Chameth.com - posts like artisanal-docker-images, modern-css-is-fun but not debugging-beyond-the-debugger, why-you-should-be-using-https

Migrating from GitHub to Forgejo

2026-04-30T00:00:00Z

When Microsoft bought GitHub in 2018 my kneejerk reaction — like so many others — was to start looking for alternatives. For a while I self hosted a Gitea instance but I never totally bought into it: some repositories I still pushed to GitHub, some I pushed to Gitea and they got mirrored, and I ended up causing myself problems when I got the two confused. Part of the problem was that the GitHub UI was faster and cleaner than Gitea’s at the time; using Gitea felt like a chore compared to GitHub. I ended up not maintaining it and eventually binning it and just going back to GitHub.

An all-too familiar unicorn

Fast forward eight years, and GitHub is about what we all imagined when Microsoft bought it. If you take the most pessimistic way of counting, they have zero nines of reliability¹. If you take the most generous, they have a single nine. That’s around 30 minutes of downtime every day. It feels like it must be more than that, given how many times you see the damned unicorn.

Uptime aside, they’ve crowbarred LLMs in all over the place; they don’t have the time to maintain official GitHub actions; the ones they do maintain have Copilot running roughshod all over them²; actions themselves are slow to run³, often have weird transient failures, and there are so many footguns that I’m pretty sure GitHub actions should be an entire category in the CWE top 10.

Speaking of security, while I was drafting this post a remote code execution was reported and the details are… impressive. The actual security issue was a pretty stupid oversight. Those happen. But they end up being able to execute code as a globally shared git user with access to all the other repositories on the node. What? I can’t quite get my head around it. No sandboxing, no containers, it just runs as a git user?

So, yeah, I’m not a fan of GitHub in its current state. A few months back I took the plunge and set up Forgejo, a fork of Gitea where they did radical things like add tests and ensure that it’s community operated not twisted for commercial use. Forgejo also potentially has some fun security problems⁴, but the way I host it mitigates more-or-less all problems. It’s also slightly less shocking when an open source project has lapses in basic security versus a $2 trillion corporation.

It’s taken a bit of doing, but I’m very happy with the setup I have.

The basic setup

I run all my server software using Docker, and Forgejo is no exception. They have decent documentation on how to get it running, and publish rootless images which is nice (and diminishes my urge to make an artisanal version myself). You can set configuration options using environment variables, which is perfect for containers, although the names can end up a bit unwieldy. Like this thing: FORGEJO__repository.signing__SIGNING_NAME=Chris Smith. It gets the job done, but the environment-to-ini mapping is pretty ugly.

I didn’t want to expose Forgejo publicly, as I wanted to avoid having to try and secure it⁵, or dealing with bots scraping it, or users signing up, and so on. I wanted somewhere to store my git repositories, handle CI for me, and mirror them somewhere public for other people to see and interact with. If you’ve read some of my other posts you’ll probably guess where this is heading: Tailscale. Alongside the Forgejo container, I run a Tailscale instance with a serve.json that covers both the web frontend and the SSH listener used for git operations:

{
    "TCP": {
        "22": {
            "TCPForward": "forgejo:2222"
        },
        "443": {
            "HTTPS": true
        }
    },
    "Web": {
        "${TS_CERT_DOMAIN}:443": {
            "Handlers": {
                "/": {
                    "Proxy": "http://forgejo:3000"
                }
            }
        }
    },
    "AllowFunnel": {
        "${TS_CERT_DOMAIN}:443": false
    }
}

This allows me to interact normally with Forgejo from any of my devices or servers (which all run Tailscale), while not exposing it to the Internet at all. It also handles the TLS certificates automatically, which saves me setting up something else to do that.

For CI, I run the Forgejo runner image on the same server, and gave it a dind container to use to actually run the workloads. dind is the cutesy name for Docker-in-Docker, basically a Docker daemon running inside a Docker container. That keeps the CI workload separated nicely from the “production” workload running on the server, which is nice from both a security and a monitoring point of view.

The uncanny valley of actions

Forgejo actions are basically like GitHub actions: they run a series of steps using one or more container images. You define those steps in the exact same clunky YAML format as with GitHub. The big difference between them is that GitHub defaults to using an absolutely massive base image filled with out-of-date preinstalled software, and Forgejo leaves that for the administrator to configure. You could, of course, just use the same image as GitHub, but lugging around a multi-gigabyte image that doesn’t even have recent versions of the software I want isn’t really my style. Instead, I set about using a plain debian image as the base, and then did a face-palm when I tried to run a “normal” action and remembered they’re all written in JavaScript, so expect node to exist.

Accommodating JavaScript isn’t really my style, either, so I did the very sensible thing of writing my own suite of actions in Go. Being written in Go means they can be compiled statically, published as a container, and manage their own very limited dependencies. For example, the checkout action is built into an alpine container with git added, while the dockerbuild action uses the buildah image as a base. Each image has the tools it needs, pinned to a recent version, and nothing more. This is very much not a sensible approach to take for most people, but it made me happy. With six basic actions, I could replace almost all the ad-hoc workflows I had in GitHub⁶.

Other than the base images and my self-inflicted JavaScript machinations, everything works the same as GitHub. But faster. So much faster. Most of my CI workflows finish on Forgejo before GitHub would even have allocated a runner to the job⁷. And I can actually view the logs without them glitching out.

Step aside Dependabot, here comes Renovate

One of the boons and/or banes of hosting code on GitHub is access to Dependabot⁸. It’s a tool that monitors your dependencies, and automatically submits PRs when new versions are available. It also does security alerts, but they’re comically bad for Go at least⁹. I do like having dependencies automatically handled, especially with a cooldown, which is how I had Dependabot configured before moving.

To replace it, I’ve configured Renovate, an open source alternative. I’d seen it used a bunch before: both by projects on GitHub who prefer it over Dependabot, and by people using GitLab and other platforms where Dependabot isn’t. It mostly does the same things, but Renovate has a few very nice extras.

Firstly, it supports transcluding config from another repo. So in each of my many, many projects, I just have this stub of a renovate config:

{
  "$schema": "https://docs.renovatebot.com/renovate-schema.json",
  "extends": [
    "local>meta/renovate"
  ]
}

Then the actual config lives in a default.json in the meta/renovate repository. I mirror that repository to GitHub, if you want to have a look. This is an amazing feature. When I enabled cooldowns in my Dependabot config it was a slog to go through all my active repositories and make the same change over and over again. With Renovate I can configure that centrally. As far as I know Dependabot can’t do anything like that, even for enterprises.

Within that central config I use some of the other nice features. It has the ability to auto merge changes. I use this to automatically accept changes from trusted projects, or my own libraries:

    {
      "matchManagers": ["gomod"],
      "matchPackagePatterns": [
        "^github\\.com\\/csmith\\/",
        "^chameth\\.com\\/"
      ],
      "matchUpdateTypes": ["minor", "patch"],
      "automerge": true,
      "minimumReleaseAge": "0 days"
    },
    {
      "matchManagers": ["gomod"],
      "matchPackagePatterns": [
        "^github\\.com\\/csmith\\/",
        "^chameth\\.com\\/"
      ],
      "matchUpdateTypes": ["major"],
      "minimumReleaseAge": "0 days"
    },

This takes any minor or patch release of my libraries, and automerges it with no cooldown. For major version changes it overrides the cooldown but doesn’t automerge. To automerge Dependabot PRs you have to write an action, implement that logic yourself, and hope you’ve successfully avoided all the footguns inherent in that.

Speaking of major version updates, Renovate also has an option to automatically update the imports in Go packages when it’s offering a major update. In the config I have:

"postUpdateOptions": ["gomodTidy", "gomodUpdateImportPaths"],

Which means that every time it does an update it’ll run go mod tidy, and it’ll update the import paths. In Go, v2 of a module has a different import path to v1 (so they can coexist if transient dependencies need different versions), so usually you have to go through and find and replace those paths. Renovate handles that for me now! I still have to address whatever breaking changes are in the new version, but there’s a lot less grunt work.

It can also run custom commands¹⁰, so for example in my legotapas project I have this extra snippet in the renovate.json:

  "postUpgradeTasks": {
    "commands": [
      "sh -c 'rm plate_*.go'",
      "go run ./cmd/generate"
    ],
    "executionMode": "branch",
    "fileFilters": ["*.go"]
  }

I won’t go into the gory details, but this handles automatically regenerating a bunch of files that change every time a certain dependency is updated. Previously I had a separate action to do that on GitHub; just being able to drop commands in the config file is much nicer.

To actually run Renovate, I simply have a workflow in Forgejo on a schedule that uses their official Docker image. It also triggers if I update the config, which is nice when I add a new rule, as it’ll immediately update the open PRs to comply. Overall, Renovate has felt like a pretty big quality-of-life upgrade.

Odd problems

Not everything has been smooth sailing. Sometimes when Renovate automerged a change, it would just… disappear. The PR was closed as merged, but the commit never landed on master. It wasn’t a huge issue as the next Renovate run would just recreate it, but it would then disable the automerge and I’d get confused as to why. It turns out there was a major problem with how I had everything set up. Renovate was telling Forgejo to automerge when the required checks pass, but I had no branch protection rules set up in Forgejo, so as soon as the PR was created it was eligible to merge. As the CI was so fast I hadn’t noticed that the automerges were happening before the CI results were posted.

The disappearing commits were because the repository was getting into a bad state when Renovate tried to automerge multiple changes instantly in the same repo. Forgejo has a bunch of maintenance commands that helped to fix that problem, and I then wrote a little script to enable branch protection rules so the CI would actually run. The automerging has been smooth since.

Another issue I had early on was that merging would fail because the GPG keyring was locked. I had Forgejo configured to sign all the automatic commits, so you can verify what commits came from my infrastructure. Forgejo is the only process using the keyring, so I wasn’t sure why it was becoming locked. It turns out that GnuPG uses the hostname as part of the lockfile, and because Forgejo was running in Docker it was getting random hostnames based on the container ID. Explicitly setting a hostname made GnuPG and by extension Forgejo much happier.

Webhooks and updating

Forgejo has this amazing feature: you can add a webhook that’s called for all your repos. GitHub, for some reason, supports this for organisations but not people. Even though the two are treated the same in a lot of places. It doesn’t seem like it would be hard, and it’s such an obvious thing to want, but… no. I wrote a whole tool to add webhooks for me to get around this. Now I don’t need it, Forgejo does the right thing!

One particularly interesting use of these webhooks has been making my Docker containers auto-update when a new image is pushed. I previously had a webhook receiver for a few projects that would update them automatically, but GitHub package notifications were extremely laggy. Every other webhook fired within a minute or so of the event happening, but package webhooks would sometimes take 30-60+ minutes to fire. I opened a support case with GitHub and it got escalated to engineering and fixed about 10 weeks later¹¹. It was better for a while, and then got worse again. Trying to do continuous deployment with a 30 minute random lag was frustrating.

So now I had reliable webhooks, but the update process was a bit gross. I have a hangup about internet-facing services not having access to the Docker socket. It just feels like too big a security risk. So I had a process that received hooks, and then another that figured out if containers needed to be updated and restarted them. Adding a new container to the system meant recompiling the second process, which was a massive faff.

Fortunately, I was saved from this mess by my friend Greg. He wrote adze, a tool that receives webhooks and uses Docker Compose to update matching containers. He wrote a blog post about it. It’s all one process, but that’s no longer a blocker for me because the webhooks can be delivered privately from my Forgejo instance without exposing adze to the internet. It finds matching containers automatically based on the images they’re using¹², and combined with Forgejo not forcing me to add a webhook to every single repository makes my life so much easier. I write some code, push it to Forgejo, and within a minute or so it’s running on my dev instance.

I have IRC notifications set up for when adze does updates, and I still have some old ones that announce GitHub package webhooks. I keep seeing things like this and chuckling:

15:44:42 <@ircjag> [ADZE] chameth.com: pending updating git.yak-wall.ts.net/public/chameth.com
15:44:45 <@ircjag> [ADZE] chameth.com: success updating git.yak-wall.ts.net/public/chameth.com
17:11:54 <@ircjag> [GHCR] Container pushed to csmith/chameth.com:dev.

I pushed a change at 15:43, Forgejo built it and pushed the image (to both its own registry and to GitHub), then at 15:44 adze updated the container to the new version. An hour and a half later GitHub gets around to delivering its own webhook.

Mirroring and PRs

The final piece I had to figure out was how to actually interact with people. Most of my projects are small and don’t get a massive amount of public contributions, but the option should still be there. And ideally not involve anyone having to figure out how to e-mail patches¹³.

Mirroring outwards is simple: Forgejo supports it natively. Whenever I push to Forgejo, it pushes out to the corresponding repo on GitHub. I’ve also started mirroring some projects to Codeberg, to avoid having GitHub as my single “public” presence. But what happens when I get a pull request? If I merge it in the GitHub web UI, Forgejo will push its own branch over the top and get rid of it¹⁴. I could pull the changes, merge them, and push the result to Forgejo but then I don’t get the benefit of any CI.

I ended up writing a small private tool that deals with this for me. I give it a GitHub PR, and it effectively imports it into Forgejo for me. I created a prs organisation, and it’ll create a fork of the project in that org if it doesn’t exist. Then it pushes the PR contents to a branch, and creates a PR from the prs repo into the main one. It runs as a user which can write to the PRs org, but only submit pull requests to public repositories outside of it.

When the PR is imported, I can review it in the Forgejo UI, and then I can approve the CI workflows for that particular PR. This gives me some extra defence-in-depth in case anyone is trying to abuse one of those action footguns. Once the CI passes, I can merge it as normal in the Forgejo UI, it gets mirrored out to GitHub, and GitHub marks the PR as merged automatically. It’s not the most elegant solution, but the actual workflow is pretty smooth, especially for the low volumes of PRs I get.

With that, I have Forgejo set up to do everything I need from a git host, and I’m no longer hamstrung every time GitHub goes down.

This way of counting isn’t particularly fair, but it’s somewhat realistic. GitHub break out their uptime for things like git operations, pull requests, actions, webhooks and packages. Realistically if any of those independent things are down then my overall workflow doesn’t, well, work. ↩︎
To be clear, I’m not objecting to the use of Copilot here. It’s a tool. But if you use a tool to do something fairly simple and it spews out 35 commits, including at least 5 reverts, then either it’s a terrible tool or you’re using it very wrong. I didn’t hunt down this example, I came across it while trying to debug something and wasted a bunch of time trying to figure out what on earth was going on. ↩︎
You could self-host runners, which may help, except they’ve already threatened to charge you for the privilege of bringing your own runners. ↩︎
If people could stop finding RCEs in git services for a few days so I can stop redrafting this intro, that’d be great. ↩︎
I’m feeling pretty smug about this decision after reading about the security issues. ↩︎
There’s one holdout: my dockerfiles repo which is a very special snowflake with a very complex workflow and I’m still deciding how to handle it. ↩︎
Which is to be expected, given I’ve got a server dedicated to one person, and they’re trying to serve however-many million users at once. That doesn’t make it any less nice, though! ↩︎
I’d link to it but there’s nowhere really good to link to. It’s just been subsumed into the ‘security’ functions of GitHub, along with a bunch of copilot nonsense. ↩︎
The go project maintain a vulnerability database that includes details about which exact symbols are affected, and the govulncheck tool uses this to only report security issues in code that’s actually used. Dependabot doesn’t do that: it constantly alerts about code that’s not imported, so won’t ever be shipped. ↩︎
In the default config it doesn’t allow anything of the sort, of course. You can whitelist individual commands, but because this is a private server I can merrily whitelist .* and do whatever I like. ↩︎
The turnaround time isn’t particularly impressive, but the fact that they kept the support case open, and the (human!) support agent updated me several times is. I don’t have a lot of good things to say about GitHub, but I don’t think I’ve ever had a support experience that good from a company of a similar size. Especially as I wasn’t a paying customer at the time. ↩︎
Why didn’t I do that in the first place? It seems so obvious now… ↩︎
I really like the idea of an e-mail based workflow, but I absolutely hate actually doing it. ↩︎
This is what happened to me a lot when I was half using Gitea. ↩︎

Monthly Meanderings: March 2026

2026-04-01T00:00:00Z

Since last month’s update I’ve been unpleasantly reminded that I’m middle aged, through the medium of a dodgy knee. There’s nothing quite like not being able to stand up without groaning to underscore that you’re not young any more. The ongoing game of “will this seemingly mundane activity make my knee go funny again?” is a delight to play, too. I’m great at it.

Website updates

Two new blog posts this month: the longest way to represent a date is a short thought experiment on absurd date formats, and modern CSS is fun goes through some neat new CSS features I’ve used recently for this site.

I did some design tweaks this month: headers now have a blue background behind them¹, and a lot of components have been redesigned to have a consistent style. You can see that component in action in the new “now playing” widget I’ve added:

Taylor Swift — …Ready for It? reputation Scrobbled 2m ago

Instead of each component defining its own styles (which were mostly copied and pasted), there’s now a single class that handles the drop shadow, border, background colour, and the optional title. It also applies a consistent format to elements that are clickable: they use the blue accent colour for their borders, and have a glow effect shown on hover.

The now playing widget is part of a larger bit of work I did on importing some music stats. I’m pulling in the data from my Navidrome instance. A new music page shows my most listened albums and artists. Navidrome doesn’t store a complete play history, just the last play and the count, so I can’t do “what I listened to last month” stats until next month.

Other projects

Other than a minor bug-fix update to contempt, my Dockerfile templating/updating tool, I’ve not done much on my other open source projects. I’ve got a bit more work to do finish migrating all my repositories from GitHub to my private Forgejo instance. I’ve also been thinking about mirroring my public repositories to Codeberg so there’s a non-GitHub way to access them.

Entertainment

I apparently only watched a single film in March:

The Substance

2026-03-18

I really didn’t get on with this. It’s too long for what it is, and over-the-top in a way that just didn’t work for me.

Demi Moore and Margaret Qualley were great, but nothing else really was. The cinematography and sound design were too affected, the plot was pretty shallow and obvious, most of the body horror fell into the uncanny CGI valley for me.

It’s not completely without merit: there were around 40 minutes in the middle where I was really into it, but that’s not really enough given it’s closing in on a 2.5 hour runtime.

There’s something to be said for the message it’s presenting about women in Hollywood, too, but it was very heavy handed. Dennis Quaid’s character is even called Harvey; it’s not so much a subtle nod as a sledgehammer to the face.

Instead of films, I’ve been watching a bunch of TV. After devouring The Pitt last month, I struggled to find something to fill the hole it left. I settled on catching up on Chicago Fire and Chicago P.D.. They’re both mostly about getting things done without personal drama becoming the primary focus. They’re not quite as grounded as The Pitt, but at least they’ve not completely gone off the deep end like 9-1-1 where the first responders end up in space somehow?

I’ve also watched the first two episodes of SNL UK. I didn’t have very high expectations, and it gave me a pleasant surprise. Both episodes so far have some hilarious sketches, and are obviously written by British comics with the typical darker, more sardonic humour that separates us from the USA.

Last but not least, board games! I spent a weekend at a tabletop/LAN event with friends, so got to physically play some games for a change. I also kept up with some turn-based games on Board Game Arena, as usual.

6 plays
4 plays
4 plays
4 plays
3 plays
3 plays
3 plays
2 plays
2 plays
2 plays
2 plays
2 plays
1 play

Around the web

Warranty Void if Regenerated

Some really cool speculative fiction about a future where all software is written by LLMs, and the social effects that may have. Unfortunately the story itself is written with an LLM, and that becomes painfully obvious about a third of the way in. By that point I was already hooked, though.

My 2-step process for AI-free blogging

Speaking of LLM-generated text, this short piece by Manuel Moreale made me laugh. I’m by no means anti-LLM, but I really hate people publishing the output like it’s their own work. It breaks the social assumption that the writer put more effort in than the reader, and makes me wonder how much is hallucinated.

25 Years of Eggs

An interesting applied use of coding agents. I’m a sucker for personal statistics. I have no explicit desire to keep my receipts, or generate graphs of my egg consumption, but seeing the graphs makes me question that. The journey to get there is a great read, too.

I made a one-page notebook

The clever paper folding is interesting, but I really like some of the small touches on the page. There’s a nice little “in reply to” callout providing context at the top of the page, you can click to rotate the image further down, and there’s a details element containing a textual version of it. It has that great ‘small web’ vibe of someone who really cares about what they’re doing.

Workers who love ‘synergizing paradigms’ might be bad at their jobs

I haven’t read the full paper, but the summary given by the article is equal parts interesting and amusing. They developed a “Corporate Bullshit Receptivity Scale”, what more is there to say?

It’s meant to resemble painter’s tape, but I’m not sure quite how well it works. ↩︎

Modern CSS is fun

2026-03-17T00:00:00Z

I’ve been doing a bunch of CSS tweaking recently, and keep being surprised by how nice modern CSS is to work with. As someone grey-haired enough to remember writing HTML without CSS, it’s amazing to think how far along web technology has come¹. I wanted to demonstrate some of the handy bits and pieces I’ve used recently.

:has

The :has selector allows you to effectively query for child elements. While a span will match a <span> within an <a>, a:has(span) will match an <a> that contains a <span>. This really shines when combined with more complex selectors, for example:

input {
    border-radius: var(--border-radius);

    &:has(+ .results:not(:empty)) {
        border-bottom-left-radius: 0;
        border-bottom-right-radius: 0;
    }
}

This is part of the styling for my film search box. When the search box is presented initially it has fully rounded corners. But when it is followed by a non-empty results element, it removes the rounding on the bottom corners so that the border continues in a straight line down into the results. You can see it in action below; just enter a few characters (like “the”) to get some results:

You could achieve the same effect by having JavaScript add a class to the <input> element, but I’ll take a CSS solution over a JavaScript solution any day.

Nested rules

You probably spotted this in the example above. It’s what finally made me switch from SCSS to plain CSS. If you have a rule for .foo and a rule for .foo .bar you can just nest them. Not only does it save repeating yourself an awful lot, it keeps everything organised nicely. For example, the CSS for my film list embeds looks like this:

a.film-list {
    display: grid;
    grid-template-areas: "header images" "description images" "meta images";
    grid-template-columns: 1fr auto;
    grid-template-rows: auto 1fr auto;
    row-gap: var(--small-space);

    @media (width <= 800px) {
        grid-template-areas: "header" "description" "images" "meta";
        grid-template-columns: 1fr;
        grid-template-rows: auto auto auto auto;
    }

    & + & {
        margin-top: var(--medium-space);
    }

    h3 {
        font-size: var(--font-size-xxlarge);
    }

    .description {
        /* ... */
    }
}

Everything is wrapped up in a single bundle, including the @media rules for changing the layout on smaller screens, the lovely little & + & rule that adds some extra margin if there are two lists in a row, etc. The & syntax refers to the parent selector, so & + & in this case is the same as a.film-list + a.film-list: it’s very handy! The best part about this is that it’s the exact same syntax as SCSS, so converting is easy². The styled element looks like this:

Watched films ranked

Every film I’ve watched since I started logging, ranked.

Obviously super subjective, and subject to change often and arbitrarily.

264 films

Media range syntax

Once again, you might have spotted this in the previous snippet. I’m not deliberately teasing things, I promise! Back in the day, you did media queries like so:

@media (min-width: 1000px) and (max-width: 2000px) {
    /* some rules that work for screens at least 1000px wide and at most 2000px wide */
}

I always hated this syntax. I always got muddled up as to whether I wanted “min” or “max”, and whether they were inclusive or not. It’s easy to reason through, but it never came naturally. Fortunately you can now just use ranges:

@media (1000px <= width <= 2000px) {
    /* some rules that work for screens at least 1000px wide and at most 2000px wide */
}

I find this style so much easier to write and understand.

Anchor positioning

Trying to dynamically position one element next to another used to exclusively fall within the purview of JavaScript. Fortunately anchor positioning fixes all this. I use this in the film search field I showed above:

.film-search {
    input {
        anchor-name: --film-search-box;
    }
    .results {
        position: absolute;
        position-anchor: --film-search-box;
        position-area: bottom center;
        position-visibility: always;
        width: anchor-size();
    }
}

This does lots of fun things. The .results element is anchored to the input field (via the --film-search-box name), and it’s positioned on the bottom, directly under the anchor. The position-area rule describes a 3x3 grid, with the anchor at the center, so top left would put it diagonally adjacent to the anchor. Next, position-visibility keeps the .results element visible when the anchor isn’t; otherwise when you scroll the anchor off the screen the results would immediately vanish. Finally, the special anchor-size() function makes the .results element take up the same exact width as the anchor.

All-in-all, this puts the results exactly where I want them, without having to deal with any JavaScript at all. I can see how it’d also be amazingly useful trying to do tooltips or other forms of ‘floating’ content too. You can even leave the positioning up to the browser, giving it hints about which order to try, or what property to optimise for (e.g. you can say “anchor to the left or right, whichever has more horizontal space”).

attr() function

This one blew my mind a little. In some of the elements on the site, I’ve added a little label to the top. It looks something like this:

It’s meant to just be a visual flourish, not a semantic title or anything, so I initially just added a ::before selector to each element, customising the content to have the right value. I didn’t like the duplication, though. Now, instead, I do this:

&::before {
    content: attr(data-title);
}

Each component defines its title in a data attribute: <div class="raised-box" data-title="an example">, and the attr function plucks it out and puts it in the content rule. It’s worth noting that this is only widely supported for the content rule, you can’t yet use it for colours or dimensions or other things. It still feels a bit magical, though. Like you’re making a reusable, customisable component with just HTML and CSS.

layers

I’d come across layers a few times, but I never found a need for them. It seemed like something you’d only really need with complicated design systems, or something. Then I had a problem and layers were the perfect solution!

The headings on this site have a whole bunch of CSS attached to them. Currently they look a bit like blue painter’s tape with handwriting on them. This style is applied to all headers, and then the various places that don’t want it had to manually reset everything. I got fed up with that, so decided to add a plain-header class which would “disable” the extra styling:

h2,
h3,
h4,
h5,
h6 {
    /* common styles for all headers, regardless */
    font-family: "Chris Hand", sans-serif;
    font-size: var(--font-size-xxlarge);
    color: var(--text-highlight-colour);
    margin: var(--medium-space) 0;
    line-height: 1;

    &:not(.plain-header) {
        /* do fancy stuff if it _doesn't_ have the .plain-header class */
        transform: rotate(-0.15deg);
        padding: var(--smedium-space);
        font-weight: 800;
        filter: drop-shadow(3px 3px 5px rgb(0, 0, 0));

        a {
            background: none;
            text-decoration-skip-ink: auto;
        }
    }
}

This might seem a bit backwards but I want the default to be styled, as those are far more common. I added this change, sprinkled around some “plain-header” classes, tidied up a lot of duplicate CSS, and things mostly worked. Mostly. Some things stopped working. In a few places the headers had slight tweaks, and they stopped working entirely.

It turns out in moving the rules from a plain h2 selector to a h2:not(.plain-header), I’d made them more specific. Previously a selector like h2.special would have been more specific, so its properties would override those from the less specific h2 selector. My first reaction was to try and hack around it. Changing all the overrides to body h2.special would make them more specific again, but I didn’t want to have to remember to do that forever more.

Instead, I defined some custom layers, and put the header definitions in one:

@layer reset, links, headings

@layer headings {
    h2,
    h3 {
        /* etc */
    }
}

The first @layer rule defines some layers that will be handled in a specific order: first the “reset” layer, then the “links” layer, then the “headings” layer, and then anything not in a layer after that. Rules in one layer don’t have to worry about beating the specificity of rules in another layer, because they’re handled separately.

Note that I couldn’t just put the headings in a layer and call it a day: their rules have to come after the CSS reset, and after the normal link styles, as headers have a bit of extra styling for nested links. If the CSS reset weren’t in a layer, then the * { margin: 0; padding: 0; } type reset would apply over the rules from the headings layer.

Using layers is definitely a bit fiddly, and is not necessary for a lot of sites, but it’s a much cleaner alternative to ugly specificity hacking.

Things I’m looking forward to

There are a few things that aren’t (widely) available yet, that particularly interest me:

sibling-index() and sibling-count()

These new functions are available in WebKit and Blink based browsers, but not Firefox. They give you the index of the element within its siblings, or the count of siblings. For the film list component above, I currently have this abomination for the overlapping posters:

&:nth-child(1) {
    z-index: 5;
    left: 0;
}
&:nth-child(2) {
    z-index: 4;
    left: calc(133px * var(--overlap) * 1);
}
&:nth-child(3) {
    z-index: 3;
    left: calc(133px * var(--overlap) * 2);
}
&:nth-child(4) {
    z-index: 2;
    left: calc(133px * var(--overlap) * 3);
}
&:nth-child(5) {
    z-index: 1;
    left: calc(133px * var(--overlap) * 4);
}

These could be replaced with something like:

z-index: calc(1 + sibling-count() - sibling-index());
left: calc(133px * var(--overlap) * (sibling-index() - 1));

As an added bonus, it would scale to any number of posters. index being 1-based not 0-based is a bit unfortunate as it makes using it in calculations awkward (see 1 offset in both of those rules!), but it’s leagues better than writing 5 separate rules.

random()

Currently only available in Safari. There are a few places where I’d like to have slight random variations of the style. Things like elements that are rotated slightly for aesthetics; they look a bit silly if they’re all identically positioned. I also randomise the icons and positions of my rating stars to break up the visual monotony. Here are a few examples:

Currently I do the stars by hardcoding a bunch of classes and having the backend randomly apply one when it generates the markup for stars. Being able to do it in CSS would be great, though.

Mixins

This one’s so far off it’s not even listed on caniuse.com yet. Mixins are another handy feature of SCSS, that allow you to define reusable blocks of rules, then import them when needed:

@mixin fancy-background {
    background: /*...*/;
}

.some-element {
    @include fancy-background;
}

#other-element {
    @include fancy-background;
}

This would be particularly useful if you can’t easily control the markup to add classes to everything. For example, my footnotes are rendered by a markdown plugin, and don’t easily have a way to add extra classes to them. To style it the same as another element, I currently duplicate a bunch of rules between them both. Mixins would allow me to define those rules once, and then import them in both places.

Aside from JavaScript, which seems to just endlessly reinvent new frameworks and ways to make the most sprawling dependency tree possible. ↩︎
It also means that if your website’s syntax highlighting library doesn’t seem to understand nested rules, you can just pretend your perfectly valid CSS is actually SCSS and it’ll magically work. Grumble, grumble. ↩︎

Reproducible Builds and Docker Images

2022-02-18T00:00:00Z

XKCD 2347: Dependency

Reproducible builds are builds which you are able to reproduce byte-for-byte, given the same source input. Your initial reaction to that statement might be “Aren’t nearly all builds ‘reproducible builds’, then? If I give my compiler a source file it will always give me the same binary, won’t it?” It sounds simple, like it’s something that should just be fundamentally true unless we go out of our way to break it, but in reality it’s actually quite a challenge. A group of Debian developers have been working on reproducible packages for the best part of a decade and while they’ve made fantastic progress, Debian still isn’t reproducible. Before we talk about why it’s a hard problem, let’s take a minute to ponder why it’s worth that much effort.

On supply chain attacks

Suppose you want to run some open-source software. One of the many benefits of open-source software is that anyone can look at the source and, in theory, spot bugs or malicious code. Some projects even have sponsored audits or penetration tests to affirm that the software is safe. But how do you actually deploy that software? You’re probably not building from source - more likely you’re using a package manager to install a pre-built version, or downloading a binary archive, or running a docker image. How do you know whoever prepared those binary artifacts did so from an un-doctored copy of the source? How do you know a middle-man hasn’t decided to add malware to the binaries to make money?

Even worse: if the software you’re trying to use includes any dependencies, you have the same issue of trust with them. Maybe your supplier isn’t compromising the software, but that doesn’t mean their supplier isn’t. The beauty-cum-horror of a supply chain attack is that it can target the weakest link anywhere along the supply chain. Even if there aren’t any binary files involved, dependencies can still be attacked: what if npmjs.com or proxy.golang.org or github.com return a different version of a dependency-of-a-dependency when the request comes from your IP address? It doesn’t even need to be a modified dependency, it could be a perfectly un-tampered, properly signed copy of the source, just from an older version with a known vulnerability.

Enter stage left: reproducible builds, here to save the day! If the build process is reproducible then you - or anyone else on the internet - can perform the same build on the same source and validate the output has the same checksum or hash. If Debian publish a binary package and an independent re-builder comes up with the exact same build artifact, there’s a reasonably good chance that the build is good. An attacker would have to compromise both the build machine and the re-build machine to do anything nefarious. The more re-builders there are, the less feasible a supply chain attack is.

So why isn’t software just reproducible?

Compilers

As a bit of an experiment, I asked some friends to run the following for me and report the answer:

echo -e "#include <stdio.h>\nint main() { printf(\"Hello\"); return 0; }" | \
  gcc -x c -o hello.out - && \
  sha256sum hello.out

This compiles a super-simple hello world program and then prints the SHA-256 hash of the resulting binary. Here are the results:

Hash	System	GCC
1f62feab5a06861dc575201d807781926d1ae49fb113da018fde8b670a1346f7	Arch	11.2.0
b8e6f2c7082be69f65ffa5e7a3d749eb47866a1b2e1ec19efb63cc59a8b160cd	Debian	8.3.0
cbad2e47a22c234b5e7fa55e029a8db4d64ac7a962e2176bd2e1373d78954088	Debian	8.3.0
e0f6bbc13b29fea8cfa2a975ba4661e781323298aec166c8311d342e6f93c4a6	Alpine	10.3.1
e379156895e06c7a0bf18ac4d648860edcb2655576b0ab9fab172bd6c8b92075	Debian	10.2.1
7ffdaee4eb64e016b89dc5e54d2c8eebab3cebafe2c7aa97de627b5972ecea46	Debian	11.2.0
8ae52cc166743b6ae1eb3e14179ef33de5061a04237f8f97088c896c41a2f698	Arch	11.1.0
8ae52cc166743b6ae1eb3e14179ef33de5061a04237f8f97088c896c41a2f698	Arch	11.1.0

As you can see, there are barely any duplicates. Even the same version of GCC on the same OS sometimes produces different results. And this is the most basic program I could write! Differences arise from the compiler version, the build flags, the libraries installed, and a whole host of other factors. If you compile a Go application instead of a C one, then by default the compiler will include debug information in the binary. This includes the full path to the source file on disk, so building a project in /home/chris/ will produce a different binary to building the same source in /tmp. Future versions of Go are also going to stamp in other meta-data such as VCS info, so building inside and outside a Git repository will produce different binaries.

Iteration order

So we’ve pinned our build environment, we’re manipulating timestamps when adding files to archives, now what? Imagine part of the build process involves looping through all the files in a directory and doing something. What order do these files get iterated in? Well, that very much depends on the filesystem and perhaps when the files themselves were created. To ensure this is reproducible we need to explicitly sort any such operation so that it’s always consistent. This iteration could be happening in a tool that’s called by another tool that’s called by a build script, so the fix isn’t necessarily straight-forward.

Side note: a bug war story

I’ve personally been victim to this kind of non-determinism. I was working on an Android app, and committed a new test that worked fine on my machine, and worked fine on the CI server. But it failed consistently for a colleague.

We both did fresh checkouts of the source, and ran the tests. Mine passed, his failed. He sent me an archive of his checkout in case there was something weird going on there, and the tests passed on my machine. We compared hashes of our checkouts, and they were the same. It was obviously environmental somehow, but everything else worked fine, and the build system went to great pains to ensure things were the same.

After a lot of debugging, I worked out that his test was running with a different version of a library to me, despite the libraries being defined in the build files and the build files being identical. After even more debugging it turned out there were two versions of the library on the classpath, and the ordering of them was different between my machine and his.

The actual issue turned out to be that the build tool generated the classpath by iterating over the library files, and that iteration was done in order of file creation time. The two libraries were added at different points in the project history, so the creation time in your local cache depended on which versions of the app you’d built in the past. With no cache everything worked as expected but there was a slim range of commits where only one library was in use, and if you had run the tests during that period your cache was effectively poisoned.

We fixed the issue by excluding the older version of the library (which was being pulled in as a transient dependency), and filed a bug against the build tool to make the classpath properly deterministic. I think that stands as the most difficult to diagnose bug I’ve ever dealt with.

Interestingly, if you iterate over a map in Go, the iteration is deliberately non-deterministic. That’s an attempt to defeat Hyrum’s Law and prevent developers from relying on whatever the current behaviour happens to be. This actually makes it easier to make things reproducible as the problem is loud and in-your-face, rather than subtle and hard to spot.

Other sources

There’s an awful lot of other places that non-determinism can come from. If the app pulls in dependencies, their versions have to be pinned, otherwise your build changes depending on the latest release of that dependency. If the build process pulls any information from a website, it’s liable to change. Hopefully the website is under your control so that you can version the resource and pin that version. Obviously, anything to do with dates or the current user will probably cause problems. Timezones and locales can cause subtle differences.

What about Docker?

Docker comes with some good and some bad points for reproducibility. The biggest advantage is that it inherently completely describes the build environment; it should work exactly the same from one system to another, even across different OS families. The biggest drawback is it sprays timestamps around like no-one’s business. Each layer in a container image is a .tar.gz file, meaning each file within it is timestamped as discussed above. Making an image involves a lot of copying of files around, so these timestamps invariably end up causing reproducibility issues.

Even worse than timestamps in the filesystem, the image format also contains some meta-data that includes the timestamp at which each layer was built. That means even if you go out of your way to set the timestamp of every single file in your image, the image itself will be different every time you rebuild it. There is no way to deal with this in Docker, which is a very sad state of affairs. Fortunately, Buildah provides a --timestamp flag for its build commands; this not only sets the layer timestamp but also the creation timestamp of any file within the layer.

The other major issue that affects Docker images is the pinning of packages pulled in by package managers. An awful lot of images are based on Alpine or Debian derivatives, and use apk or apt to install dependencies. These need to have a version specified as otherwise the package manager will just pull in the latest at the time of the build. But this isn’t quite enough: you also need to pin the version of any packages that they depend on, recursively. This means flattening the entire package hierarchy and installing all the packages explicitly and with pinned versions.

One more wrinkle in the package management space is that Alpine don’t keep old packages in their main repositories. If you have a Docker image with pinned alpine packages in, it will stop building if the package is updated. This isn’t necessarily fatal to making a reproducible build — as long as it’s reproducible for its useful lifetime, I don’t really see an issue.

Honestly, though, the biggest issue with making Docker images reproducible is getting people to care. Dockerfiles are a relatively new way of packaging software, and there’s no centralised organisation like you find with Linux distributions. There are enough challenges that most casual packagers aren’t going to bother, and no real incentive for them to. That won’t stop me trying, though!

Artisanal Docker images

2022-02-05T00:00:00Z

Artisanal containers…

I run a fair number of services as docker containers. Recently, I’ve been moving away from pre-built images pulled from Docker Hub in favour of those I’ve hand-crafted myself. If you’re thinking “that sounds like a lot of effort”, you’re right. It also comes with a number of advantages, though, and has been a fairly fun journey.

The problems with Docker Hub and its images

Rate limits

For the last few years, I’ve been getting increasingly unhappy with Docker Hub itself. Docker-the-technology is wonderful, but Docker-the-company has been making some rather large missteps. The biggest and most impactful of these has been introducing “pull rate” limits. At the time of writing, if you want to just pull a public image without logging in then you are limited to 100 pulls every 6 hours. If you log in then you’re limited to 200 pulls per 6 hours, but it’s account wide. This might seem like a big enough number, but I repeatedly hit it and there is no way to actually audit what is causing it. I have various containers that may all pull images at arbitrary times (e.g. continuous integration build agents), and the only information you get back from Docker Hub is the number of pulls remaining.

Obviously, I could start paying Docker Hub for a “Pro” plan. That gets you 5,000 pulls per day for $7/month. The downside is that every docker client would have to be authenticated, which presents a fair annoyance in terms of credential management. I also don’t really like how they positioned the service as a public utility with special treatment in the docker software, and then start tightening the ratchet to make money.

“Bad” images

I’m fairly opinionated about what a container image should look like: most importantly it should run just a single process, and only include the bare minimum dependencies required for that. Other people think differently, and it’s very hard to tell at a glance whether an image on Docker Hub contains just the application you want, or whether it also bundles MySQL, Redis, Elasticsearch, and a partridge in a pear tree. Some people want that kind of thing, but I really don’t. It’s also very hard to tell whether an image is officially endorsed by the upstream project, and where the source Dockerfile is. This used to be better because most projects used Docker Hub’s automatic builds, but they’re now a “pro” feature.

I quite often found that I’d be looking for an image for X, and there would be 5-10 images from different users. None of them looked official, some of them were out-of-date, some bundled the kitchen sink. Even when one looked good, it’s a bit of a gamble whether the author is going to keep it updated or not.

Doijanky

The rate limits and other problems were annoying, but they weren’t really annoying enough to force me to do anything about it. The straw that broke the camel’s back came later: I was looking at the official golang images, and noticed that all the tags were pushed by a random user account called “doijanky”:

An ‘official’ Docker Hub image pushed by user ‘doijanky’

I, perhaps naively, assumed that official images were built on Docker Hub’s own infrastructure. Why would all the Golang images be attributed to this user? Checking out their profile, they’re simply identified as a “Community User” like everyone else, with no repositories of their own. The only thing in the profile is their homepage, which is a link to a Jenkins dashboard: https://doi-janky.infosiftr.net/. It appears legitimate: “Infosiftr” are a container consultancy and the dashboard is linked to from the README in the official images git repository, but I find it baffling that they’re using third-party infrastructure and a normal user account (with a dubious name) to push these images. There doesn’t seem to be a good way to verify what you pull corresponds to the Dockerfile it came from; if infosiftr wanted to inject something into the build they could happily do so, and who knows how good their infosec posture is? If someone got access to the “doijanky” account, how long could they upload malicious images before someone noticed?

This little roller-coaster ride from “are all the official images compromised?!” to “oh, no, they’re not, it’s all just awful” finally convinced me to look at building my own images from scratch.

The implementation: templating with contempt

One of the big issues I needed to tackle was how to deal with updates. I didn’t want to have to go and edit a file every time some minor release was made of some software, or every time there was a security vulnerability in a common library. The official images use a shell-scripting based system to check for updates and generate Dockerfiles, I decided to do something similar but with Go templates. The result is a tool called contempt. It takes a template like:

FROM {{image "golang"}} AS build

ARG TAG="{{github_tag "example/project"}}"

RUN apk add --no-cache \
        {{range $key, $value := alpine_packages "git" -}}
        {{$key}}={{$value}}\
        {{end}}; \
# ...

Contempt has support for getting information from a variety of sources. In this case, it’s getting the latest digest of another Docker image, the latest tag from a Git repository, and the latest version of an alpine package and all its dependencies. The resulting Dockerfile looks something like this:

# Generated from https://github.com/csmith/dockerfiles/blob/master/miniflux/Dockerfile.gotpl
# BOM: {"apk:brotli-libs":"1.0.9-r5","apk:busybox":"1.34.1-r4", <snip> }

FROM reg.c5h.io/golang@sha256:ac8fa5f4078b0a697796b5d741... AS build

ARG TAG="2.0.35"

RUN apk add --no-cache \
        brotli-libs=1.0.9-r5\
        busybox=1.34.1-r4\
        # <snip>
        pcre2=10.39-r0\
        zlib=1.2.11-r3\
        ; \
# ...

I’ve cut out the longer parts for readability. You can see that it pins all versions of the alpine packages in use, as well as the base image. This ensures that if you build from the same Dockerfile at a later time it will build the same image (or will fail entirely, as Alpine doesn’t keep their old packages around indefinitely). It also produces a “bill of materials” as a really long JSON-encoded comment. If you let contempt commit the Dockerfile it uses the BOM to generate useful commit messages like: [project] apk:busybox: 1.34.1-r3->1.34.1-r4, so you can see exactly what changed.

Contempt also has support for building and pushing images whenever it changes the Dockerfile. I use it in a GitHub action that runs daily to check all my images are up-to-date and push those that aren’t. It understands the dependencies between images (by pre-analysing the templates) so it will always check and build base images before ones that require them. This means an update to, say, the “alpine” base image will cause anything that depends on it to get updated at the same time, ensuring security updates are rolled out promptly.

The result

You can see my collection of lovingly hand-crafted Dockerfiles in my dockerfiles repository.

There are a number of advantages to handwriting all the images I use. The obvious one is that they’re all built how I want: there are no extraneous dependencies, they’re all based on the same small set of base images (rather than pulling around 10 different versions of debian), nothing tries to also run a DBMS in its container, etc.

This level of customisation goes further, though. Because I’m packaging the software myself, I can tweak how it’s built to fit my needs. A couple of things I run need their own TLS certificates separate from my normal HTTPS setup, so I bake my certwrapper tool in to manage those; I can even set the build flags on certwrapper to only enable the particular DNS provider I personally need (thus avoiding dragging in clients for AWS, GCP, etc). Some software like Hashicorp Vault has an optional web interface that I don’t need, so I simply don’t enable it in the build. These changes save build time, reduce image sizes, in some cases improve runtime performance, and generally reduce the attack surface of what’s running in the container.

It’s also been a great way to learn more about how software is distributed. Writing a Dockerfile is not that distant from writing a PKGBUILD file for an Arch Linux package, or the equivalent for other distributions. In a couple of instances I’ve googled how to solve a particular issue, and found an Arch or Void linux maintainer asking the upstream project about the exact same issue.

Finally, all the images I build I push to my own registry so there are obviously no rate limiting issues. Standing up a service (assuming the Dockerfile has been written!) is amazingly quick because the base layers are all shared and cached, and the registry is a lot physically closer than Docker Hub. Bootstrapping this whole thing becomes an interesting problem because the image for the registry is stored on the registry, but I’ll leave that discussion for another post…