Chameth.com - posts like building-a-new-computer, curse-of-knowledge-blogging, docker-automatic-nginx-proxy but not why-you-should-be-using-https

Monthly Meanderings: January 2026

2026-02-01T00:00:00Z

Welcome to the second edition of my monthly meanderings. For a bit of context, you can check out the introduction to the first edition.

Website updates

It’s been a pretty busy month for chameth.com. Three blog posts: The Meaning of Life — an entry into the IndieWeb carnival where I mostly review a book on Stoicism — Surge Protectors: Marketing vs Reality which is a dump of a research rabbit hole I fell into, and An Interesting Tailscale + Docker Gotcha which documents a fun problem I encountered.

I’ve also made a new films section, which is basically my Letterboxd data but free range instead of cooped up in a silo. I imported my 200-odd reviews, and for the last few I wrote the review on my site and then copied it over to Letterboxd. That’s what the IndieWeb folks call POSSE: publish on your own site, syndicate elsewhere. I like the idea that my website is the canonical source of truth for all the public things I generate. I want to expand this to some other areas in the future: music, video games, board games, etc.

I made most of the film components into “shortcodes”, so I can drop them into arbitrary pages or posts, like so:

Watched films ranked

Every film I’ve watched since I started logging, ranked.

Obviously super subjective, and subject to change often and arbitrarily.

264 films

Finally, I added a new widget to the bottom of most pages: a “nod” button. It’s effectively a “like” or “kudos” button but deliberately does not track how many times it’s been pressed, has no social network connotations, and won’t flood my inbox or hit rate limits if it gets spammed. If you click the button, it simply sends a message to a private IRC channel that says “Someone nodded at $URL”. I’ll probably write a bit more about it in a blog post in the future.

Other projects

I only have one small non-chameth.com update: a new project called pigeonhole which provides a really basic web service that lets you leave messages in a named cubby, and retrieve them at a later date. I’m using it to automate adding things to my Obsidian notes from my Apple Watch. There’s lots of reasons why that isn’t as simple as it sounds. I went through a bunch of iterations to try and make it work before just writing code to fix it.

I wanted to do this because I’m trying to replace Todoist with just having tasks in Obsidian. I already used Obsidian for longer form notes, but I’ve now also started using it for drafting blog posts (I’m typing this in Obsidian right now!), and trying to keep more useful day-to-day notes. I’ll probably write a blog post with more details once I’ve figured everything out.

Finally, I’ve been moving a bunch of projects to a private Forgejo instance, with the ultimate goal of having all of my projects live there. I’m going to mirror the contents out to GitHub and maybe other places, but Forgejo will be the single source of truth, and where all the workflows/dependency wrangling/etc happens. I’ve got Renovate configured to do dependency bumps, and I’m very much liking the whole setup so far. I’m saying it a lot but again: I’ll blog about it in more detail when it’s a bit further along.

Entertainment

I mentioned last month that I was playing Hogwarts: Legacy. I finished that off, and have been struggling to find something to scratch the same itch. I’ve tried a whole bunch of open world games, and basically none of them work for me. They have cumbersome control schemes (yay console ports), really awkward or sluggish movement, and so on. I think I’m just too fussy, but if I’m going to sink dozens of hours into a game it shouldn’t feel annoying or like a chore!

I did play through Thank Goodness You’re Here, which is delightfully funny but sadly only took 3.6 hours to finish with 100% of the achievements. Still highly recommend picking it up, especially when it’s on sale for under ‘10 bob’. I’ve also started playing through Control, and I’m enjoying the ambience. There’s an insanely sharp difficulty spike for the first boss, though, which nearly made me put it down.

In other entertainment, I’ve been playing a load of turn-based games on Board Game Arena , and I’ve watched a bunch of films after barely watching any last month. Here’s another of those shortcodes to show them off:

Around the web

Remotely unlocking an encrypted hard disk

A fun post documenting using Tailscale in a very weird way to solve a relatable problem. Very much my cup of tea.

I charged $18,000 for a static HTML page

This one’s actually from 2019, but it’s the first time I’ve come across it, and it’s a fun story. As a contractor, deciding what to bill for and what not to can be a bit messy. Downtime between meetings? The ten minutes in the shower you spent thinking through a bug? It’s a lot more clear cut if the client wants you to sit in an office, twiddling your thumbs, though.

Oxide RFD: Using LLMs at Oxide

A wonderfully well thought out piece about using LLMs in a respectful, sensible manner. I’d been thinking about writing something similar, but it wouldn’t have been anywhere near as well crafted as this. While I basically agree with it all, the part about LLM-generated text really resonates:

LLM-generated prose undermines a social contract of sorts: absent LLMs, it is presumed that of the reader and the writer, it is the writer that has undertaken the greater intellectual exertion.

Your app subscription is now my weekend project

Roberto points out that monthly SaaS subscriptions start looking even less appealing when you can just prompt an alternative into existence. I talked a bit about using LLMs for one-person software before, and it becomes even more appealing when the alternative is paying monthly for a service that keeps shoe-horning in features you don’t want, making you agree to share data with 329 “trusted partners”, and/or repeatedly ratcheting up the price.

Ekul’s Internet Space

I love the aesthetics of this personal site, and the data tracking that goes along with it. I’m also slightly aghast at the amount of Monster consumed! Makes me want to track more things and expose them on my own site.

An interesting Tailscale + Docker gotcha

2026-01-29T00:00:00Z

As I’ve written about before, I use Tailscale for a lot of things. I thought I had it set up in a reasonably secure manner, but I recently noticed a problem.

I use Tailscale’s ACLs to limit what each node can access, based on the tags I apply to it. So an app node can’t access anything via Tailscale, while an integration or server node can access things tagged with either app or integration. This is expressed pretty simply in the Tailscale ACL JSON:

{
	"tagOwners": {
		// Servers that can be SSH'd into
		"tag:server": [],
		// Applications that are exposed on tailscale but never connect out
		"tag:app": [],
		// Things which talk to other services over tailscale (connecting to apps etc)
		"tag:integration": [],
	},
	"grants": [
		{
			// Users can access everything
			"src": ["autogroup:member"],
			"dst": ["*"],
			"ip":  ["*"],
		},
		{
			// Servers and integrations can access integrations and apps
			"src": ["tag:server", "tag:integration"],
			"dst": ["tag:integration", "tag:app"],
			"ip":  ["*"],
		},
	],
}

Over the past week I’ve been setting up a private Forgejo instance behind Tailscale, complete with an actions runner that runs things using a docker-in-docker container. I didn’t want the runner knowing anything about Tailscale, so I had it configured to speak to Forgejo direct over HTTP (forgejo:3000) instead of using full Tailscale HTTPS URL that I use when accessing it (http://git.example-net.ts.net/)¹.

Everything was going fine, until I forgot to do that translation… and it worked. My Forgejo action runners could access anything on my tailnet. I run several things on Tailscale that just have authentication turned off, on the basis that only authorised devices can access them. Things like the admin interface for this website. I definitely didn’t intend for any workflow I run on my git server to have access to edit my website!

This wasn’t just limited to Forgejo, either. Any docker container I was running could access the tailnet. In hindsight it’s fairly obvious why: the host is running Tailscale, connected as a node tagged with my server tag. That creates a tailscale0 interface, and automagically sets up iptables rules to route Tailscale traffic over the interface. Docker also automagically sets up iptables rules to bridge traffic, and apparently these two sets of rules interact in such a way that traffic from Docker containers is allowed to route via the tailscale0 interface.

I say it’s fairly obvious in hindsight — there’s no reason why Docker would special case any particular host interface after all — but it still feels pretty surprising. Because both bits of software inject their own iptables rules, I never really had a good mental model for how they interact. The host Tailscale node was a completely separate building block to Docker. It would be a pain to use either of them if they didn’t do these rules, but it’s also one of the reasons I don’t really like “magical” things².

There are lots of ways to fix this, but none of them feel particularly great. You can configure both Tailscale and Docker to not automatically fiddle with iptables and handle the rules yourself, but I really hate dealing with iptables³. As a stopgap I did hold my nose and add some iptables rules to drop traffic to the tailscale0 interface if it originated from the IP ranges that Docker was configured to use:

iptables -I DOCKER-USER -s 192.168.0.0/16 -o tailscale0 -j DROP
iptables -I DOCKER-USER -s 172.17.0.0/12 -o tailscale0 -j DROP

The DOCKER-USER chain is a nice little escape hatch; it comes before the main auto-generated DOCKER chain, and Docker leaves the rules in it alone.

So I added these rules, and felt pretty good about myself, and then… everything started breaking in weird ways. After some debugging I realised the problem was DNS⁴. The server’s DNS resolver is 100.100.100.100, a special Tailscale address. This is so that it can resolve tailnet hostnames via MagicDNS (and so I don’t have to configure my custom DNS servers manually on each device; Tailscale does it for me). My new iptables rules inadvertently dropped all the DNS packets coming from docker containers. D’oh.

Obviously the solution here is to double down and add MORE iptables rules:

iptables -I DOCKER-USER -s 192.168.0.0/16 -d 100.100.100.100 -o tailscale0 -j ACCEPT
iptables -I DOCKER-USER -s 172.17.0.0/12 -d 100.100.100.100 -o tailscale0 -j ACCEPT

This got DNS working again, but it all feels a bit gross. Not least because to actually make these persist you need to use iptables-save, and then you also get all the rules that both Docker and Tailscale have inserted. I came across a script to filter out the Docker ones, but… yuck⁵.

I realised a cleaner idea might just be to lock down what server tagged nodes could access within Tailscale itself. That way I can avoid touching iptables at all. It’s handy to be able to curl services from the host when debugging, but it’s not really necessary. So I removed that access, and… stuff broke again. I’m using my Forgejo instance as a registry for some of the docker images I run, so the docker daemon needs to be able to reach it. I ended up making a new tag for infrastructure, which can be accessed from server devices. This does still allow all the docker containers to reach Forgejo, but I already have it set up with appropriate access controls and public/private repository splits. Forgejo is a service designed to run publicly, so this seems a reasonable trade-off for convenience. I used the tests feature of Tailscale’s ACL config to make sure I’d got the rules right:

{
	"tests": [
		{
			// Servers can only access infrastructure
			"src":   "tag:server",
			"proto": "tcp",
			"allow": [
				"tag:infrastructure:8080",
			],
			"deny": [
				"100.84.16.43:8080",
				"me@example.com:8080",
				"tag:server:8080",
				"tag:app:8080",
				"tag:integration:8080",
			],
		},
	],
}

The whole situation still feels a bit messy. If I ever get around to switching to nftables I might loop back and manually craft some rules for routing traffic, instead of leaving Tailscale and Docker to do their own thing.

I discovered later on that logging into the container registry at forgejo:3000 actually issued a redirect to https://git.example-net.ts.net/ so this was all basically for naught… ↩︎
I didn’t use Tailscale’s MagicDNS for a long time just because the word “magic” put me off. Only when I eventually got around to learning how it worked, and seeing that it wasn’t really that magical under the hood, did I change my mind. ↩︎
nftables seems far better in lots of ways, but I can’t really be bothered migrating. Maybe next time I reimage the server for whatever reason… ↩︎
It’s always DNS… ↩︎
Again, nftables would almost certainly help here. It actually has (gasp) configuration files. But again, I really didn’t want to spend the time migrating. ↩︎

Monthly Meanderings: December 2025

2026-01-01T00:00:00Z

For a while I’ve been idly thinking about a way to get smaller bits of content onto my website without it being too annoying for me, or too hard to consume. Things like interesting links, small project updates, and so on.

I didn’t immediately come up with anything I was happy with, so just sat on it. Ignoring the problem seems to work surprisingly well for things like this. I’d been meaning to redesign the about page for a while, but wasn’t sure what to do with all the interests I wanted to list. After ignoring the problem for a while I came across the interests directory and realised I could just bundle all those things into their own page.

This seems amazingly obvious in hindsight, but I think I needed a bit of a push to accept that a page just about my interests was… well… interesting. Anyway, as the end of December rolled around, I got a similar dose of inspiration: a flurry of monthly round-up posts from various blogs I follow. If I bundle up all the small bits and bobs, it’ll make something vaguely blog post shaped, and writing and consuming those is already a solved problem. Again, pretty obvious in hindsight, and again I think I just needed a nudge to shut up the little voice in my head saying “but those people all have interesting things to say… do you, really?”

So without further ado, welcome to the inaugural post in my new monthly meanderings series. If you have any feedback on the format or contents, please drop me a note with the contact form at the bottom!

Website updates

As already mentioned, I reworked the about page and split out a new interests page. The old about page had a few lists of interests show up in thought bubbles when you hovered over things, which was a cool effect on desktop, but barely worked at all on mobile. The new page gives me a lot more room for waffle, and I do like waffling.

Only a single new blog post this month: exposing game servers over Tailscale. Just a quick how-to I wrote up, having not found it documented usefully anywhere before. I have a bunch of ideas for posts I want to write, but none of them have really sparked joy quite yet, so I’m once again employing the “sit on them for a bit and maybe inspiration will strike” approach.

Other projects

I created a small collection of Docker related projects this month: containuum is a go library that helps with listing containers, and keeping that list up-to-date. On top of that I built centauri-docker-confd which generates a config for centauri (my reverse proxy) based on running Docker containers. I already had a way of doing that, but containuum is designed to be a bit more robust, and I made it so the config can be passed over a network connection instead of having to write it to disk and then signal the proxy to reload.

The next project has a bit of backstory: after reading I got hacked, my server started mining Monero this morning [warning: the article is interesting but a bit LLM-sloppy] I realised that I, too, was running a vulnerable version of Umami. Luckily, as far as I can tell, it wasn’t exploited. But it got me looking into automated vulnerability scanning. I don’t put much stock into it normally, as you get so many false alerts, but this is one case where it would have definitely helped. There didn’t seem to be any good solution for my “middle-of-the-road” approach to containers (lots of containers, but not needing Kubernetes), so I wrote purser. It takes every image used by a running container, runs them through Trivy, and generates a combined report. I’ll add some form of active notifications to it in the future.

Entertainment

This month I’ve been playing a lot of Hogwarts: Legacy, after picking it up for free on Epic Games. I grew up with the Harry Potter books coming out, and while I’m not a super-fan, it still has a special appeal to me. Obviously she-who-must-not-be-named is doing her best to out-evil Voldemort, but I think you can still enjoy the universe despite that. Especially when you don’t have to contribute any money that might go towards her.

Anyway, the game is surprisingly fun. They did a really good job of making it feel like an open world. You want to walk around from place to place to see everything, find all the various collectables, and so on. Compared to Far Cry or Cyberpunk the world is a lot smaller but that means it’s far more densely packed with stuff to do. I initially didn’t vibe with the way combat works: it’s pretty heavily reliant on dodging or shielding against incoming attacks, which reminded me a lot of Clair Obscur: Expedition 33. Fortunately, it’s a lot more forgiving in Hogwarts: Legacy and I got used to it after not too long.

It’s been a relatively sedate month for other forms of entertainment. I saw Fackham Hall and Wicked: For Good at the cinema. The former was a funny romp, vaguely reminiscent of Airplane or The Naked Gun, as you’d expect from something penned by Jimmy Carr. Wicked was… fine? I wasn’t overly enamoured with part one, so it’s not a surprise I didn’t vibe with the follow-up. If you smushed them into a single normal-length feature I think they would have made a really good film, but two films both over two hours long is a bit much for what actually happens.

Around the web

Wikipedia: List of citogenesis incidents

A list of incidents where (often false) information on Wikipedia has ended up becoming its own source. That led to Mark Dominus’ blog post titled Imaginary Albanian eggplant festivals… IN SPACE where he discovers that a mountain on Ceres got named after a made-up festival (and then got it fixed!)

Not relying on Wikipedia as a source was drummed into us at school, but it feels like this sort of thing is only going to get worse and worse now LLMs are on the scene. I assume we’re already at the point where LLM hallucinations are prevalent enough that they’ll find their way into the training data for future iterations.

Simon Collison’s website

I really like the design here. Both the homepage and how well every journal entry is formatted. It makes me feel bad for the many walls of text that adorn this site. The archived v4 design is also wonderful.

My Dinner with Skinner

A 43-minute-long feature film that is “just” the Steamed Hams gag from The Simpsons done in the style of My Dinner with Andre. There’s a (much shorter) behind-the-scenes video that goes over the extreme amount of effort that was put into it, too.

I’m still trying to wrap my head around this. It’s… something.

Delete Spotify? Sure, But Don’t Just Replace it With Another Subscription

A similar take to my own escaping Spotify the hard way, but it avoids getting lost in the technical weeds like I did. (In my defence, they’re very fun weeds to get lost in.) Stephanie is also one of the people that does monthly wrap-ups, and I was pleasantly surprised when the latest one popped up in my RSS reader and I saw my own site linked.

Blogging and the Imaginary Quality Bar

2025-09-18T00:00:00Z

Recently I realised that I’ve developed a self-imposed quality bar for blog posts. They need to be a certain length, and have a certain substance to them. They need to be generally useful in some way I can’t quite define, to some imagined future audience. They need to have images to break up the page, and opengraph data for when they’re linked to on social media. But… maybe they don’t? Those things all make sense for longer “article” type posts, but not so much for a personal blog.

I’ve done some fiddling so that I can make posts without all that extra stuff. We’ll see how it goes. The posts won’t be distinguished on the site (yet?), but I have set up separate RSS feeds for just short form posts and long form posts in case subscribers are radically opposed to one or the other. Now I can start blogging like it’s 2005 again. But hopefully with a bit less cringe.

I’ve been staring at this post in my editor for about five minutes. The urge to make it longer, more thorough, more article-like is really strong. This entire paragraph is only here as a compromise with myself so I can actually save and commit the post.

Fixing a loud PSU fan without dying

2025-07-30T00:00:00Z

Three months after I built my new computer, it started annoying me. There would occasionally be a noise that sounded like a fan was catching on a cable, but there weren’t any loose cables to be a problem. Over the course of a few weeks, the sound got progressively worse to the extent that I didn’t want to use the computer without headphones on. I measured the sound at 63 dB, which is about the sound of someone talking. That may not sound terrible, but it’s a constant, nasty noise coming from something that sits about 40cm from my head.

After some investigating¹, I identified the PSU fan as the culprit. I have a Cooler Master V750 SFX, which is not super high-end, but wasn’t cheap, either. It shouldn’t be developing issues after three months. Thankfully, it comes with a ten-year warranty, so it should be easy to get sorted, right?

Warranty woes

I looked at Cooler Master’s warranty, and for issues within the first two years you have to deal with the retailer. That would be Amazon in my case. So I looked at Amazon’s information on warranty issues. Their policy is that if it’s more than 30 days since purchase, you have to send it off to a third-party repair center and wait for them to diagnose and try to repair it. Here’s the kicker:

Usually repairs take up to 20 business days (including delivery time), but could take slightly longer

I use the computer for work, have upcoming LAN parties to go to, and generally can’t do without it for an entire month. That’s assuming they reproduce the issue: the PSU fan only turns on when it reaches a certain temperature, so if you just plug it in briefly it won’t exhibit any symptoms.

If I was going to do a warranty return, I’d need to buy a new PSU first to use while this one was away. If I’m spending £100+ on a PSU, then I’d be getting a better one that doesn’t have known issues with the fans. So when the Cooler Master eventually got returned I’d have no use for it. What a waste.

So the warranty is about as much use as a chocolate teapot. Good to know, I guess. If I wanted decent service, I should have probably used a real retailer, not Amazon. Lesson learnt.

Doing some research

If the warranty is useless to me, maybe I should just void it and try to fix it myself. I did some research online. Most of the results went like this:

if you’re not a trained professional you should not be opening up your PSU at all. There’s a lot of current that goes through it which will seriously hurt/main/kill you

it’s time consuming and potentially dangerous

or some other variety of doom and gloom. There were some actually useful results sprinkled in, though. A post on the smallformfactor.net forums details someone swapping out the fan on the 850W version of the same power supply because it was too noisy. It looks like the fan connector in the PSU is a two-pin connector, and they just used an off-the-shelf adapter to convert the standard four-pin case fan connector. It sounded a bit annoying to make it all fit, though.

A similar post on reddit showed basically the same upgrade, but identified the connector as a 2.54mm JST-XH. They crimped their own connector on, which feels a lot better than using a bulky connector. I do have a crimping set for JST connectors, but I absolutely hate doing them because they’re so fiddly and annoying. I’m not sure if I trust one of my crimps inside a power supply, either.

Looking at the pictures in those posts, I identified the fan as an Ong Hua HA9215VH12FD-F00. I searched to see if I could see any specifications for it. I couldn’t. But what I did get back as my first result was another Reddit post, this one titled “Getting rid of a HA9215SH12FD-F00 fan from your PSU”. It says something about the quality of a component when the first result is a post about getting rid of it because it’s annoying².

All of these mods seemed easy enough, and I’m reasonably confident in my ability to both discharge and avoid touching capacitors, so I probably wouldn’t die. I ordered a Noctua NF-A9x14 fan and some pre-made JST-XH connectors and waited for them to arrive.

Upgrade time

The replacement parts arrived one evening, so when I turned the computer off for the night I unplugged it from the mains, held the power button down for a while, and left it overnight for good measure. The next morning I popped open the case, disconnected and removed the PSU, gleefully tore the “warranty void if removed” sticker off, and opened it up.

Removing the fan was simple: unplug the JST connector and undo the screws holding it to the outer panel. I confirmed that my JST connectors were the right size, then started surgery on the Noctua fan. I carefully removed the heatshrink, cut off the normal fan connector, and separated out the four wires. A quick check of their FAQ confirmed the wiring colours: black was ground, yellow +12V, and blue and green used for speed control (which we’re not using in this instance). I clipped the blue and green wires off near the hub so they wouldn’t be in the way, then cut the yellow and black wires down to length, and attached the JST connector with a solder seal:

Old fan, new fan, burnt mouse mat

In the process I discovered my mouse mat doesn’t like being hit with a heat gun. Whoops. The solder seals are great: the solder in the center melts to form an electrical connection, the parts at the end grip the cable to provide mechanical strength, and the whole thing acts like heatshrink and keeps the connection insulated. A lot less fiddly than crimping JST connectors, and a lot smaller and cheaper than an adapter.

I installed the fan and reassembled the PSU. Then undid it all and tried again, as apparently the face the fan mounts to isn’t quite symmetrical and I’d installed the fan upside down. Connected everything back up, plugged the computer in, booted it up, and… nothing. The PSU doesn’t actually power the fan until it hits a certain temperature. I figured putting it under load would probably heat it up, so ran a graphics benchmark a few times. Eventually the fan spun up. Huzzah.

Soon the entire computer will be beige and brown

Peace at last

I measured the sound of the new fan: 43 dB. That’s a decrease of 20 dB. Due to the weird logarithmic properties of the dB scale that no one understands, that means it sounds about 4 times quieter to human ears. Big improvement!

It’s worth pointing out this isn’t a straight one-to-one upgrade. I don’t know the specs of the old fan in terms of airflow, and I’m just assuming that the Noctua will be good enough by virtue of being a decent fan. They also behave slightly differently as the power ramps up: the stock fan starts spinning at a lower voltage than the Noctua, which needs around 7V to get started properly³. I don’t think this will be an issue, as it’s effectively just putting a small step at the lower end of the fan curve. It might shorten the overall lifespan of the PSU, but from my point of view it failed after four months, so any extra time is a bonus.

I recorded some before/after audio, so you can hear the difference. I think there’s some amount of volume normalisation going on, so it’s not quite as stark a difference as in person, but it’s still noticeable.

Audio sample from the old fan

Audio sample from the new fan

And if you couldn’t hear it, here’s a visual representation:

Side-by-side comparison of the audio clips

The whole upgrade took about an hour (less time than writing this post about it!), and I even managed to avoid killing myself.

Opening the case and sticking my ear near to various components. High-tech stuff. ↩︎
On closer inspection it’s actually a slightly different model — there’s an S not a V in the middle there — but I’m going to assume that doesn’t change much on the quality/noise front. ↩︎
It then keeps spinning down to about 5V or so, it just needs enough power to initially get started. ↩︎