output its debugging information and fail the test. The Spoon runner automatically picks up the screenshot and adds it to the report:

Spoon output details, showing a screenshot captured of the failure

Having the screenshot, error message and logs all presented in a clean UI makes debugging failures much, much easier than searching through a huge build log to try and find the exception.

Filtering tests based on device capabilities

Some tests won’t work on every device you throw at them. We had two problems: some tests require a higher API version than some of our devices, and some of the UIs under test were designed to run only on certain resolutions.

The main cause for our dependence on newer API versions was the use of WireMock, a brilliant library for stubbing out web services. WireMock requires API 19, while our physical devices tend to run versions older than that. Stopping these tests running is simply a case of applying an annotation to the class:

@SdkSuppress(minSdkVersion=19)

Screen resolution is a bit more complicated. One of our apps is designed for a specific tablet device (and will never be used on anything else), and trying to render the UI on smaller screens results in items overlapping, important parts ending up below the fold, and other problems.

We’d still like all the other tests for that app to run on all of the devices, though, so we can test them on a variety of API versions and in other conditions. We just need to suppress the UI tests. To do this, we subclassed the Android ActivityTestRule and overrode the apply method:

@Override
public Statement apply(Statement base, final Description description) {
    if (!canRunUiTests(InstrumentationRegistry.getContext())) {
        // If we can't run UI tests, then return a statement that does nothing
        // at all.  With normal JUnit tests we'd just throw an assumption
        // failure and the test would be ignored, but that makes the Android
        // runner angry.
        return new Statement() {
            @Override
            public void evaluate() throws Throwable {
                // Do nothing
            }
        };
    }

    return super.apply(base, description);
}

/**
 * Checks that the screen size is close enough to that of our tablet device.
 */
@TargetApi(Build.VERSION_CODES.HONEYCOMB_MR2)
private boolean canRunUiTests(Context context) {
    if (Build.VERSION.SDK_INT < Build.VERSION_CODES.HONEYCOMB_MR2) {
        return false;
    }
    int screenWidth = dpToPx(context,
            context.getResources().getConfiguration().screenWidthDp);
    return screenWidth >= 600;
}

private int dpToPx(Context context, int dp) {
    DisplayMetrics displayMetrics = context.getResources().getDisplayMetrics();
    return Math.round(dp * displayMetrics.density);
}

When the rule is run, we check if the screen width meets a minimum number of pixels. If it doesn’t, an empty Statement is returned that turns the test into a no-op. These show up as passed rather than skipped in the output, but there doesn’t seem to be a nice way to signal to the Android JUnit runner that the test is being ignored programatically.

Why you should be using HTTPS

2016-06-17T00:00:00Z

The EFF’s HTTPS Everywhere logo

One of my favourite hobbyhorses recently has been the use of HTTPS, or lack thereof. HTTPS is the thing that makes the little padlock appear in your browser, and has existed for over 20 years. In the past, that little padlock was the exclusive preserve of banks and other ‘high security’ establishments; over time its use has gradually expanded to most (but not all) websites that handle user information, and the time is now right for it to become ubiquitous.

Why use HTTPS?

There are numerous advantages to using HTTPS, both for the users of a website and for the operator:

Privacy

The most obvious advantage is that HTTPS gives your users additional privacy. An insecure (HTTP) request can potentially be read by anyone on the same network, or the network operators, or anyone who happens to operate a network along the path between the user and the server.

Users on shared WiFi networks (such as those in coffee shops, hotels, or offices) are particularly vulnerable to passive sniffing by anyone else on that network. If the network is open (as is frequently the case) then anyone in radio range can see exactly what the user is up to.

Integrity

HTTPS also helps to maintain the integrity of your site. With a plain HTTP request, there’s nothing to stop anyone in between the server and the user from modifying the content of the request or the response. This is a frequent tactic used by annoying WiFi gateways (such as the ones you’d find in a hotel), dubious ISPs who want to serve you extra adverts, or just plain old nefarious attackers.

If you’re trying to convey some kind of information to users (and if you aren’t, why exactly are you running a website again?) it seems beneficial to both you and them if the information arrives as you intended, rather than in a modified form due to someone or something tampering with it.

Security

If your website has any kind of authentication, or session identifiers, it becomes extremely vulnerable to an attacker monitoring the traffic and stealing the credentials. This was starkly demonstrated in 2010 when Firesheep was released. This tool allowed anyone to quickly and automatically hijack social media accounts of anyone on the same network who was using HTTP to access them.

Even if your login pages are served over HTTPS, if you send a single session ID cookie over HTTP (such as a page you decided wasn’t particularly ‘important’) then an attacker can probably spoof the user’s session and gain full access to their account. Again, in the case of open WiFi networks that could be anyone in radio range.

Search engine rankings

Some search engines use HTTPS as a signal in their ranking algorithms. Google announced in 2004 that it was using the presence of HTTPS as a small positive signal, but that it may strengthen that signal over time as more and more websites switch to using a secure transport. It’s not unthinkable that at some point in the future there will be HTTPS-only search engines.

But… But… But…

There are lots of excuses for not implementing HTTPS. Most of them are either misguided or outdated.

It’s too expensive and/or complicated

In the past, getting HTTPS certificates was a pain. A number of free suppliers have existed for a while but the process for getting their certificates wasn’t particularly straight forward, and many imposed arbitrary restrictions on the certificate parameters. Even once you had the certificate, you had to fiddle about with your HTTP server configuration to make it work, remember to manually get a new certificate when the old one expired, and lots of other annoying busywork.

With the arrival of Let’s Encrypt, all that changed. You can retrieve and deploy a free HTTPS certificate with two or three commands. Renewal can be handled completely automatically with a single command executed by cron.

There’s no point; nothing on my site is sensitive

You might not think your content warrants privacy, but can you speak for everyone who accesses it? Even content that seems mundane to you — such as travel advice, or technical writing — could be used to build up a profile of a user. If an attacker is monitoring traffic in a coffee shop and sees a user looking at travel advice and weather forecasts for a foreign country, he could use that information to plan a burglary knowing that the user will be away. Similarly, some content which is perfectly mundane to you may actually be very sensitive in other countries with repressive governments. HTTPS makes it much harder for these people to snoop on traffic.

From another angle, if you’re offering any kind of information, instructions, or especially file downloads, there’s a severe risk to users if the content is modified on its way to them. An evil sysadmin could rewrite your travel advice to suggest visiting the local drug dealer’s hangout, or replace your download with a malware-infested version.

HTTPS is slower, uses more resources, etc

Back in 1995 this might have been a valid argument. Enabling HTTPS on a modern server will make an almost negligible difference to performance. If you also enable HTTP/2 (which most implementations only support over HTTPS), it’s likely to actually use fewer resources, and result in a faster, smoother experience for your users. HTTP/2 was designed to work with HTTPS, and designed with modern requirements and networking techniques in mind.

CloudFlare have an excellent demonstration of the benefits of HTTP/2, and it can show speed improvements of 2-3x in a typical environment. On top of being faster, HTTP/2 uses fewer connections which results in less resource overhead on both the server and the client.

So what are you waiting for?

If you run a website and aren’t using HTTPS, give it a try.