Chameth.com - posts like building-a-new-computer, securing-all-the-things-with-1password, sense-api, why-you-should-be-using-https

Securing all the things with 1Password

2025-11-26T00:00:00Z

For many years I’ve been a keen user of Bitwarden. Recently I’ve had a lot of small paper-cut problems. The browser extension was redesigned and just doesn’t quite work how I expect any more. The prompt to save new login info misfired more than it worked. The mobile app stopped background refreshing properly. No one issue was enough to make me want to leave Bitwarden, but it definitely wasn’t sparking joy. Then there were rumblings about a price increase. I don’t think they’ve announced anything, but the numbers I saw were a jump from $10/year to $24/year. A nearly 2.5x price increase for a tool that was actively getting worse over time did not seem like a good deal to me¹.

I spent a while looking at alternatives, but there were very few that met my needs. Nordpass is highly praised but doesn’t support saving TOTP codes on personal plans². All the nice open-source/self-hosted solutions fall down when you want reliable synchronisation to an iOS device (which is fair enough). Proton Pass looked like it had all the features, but the pricing was asinine. Different pages showed different prices, the prices were introductory rates that jumped up on renewal, but that was hidden away in small print, etc. Yuck. The prices are also pretty high. More or less the same as 1Password, which I’d been discounting due to the cost, until now…

After eliminating basically every other option, I took a serious look at 1Password. It seemed to tick all the right boxes, I’d often heard good things about it, and it wouldn’t actually be much more expensive than Bitwarden if they went ahead with the rumoured price increase. I started a trial to give it a test.

Initial impressions

1Password is — as you’d expect for something that originated as a Mac app — very pretty. But it’s also highly functional. The looks don’t get in the way, they’re nice extras on top. When it’s locked, you get a large version of the 1Password logo, which is a front-on view of the barrel of a lock, next to the password input. When you authenticate, the barrel turns as though you’d put a key in and rotated it, and then the background splits in two and opens like a vault door. Does a password manager need to do that? No. Does it make me a little bit happy every time I see it? Yes. Look at it, it’s amazing!

The design philosophy carries through the rest of the app. Despite using Bitwarden daily, I often clicked on the wrong thing when I wanted to do anything other than autofill; in about a month of using 1Password I don’t think I’ve ever misclicked or been confused about the UI. The browser extension just feels snappier than Bitwarden, too. I’m not sure if it’s actually faster or if the design just makes it feel that way.

Functionality-wise, 1Password does everything Bitwarden did for me but slightly better. Bitwarden kicked you to its web interface for some operations (like checking compromised passwords); 1Password has that all built into the app. Instead of editing entries in a fiddly little browser popup, 1Password just summons forth the desktop app and you edit it there. It does a good job of detecting QR codes for TOTPs and offering to save them. I think the only small complaint I have is that the browser extension doesn’t have an autofill keybind. You can rig that up via the desktop app, but it feels like 1Password leans towards you using the UI it adds on login forms. To be fair, that UI works really well, and is very useful when you have multiple accounts on a site. My muscle memory for autofilling is strong, though.

Diving deeper

At this point I’d decided to switch fully to 1Password, so I started digging into what else it could do. The “Watchtower” feature combines a bunch of reporting about passwords (weak, breached, reused, and so on), but also lists sites where 1Password knows you can use passkeys or 2FA and don’t have them set up. I’d previously disabled passkey support in Bitwarden because it just appeared one day and got in the way of me trying to use a YubiKey, but decided to give them a go with 1Password. “Passkeys” is basically just a marketing term for FIDO2’s WebAuthn with automatic discovery bolted on top. The big problem is how you synchronise or export them. It’s all well and good letting your iPhone create a passkey when the Amazon app arbitrarily prompts it to, but what happens when you log in on a different device, or swap to Android, or whatever? Having 1Password deal with them fixes that³.

The passkey flow is very smooth: 1Password pops up an account selector, with obvious options to create a new account or pass the request through to another device like a YubiKey. It’s smart enough to guess the right account most times, even when you’ve got 17 different Google accounts for $reasons. Using them is equally simple: it just shows a popup and you tap to confirm you want to use the passkey. The Watchtower functionality made it really easy to go through and add passkeys everywhere that supports them. The thing I really appreciate is that they make the data that powers it public. It’s obviously partially a marketing thing for them, but it’s also a useful resource they could have kept proprietary.

Passkeys are a bit basic, though. 1Password has many more fun offerings. There’s an entire developer section with various goodies. At first I thought “that’s nice but I won’t use it”, but now I’m using basically everything it offers. The first thing to draw me in was the CLI. It’s pretty straightforward, but like the browser extensions it can nicely integrate with the desktop app so you unlock them all at once, deal with auth prompts in the GUI, and so forth. I have a couple of command-line tools that need passwords (e.g. for dealing with encrypted backups); now instead of prompting for the passwords, they shell out to op read and I authorise it via a popup in the 1Password app. Simple, but a nice quality of life improvement.

Next up there’s a beta feature called “Environments”. This lets you define groups of environment variables within 1Password, and have them exported automatically to certain destinations. At the minute it supports exporting to the AWS SecretsManager, and local .env files. When making a local file it actually makes a named pipe, so the credentials aren’t just sitting on disk (and won’t end up accidentally committed to anything). When the 1Password vault is locked, anything trying to read from the file will cause an authentication popup, much like with the CLI tool. I used to have the mentality that if something could read arbitrary files on disk, it was basically “game over” from a security point of view. Recent events made me realise there’s some value in defence-in-depth there, though, and 1Password provides a nice solution.

Fingerprints + Linux = Sadness

One feature of 1Password had me feeling a bit left out. Instead of entering your vault password to unlock it every time, you can have it invoke the system authentication library. On an iPhone this uses Face ID, on a Mac it can invoke Touch ID, and on Linux it uses Polkit. In the default configuration, Polkit just asks for your local user password, which is not much of an improvement. A fingerprint scanner seemed like the obvious solution here: it’s both a lot more convenient than typing a long password, and provides some assurance that it’s actually me doing the action⁴. Unfortunately, fingerprint readers on Linux seem to be a bit of a sorry affair.

Don’t get me wrong: there’s support. libfprint has a big list of supported devices, but I found it almost impossible to actually find a device I could buy that had one of the listed sensors. Most of them seem to be exclusively built into laptops. A lot of the cheaper devices just use whatever sensor they can get their hands on, so it’s pot luck if you receive a version that will work with libfprint or one that won’t. There’s also not a lot of information beyond that published by libfprint. I guess it makes sense: external fingerprint readers just aren’t a thing most people care about. While that makes me feel all special, it’s somewhat prohibitive to getting an actual working solution.

I’d given up on finding an answer to this when I stumbled upon an article by Scott Laird. He uses a YubiKey Bio to do it, via pam_u2f. The Bio isn’t actually a fingerprint reader: it just has an on-board reader to secure the credentials. The OS doesn’t get involved in the process. But because it can provide a fingerprint-secured U2F key, and pam_u2f can require that key to perform system operations, you basically get the same result. Maybe it’s actually even better than using a “real” fingerprint reader, as the data is secured on the hardware device…

The YubiKey Bio was a bit more pricey than I really wanted, coming in at around £90, but it felt like a worthy investment to add a bit of security and avoid typing a password dozens of times a day. The setup was simple: the official app that you use to enrol fingerprints is packaged in the Arch User Repository, and it worked perfectly. I already had pam_u2f set up as I used a (non-Bio) YubiKey to gate access to sudo, so I just generated a new key on the Bio, updated my config to use that, and added it to the Polkit policy. Now when I need to unlock 1Password or authenticate something, it prompts me to scan my fingerprint. Perfect!

Biometric all the things \o/

One of the other things Scott mentioned in that article was SSH keys. I’d seen 1Password supports acting as an SSH agent, but didn’t really see why I’d want it to. I used a resident key on my old YubiKey, so I didn’t have much to gain from a security point of view. Scott’s article made me realise I could have some big convenience gains, though. Currently every time I need to use the key, I enter a PIN and then physically touch it. I don’t mind this for the most part, but it turns out git-lfs does something like four different requests every time you do a git operation, none of which reuse the same SSH connection for some reason. That gets painful when each request involves a PIN and a touch. I also liked the idea of using pam_rssh for sudo authentication, but didn’t want to have to do the PIN-and-touch dance every time I used it.

You can probably see where this is going: I generated an SSH key in 1Password, and then… spent literal hours disabling all the other SSH agents that were running on my system, and trying to figure out where SSH_AUTH_SOCK was being populated. I didn’t manage to figure that out in the end⁵, and ended up just overriding it to point at 1Password’s agent socket. I added the new key to GitHub, and did the usual ssh git@github.com test, and it worked perfectly. 1Password prompts to allow access to the key, showing the process requesting access, and authorising it requires a fingerprint read:

can haz ssh key?

I’m not sure why Kitty doesn’t get an icon in the prompt; other applications do. You can expand the details section to see the key fingerprint being requested, as well as the exact process name and PID requesting the key. With the proof of concept done, I generated a couple more keys: one for normal SSH, and one for gaining root access using pam_rssh. Using different keys ensures I get prompted for them separately, and means a malicious app couldn’t sneakily ask for a Git key but actually pivot to SSH into a server. Not sure that’s ever likely to be a problem, but it’s basically no additional work for a bit more defence-in-depth, so why not?

I also took a moment to configure pam_u2f for both lightdm and xfce4-screensaver, so I can now log in and unlock my PC with my fingerprint. It’s not quite as smooth as Touch ID on a Mac, but it’s pretty close.

As an aside: this is not the first time I’ve been in this situation. Both Spotify and Todoist have focused on features I don’t want or need (including, but not limited to, pretty much everything branded “AI”), and then hiked the price up afterwards. It’s not quite standard enshittification, but it’s clear that our incentives no longer align properly. ↩︎
Or didn’t, at the time I looked. It now says “All plans” on the website but the docs only exist for business accounts, and there doesn’t seem to be any announcement explaining the change. ↩︎
Having Bitwarden deal with them would also have fixed that, but it got in my way instead of helping me, so… ↩︎
or it’s not me, but I’ll be busy dealing with the presumably-undesired removal of one of my digits, so probably won’t care about whatever is happening on the computer. ↩︎
Although I’m pretty sure the answer starts and ends with “systemd, somehow”. ↩︎

10 Weeks with an Apple Watch 10

2025-09-09T00:00:00Z

My watch. Yes, I am available for wrist modelling opportunities.

Around ten weeks ago¹ I picked up an Apple Watch 10, and have been wearing it almost constantly since. It’s not my first Apple Watch — I had a Series 5 for a bit back in 2020 — but it’s the first time I’ve actually stuck with it. Ten weeks seems like an apt time to reflect on it.

Firstly, why did I even bother? Well, for a couple of years I’d been wearing a Xiaomi Smart Band 7, mainly to monitor my sleep stats and set alarms that won’t wake up everyone else nearby. Its battery life was fantastic — with notifications and other things turned off, I got about a month of use between charges — but actually using it felt like trying to order food via the medium of interpretive dance.

My biggest gripe was the screen lock. If I didn’t have the screen locked then I’d periodically trigger it during the night when I moved around and it came in contact with my chest or leg. With the lock enabled you had to deliberately swipe up from bottom to top to enable interaction, but it didn’t work reliably. When I wanted to adjust an alarm, I’d be stood swiping repeatedly trying to get it to respond. When you finally get it unlocked, the whole interface is just fiddly.

The other issue was the data quality. There were some nights when I’d been woken up, sometimes even getting up and moving around, and it just didn’t show it in the data. If it can’t even get whether I’m asleep right, can I trust anything else it says?

I spent a while researching the best devices for sleep tracking. The Oura ring came highly recommended, but it was expensive and required a subscription to do anything useful. No thanks! The Apple Watch was consistently rated pretty well, and I reasoned I could pick up a refurbished older unit. I’ve been using an iPhone as my daily driver for a while, so it’d fit right into my begrudged walled garden.

The Series 10 has a significant advantage, though: it charges much quicker than all the previous generations. On a 30-minute charge, the Series 10 can go from 0 to 60%; the 9 can only make it to 40%, and my old 5 a measly 30%. Shorter charge times means I’m far less likely to leave it on charge and wander off without it. In some ways the daily charging is more convenient than monthly: the wireless charger sits on my desk, and I plop the watch on it for a little while in the evening; I don’t need to dig out the weird pogo-pin connector that has vanished sometime in the last four weeks, then carefully arrange it so it stays attached.

How a watch maybe saved my life

One of the big features of the Apple Watch, like many other wearable devices, is health and fitness tracking. I didn’t think much about this, beyond the sleep data I wanted, at first. I’ve never had a particularly good relationship with exercise², but I do like some good statistics. I started going for walks more often to get more data and see the graphs of VO2 max and HR recovery gradually inch up. That wasn’t the most profound effect on my health, though…

The recent versions of the Apple Watch have a feature that monitors for sleep apnea, a disorder where you don’t breathe properly during your sleep. I knew I wasn’t sleeping great — that’s why I was paying attention to sleep tracking data — but was still a bit surprised to get a notification from Apple Health after wearing the watch for 30 days. It gives you a graph to print and take to your doctor. So I diligently booked an appointment and a few weeks later went to see my GP.

The appointment went about as you’d expect: talking about referral to a sleep centre for a study, and so on. Towards the end, the doctor took my blood pressure (sleep apnea can be caused by, and can cause high blood pressure, in a lovely little vicious cycle). I don’t think either of us expected anything; it was just one of those standard checks for a related problem. After taking the reading, the doctor looked at me and said, “I can’t let you leave with a BP like this”. Yikes!

Blood pressure readings are split into stages: normal is under 120 mmHg³ over 80 mmHg⁴, stage 1 is up to 140/90, stage 2 is up to 180/120, and above is simply called “crisis”. Guess where I was? Also, fun fact: depending on how exactly you count and attribute things, hypertension comes out as the single largest cause of death in humans. It doesn’t kill you outright, but contributes to strokes, coronary artery disease, heart failure, and lots of other lovely things you don’t want on your CV.

After doing a few more readings, it settled down to just under the “crisis” stage and into the “holy crap, start treatment immediately” stage instead. I won’t labour on much more about this, but things are definitely moving in the right direction now⁵.

While the Apple Watch didn’t literally save my life, it triggered the chain of events that led to this diagnosis and treatment. Who knows what would have happened had it remained undetected? Probably nothing good. Also, go check your blood pressure! It’s simple to do and simple to treat if there is an issue, but so many people are walking around with hypertension and not even realising.

Building gates in the walled garden

Even though the watch is arguably a life-saver, not everything is rosy. It’s an Apple product, so you’re firmly locked in a walled garden, jealously guarded by people wearing black turtlenecks. Fortunately, there are a few ways to make it less painful.

All the health and fitness data is stored in Apple Health. You can export data as a big messy file, but it’s a very manual process to do so and the data format is gnarly. Luckily, there’s an app for that! Health Auto Export can, well, automatically export health data. It does what it says on the tin. It can send the data to Home Assistant, over MQTT, or dump it in some cloud file services, but I just have it post it all to a REST endpoint on a service I wrote. Then I dump it all in a database and can do whatever I want with it!⁶

Another tool that’s more useful on the watch itself is Apple Shortcuts. This is their no-code “if-this-then-that”-type thing. You can make automations or shortcuts that run a number of tasks. I have a whole slew of them I access via a complication⁷ on my watch face: one which prompts for input and adds an item to my to-do list (swiping to write letters is surprisingly not horrible), one which lets me select from a bunch of pre-written ones (“charge kindle”, “take laundry out in 1 hour”, type things), one to log my weight into Apple Health, one which can open and close the blinds in my room, and so on. It’s a surprisingly robust and easy-to-use system and offers just enough freedom that I’m not constantly grating on the edge of the walled garden.

Shortcuts being able to initiate arbitrary web requests is the real killer feature for me. Anything I can’t do on the watch itself, I can just farm off to a web server and connect it up with a shortcut. No need to learn Swift or pay Apple for the privilege of being a developer! For a lot of things, like controlling the blinds or adding to-do items, I already had a HTTP endpoint available and exposed over Tailscale⁸. Adding it to the watch was just a case of entering the right things in the Shortcuts app.

Daily nitty-gritty

There are lots of other little bits and pieces that come up when using the watch daily. I don’t think I can bundle them up into a pleasing narrative arc, so instead please enjoy some disjointed paragraphs of observations.

The Apple Watch has a lot of nagging abilities. It can notify you about your fitness “rings”, prompt you to stand up every hour, count how many seconds you wash your hands for, etc. I think I’d dislike these just on general principle, but the way it does them is so condescending it’s painful. I think there’s probably a cultural divide issue here, but there is no way in British English to say “Great job! You washed your hands for 30 seconds!” without it sounding like you’re being amazingly sarcastic or like you’re talking to a young child. So I turned all of that nonsense off. It’s meant to be a tool not a wannabe life coach.

You can access Maps directly on the watch and even do navigation. It works really well. The navigation mode has some nice haptic feedback: it does a short pulse as you’re approaching a turn, and then a long pulse at the actual turn. I like it a lot more than having to dig out my phone or have the directions read out. You get one pulse, glance down and see where you need to go, then it reminds you a little later when it’s time to do it. It’s a delightful user experience.

Watchfaces aren’t quite so delightful. There’s a limited number of built-in ones, and some are “exclusive” to the Ultra Series, and you can’t use them on a peasant watch like a Series 10. Annoyingly, there’s not one that does exactly what I want: a plain analogue clock with an inset date and four complication slots around the outside. Instead, I have to use one of the slots to show the date. There are third-party watchfaces, but they have issues. Firstly, there’s no actual API for making watchfaces⁹, so what they do is bodge it horribly by using a photo background that has fake widgets on it. On top of that they’re almost universally subscription-based. Again, no thanks¹⁰.

The issue I had with the Smart Band triggering when I was sleeping is solved trivially on an Apple Watch, by virtue of it having a physical button in the crown. When you put it in sleep mode, you have to double-press the crown to unlock it before it’ll do anything else. It hasn’t misfired once while I’ve been using it.

Sleep data; spot when I swapped devices!

Finally, a special mention for the gesture controls. If you raise the watch it reliably wakes up (switching from a low refresh rate, dimmed screen to an active, brighter one); you can then double-tap your index finger and thumb together and it will scroll down or page through whatever you’re looking at. The killer feature for this is navigating recipes: you can advance to the next step in a recipe while your hands are covered in flour. It’s also handy for reading notifications: when one pops up, you can double-tap to expand it, then, when it gets to the bottom, it’ll outline the default button (often “Dismiss”) and you can double-tap again to click it.

The verdict

I normally don’t like writing an actual labelled conclusion, but it feels like one is needed here! Overall, I’m happy with the watch. The daily charging doesn’t bother me, the data gathered seems reliable, the health monitoring has obviously paid dividends already, and the walled garden isn’t too chafing. It’s a straight upgrade over my old Smart Band, and I think it was worth the cost.

The original reason for getting the watch was better sleep tracking, though, so how well did it do? I’m much happier with the data: it seems to more accurately represent when I was awake in the night, and overall the sleep phases just seem to make more sense. You can see in the graph that the old data switched frequently between phases, and they didn’t quite line up for some reason; towards the right when the Apple Watch is supplying the data instead there’s a much more consistent pattern of sleep phases that repeat over the course of the night.

I’m not going to advocate that you go out and buy one, though. I know my requirements and usage aren’t typical, and I’ve also not got experience with any recent Android Wear alternatives or the new version of the Pebble watch that’s coming soon. You should definitely get your blood pressure checked, though!

OK, it’s more like 14 now, it’s taken a while for this post to make its way from my brain into text. ↩︎
Exercise for the sake of exercising just seems so overwhelmingly tedious and boring to me. And other types of exercise generally require social interaction, coordinating with people, and so on. ↩︎
Who decided to use “millimetres of mercury displaced” as a unit? You can’t just put random chemical symbols in units! That’s not how this works! ↩︎
Blood pressure readings have two parts: systolic (the pressure when the heart is beating) and diastolic (the pressure between those beats). They’re generally presented with the systolic reading on top and the diastolic reading below, and read as “X over Y”. Now you know what some of the random numbers they shout in medical shows mean! Yay learning! ↩︎
No thanks to how much salt is in everything. I’m pretty sure I’ve had at least twice the recommended daily amount of salt in a single serving before. Don’t even get me started on the things that are “low salt” but are still full of sodium from other sources. I don’t have a problem with ionic compounds, I have a problem with sodium! ↩︎
This mainly looks like drawing graphs that are slightly different to the graphs in the Apple Health graphs, for reasons I’m not sure I can explain. Making graphs is fun, OK? ↩︎
Complications are basically just home screen widgets, but with a fancy name because they’re on a watch. ↩︎
Tailscale actually causes me some problems here: everything works fine when the watch is connected to my phone, as the phone handles the Tailscale part, but if I’m not carrying my phone the watch will try to connect over WiFi directly and doesn’t understand anything about Tailscale. It happens infrequently enough that I’ll just live with it; it’s not much worse than having no signal on a phone. ↩︎
Yay walled gardens… ↩︎
I don’t object to subscribing to things in general, but it has to be something that’s worth the ongoing cost and offers something in return for the subscription. A watchface doesn’t need enough ongoing maintenance to justify subscribing to it, it’s just a cash grab. ↩︎

Fixing a loud PSU fan without dying

2025-07-30T00:00:00Z

Three months after I built my new computer, it started annoying me. There would occasionally be a noise that sounded like a fan was catching on a cable, but there weren’t any loose cables to be a problem. Over the course of a few weeks, the sound got progressively worse to the extent that I didn’t want to use the computer without headphones on. I measured the sound at 63 dB, which is about the sound of someone talking. That may not sound terrible, but it’s a constant, nasty noise coming from something that sits about 40cm from my head.

After some investigating¹, I identified the PSU fan as the culprit. I have a Cooler Master V750 SFX, which is not super high-end, but wasn’t cheap, either. It shouldn’t be developing issues after three months. Thankfully, it comes with a ten-year warranty, so it should be easy to get sorted, right?

Warranty woes

I looked at Cooler Master’s warranty, and for issues within the first two years you have to deal with the retailer. That would be Amazon in my case. So I looked at Amazon’s information on warranty issues. Their policy is that if it’s more than 30 days since purchase, you have to send it off to a third-party repair center and wait for them to diagnose and try to repair it. Here’s the kicker:

Usually repairs take up to 20 business days (including delivery time), but could take slightly longer

I use the computer for work, have upcoming LAN parties to go to, and generally can’t do without it for an entire month. That’s assuming they reproduce the issue: the PSU fan only turns on when it reaches a certain temperature, so if you just plug it in briefly it won’t exhibit any symptoms.

If I was going to do a warranty return, I’d need to buy a new PSU first to use while this one was away. If I’m spending £100+ on a PSU, then I’d be getting a better one that doesn’t have known issues with the fans. So when the Cooler Master eventually got returned I’d have no use for it. What a waste.

So the warranty is about as much use as a chocolate teapot. Good to know, I guess. If I wanted decent service, I should have probably used a real retailer, not Amazon. Lesson learnt.

Doing some research

If the warranty is useless to me, maybe I should just void it and try to fix it myself. I did some research online. Most of the results went like this:

if you’re not a trained professional you should not be opening up your PSU at all. There’s a lot of current that goes through it which will seriously hurt/main/kill you

it’s time consuming and potentially dangerous

or some other variety of doom and gloom. There were some actually useful results sprinkled in, though. A post on the smallformfactor.net forums details someone swapping out the fan on the 850W version of the same power supply because it was too noisy. It looks like the fan connector in the PSU is a two-pin connector, and they just used an off-the-shelf adapter to convert the standard four-pin case fan connector. It sounded a bit annoying to make it all fit, though.

A similar post on reddit showed basically the same upgrade, but identified the connector as a 2.54mm JST-XH. They crimped their own connector on, which feels a lot better than using a bulky connector. I do have a crimping set for JST connectors, but I absolutely hate doing them because they’re so fiddly and annoying. I’m not sure if I trust one of my crimps inside a power supply, either.

Looking at the pictures in those posts, I identified the fan as an Ong Hua HA9215VH12FD-F00. I searched to see if I could see any specifications for it. I couldn’t. But what I did get back as my first result was another Reddit post, this one titled “Getting rid of a HA9215SH12FD-F00 fan from your PSU”. It says something about the quality of a component when the first result is a post about getting rid of it because it’s annoying².

All of these mods seemed easy enough, and I’m reasonably confident in my ability to both discharge and avoid touching capacitors, so I probably wouldn’t die. I ordered a Noctua NF-A9x14 fan and some pre-made JST-XH connectors and waited for them to arrive.

Upgrade time

The replacement parts arrived one evening, so when I turned the computer off for the night I unplugged it from the mains, held the power button down for a while, and left it overnight for good measure. The next morning I popped open the case, disconnected and removed the PSU, gleefully tore the “warranty void if removed” sticker off, and opened it up.

Removing the fan was simple: unplug the JST connector and undo the screws holding it to the outer panel. I confirmed that my JST connectors were the right size, then started surgery on the Noctua fan. I carefully removed the heatshrink, cut off the normal fan connector, and separated out the four wires. A quick check of their FAQ confirmed the wiring colours: black was ground, yellow +12V, and blue and green used for speed control (which we’re not using in this instance). I clipped the blue and green wires off near the hub so they wouldn’t be in the way, then cut the yellow and black wires down to length, and attached the JST connector with a solder seal:

Old fan, new fan, burnt mouse mat

In the process I discovered my mouse mat doesn’t like being hit with a heat gun. Whoops. The solder seals are great: the solder in the center melts to form an electrical connection, the parts at the end grip the cable to provide mechanical strength, and the whole thing acts like heatshrink and keeps the connection insulated. A lot less fiddly than crimping JST connectors, and a lot smaller and cheaper than an adapter.

I installed the fan and reassembled the PSU. Then undid it all and tried again, as apparently the face the fan mounts to isn’t quite symmetrical and I’d installed the fan upside down. Connected everything back up, plugged the computer in, booted it up, and… nothing. The PSU doesn’t actually power the fan until it hits a certain temperature. I figured putting it under load would probably heat it up, so ran a graphics benchmark a few times. Eventually the fan spun up. Huzzah.

Soon the entire computer will be beige and brown

Peace at last

I measured the sound of the new fan: 43 dB. That’s a decrease of 20 dB. Due to the weird logarithmic properties of the dB scale that no one understands, that means it sounds about 4 times quieter to human ears. Big improvement!

It’s worth pointing out this isn’t a straight one-to-one upgrade. I don’t know the specs of the old fan in terms of airflow, and I’m just assuming that the Noctua will be good enough by virtue of being a decent fan. They also behave slightly differently as the power ramps up: the stock fan starts spinning at a lower voltage than the Noctua, which needs around 7V to get started properly³. I don’t think this will be an issue, as it’s effectively just putting a small step at the lower end of the fan curve. It might shorten the overall lifespan of the PSU, but from my point of view it failed after four months, so any extra time is a bonus.

I recorded some before/after audio, so you can hear the difference. I think there’s some amount of volume normalisation going on, so it’s not quite as stark a difference as in person, but it’s still noticeable.

Audio sample from the old fan

Audio sample from the new fan

And if you couldn’t hear it, here’s a visual representation:

Side-by-side comparison of the audio clips

The whole upgrade took about an hour (less time than writing this post about it!), and I even managed to avoid killing myself.

Opening the case and sticking my ear near to various components. High-tech stuff. ↩︎
On closer inspection it’s actually a slightly different model — there’s an S not a V in the middle there — but I’m going to assume that doesn’t change much on the quality/noise front. ↩︎
It then keeps spinning down to about 5V or so, it just needs enough power to initially get started. ↩︎

How I use Tailscale

2025-06-25T00:00:00Z

The Tailscale logo

I’ve been using Tailscale for around four years to connect my disparate devices, servers and apps together. I wanted to talk a bit about how I use it, some cool features you might not know about, and some stumbling blocks I encountered.

I’m not sure Tailscale needs an introduction for the likely audience of this blog, but I’ll give one anyway. Tailscale is basically a WireGuard¹ orchestration service, with lots of nice features sprinkled on top. It’s a subscription product, but it has an insanely generous free tier that covers basically anything you’d ever want to do as an individual. They also open source all their client software, and there’s a third party control server implementation called Headscale if you want to avoid the hosted system entirely.

Basic connectivity

At its core, Tailscale lets you easily connect from one device to another, even if they’re not directly exposed to the Internet. You install the Tailscale client wherever you like (on your phone, computer, servers, Raspberry Pi, etc), authenticate the machine with the control server, and it can then talk to all the other machines on the tailnet using their private Tailscale IP addresses.

That isn’t anything revolutionary: it’s the basic premise behind VPNs. But Tailscale makes it so easy. You don’t have to bother with any networking configuration. You don’t have to distribute keys. You just install the client², and login.

For example, my home automation service runs on a Raspberry Pi that sits behind two different routers. I installed Tailscale on it³, logged in, and immediately I could SSH into it from my computer or my phone even when they’re on different networks.

Speaking of SSH, Tailscale has special support for it whereby it handles any incoming connection to port 22 from the Tailscale network, and deals with authentication itself. No public keys or passwords: if you’re logged into Tailscale you can be logged into the machine. This is particularly handy when you SSH from a phone, as proper credential management is a bit of a nightmare there.

Exposing entire machines is just the start, though. If you run multiple services on the machine you need to remember which port they’re all on. Yuck. Instead, you can expose individual services as their own node on a tailnet. There are lots of options for doing so: there’s an official Docker image, a Go library, and many third-party tools (such as my own Centauri and tsp).

Not just a VPN

Exposing individual services wouldn’t be much use if you still had to remember their IP addresses. For a long time I manually added DNS entries for Tailscale nodes, allowing me to connect to http://grafana/ instead of http://100.73.190.100. Recently I switched to Tailscale’s MagicDNS, though, which takes care of that for you. Every machine on the tailnet gets an automatic DNS entry based on its name.

I initially shied off of this because it changes the DNS resolver on every machine it’s installed on, and it all seemed a bit too “magic” for me⁴. I got fed up with manually adding DNS entries though, so I spent a bit of time learning about it and got over my knee-jerk “what on earth is going on?!” reaction. The DNS controls also let you force a specific upstream DNS server. I use NextDNS everywhere, so having Tailscale automatically configure this for me on all my devices was a bonus⁵.

As well as the short names, you can resolve nodes on the tailnet using a slightly longer form: machine.your-tailnet.ts.net. The “your-tailnet” bit is randomly generated, and you can reroll it in the control panel to find a fun one. But why waste time say lot word, when few word do trick? Because Tailscale can make these addresses globally routable, and issue TLS certs for them too.

Say you’re developing something on your local machine, and want to get feedback from someone. You can use Tailscale’s “funnel” feature to expose it publicly:

tailscale funnel 127.0.0.1:8080

With no other options, this will expose the service over HTTPS on port 443. You can then invite people to visit https://machine.your-tailnet.ts.net and they’ll connect through to port 8080 on your machine. They don’t even need Tailscale installed. I don’t use this terribly often, but it’s a great quality-of-life improvement on the occasions I do want to share something.

Tailscale also has a “serve” command, which does much the same but only exposes it over your tailnet. This is how you’d use the Tailscale Docker image to expose a normal service onto your tailnet, but it’s also useful for similar development scenarios. Occasionally I’ll want to test something on my phone, and rather than make sure it’s connected to the right Wi-Fi network, recompiling the app to not bind to localhost, figuring out my machine’s IP, and so on, and so forth, I just run tailscale serve and access it over Tailscale.

Authentication, two ways

One of my minor frustrations with Tailscale was how cumbersome the authentication process was. I logged in using GitHub, and every time I tried to login to Tailscale, I had to bounce through the GitHub OAuth flow and then select which organisation I wanted to use. Even if I was logged in to GitHub, it still shows the permission page every time. It’s not a dealbreaker, but it’s definitely not smooth. This is what it looks like:

Logging in to Tailscale with a GitHub account

Tailscale have since added the ability to sign in with a custom OIDC provider, so I set up a KeyCloak instance, and my login flow now looks like this:

Logging in to Tailscale with KeyCloak as an OIDC provider

It’s a significantly shorter flow, and because KeyCloak is entirely under my control I can configure how long I stay logged in for. It also reduces my reliance on third parties: if GitHub goes down, or decides to ban my account⁶ or something, I can still access Tailscale.

That’s how you log in to Tailscale, but Tailscale can also assist with logging in to other services. If you connect to a HTTP service over Tailscale, it will add in the following headers:

Tailscale-User-Login: alice@example.com
Tailscale-User-Name: Alice Smith
Tailscale-User-Profile-Pic: https://example.com/photo.jpg

A lot of software has support for accepting login credentials provided by a reverse proxy, which is basically what’s happening here. For example, I run a Grafana instance that’s only exposed over Tailscale. Its config (set in environment variables) is:

GF_USERS_AUTO_ASSIGN_ORG: "true"
GF_USERS_AUTO_ASSIGN_ORG_ROLE: "Admin"
GF_AUTH_PROXY_ENABLED: "true"
GF_AUTH_PROXY_HEADER_NAME: "Tailscale-User-Login"
GF_AUTH_PROXY_HEADER_PROPERTY: "email"
GF_AUTH_PROXY_AUTO_SIGN_UP: "true"

So anyone who presents a Tailscale-User-Login header gets an admin account created with that as their e-mail address. It’s super convenient, but obviously make sure it’s only exposed via Tailscale if you do that!

Other services I run that support this include Miniflux (an RSS reader), Jelu (a book tracker), Linkding (a bookmark manager), and Seafile (a file storage system). If you’re hosting something yourself, look out for “proxy auth” or “remote users” in the documentation or configuration. It’s amazingly convenient to be able to access things without entering credentials.

ACLs, tags and mistakes

For a long time I didn’t bother with any kind of ACLs within my Tailscale network. Every machine could access every other machine. Then one day a thought hit me. The default Tailscale SSH config re-prompts you for user authentication, but I’d disabled that by tweaking the config… That means anyone with access to any of my machines (or who managed to get Tailscale credentials out of one of my apps) would be able to SSH into anywhere else on my network. Even as root! Compromising a small bit of my network would immediately lead to a complete take-over. What’s the point in defence-in-depth if you roll out a red carpet over the drawbridge for any attackers?

The first and most obvious fix for this was to restrict root access over SSH. I changed my Tailscale ACL to prompt for reauthentication for root access, but still allow regular SSH unprompted:

{
  "ssh": [
    {
      "action": "accept",
      "src":    ["autogroup:member"],
      "dst":    ["autogroup:self"],
      "users":  ["autogroup:nonroot"],
    },
    {
      "action": "check",
      "src":    ["autogroup:member"],
      "dst":    ["autogroup:self"],
      "users":  ["root"],
    },
  ],
}

This still didn’t sit right with me, though. Why should a random webserver be able to (theoretically) SSH into my desktop computer unchallenged? Tailscale allows you to do more advanced ACLs by applying tags to devices. I dutifully created a bunch of tags, and went through and tagged every device: user, server, app, container, and so on. This, it turns out, was a mistake. I could no longer SSH to anywhere. If I’d read the docs properly, I might have noticed how they describe tags:

Tailscale tags are how you authenticate and identify non-user devices, such as servers and ephemeral nodes. They serve two primary purposes: to provide an identity to non-user devices and to let you manage access control policies based on purpose.

By applying a nice user tag to all of my devices (computer, phone, tablet and so on), I’d effectively removed my own identity from them. They no longer counted for the autogroup:member source in the SSH config. Whoops. And it’s not easy to fix either:

You cannot remove all tags from a device. A device with a tag-based identity must have at least one tag.

So I’d have to remove all the affected devices, then re-add them. At the time I wanted to roll back all the tags, which would mean reconnecting dozens of nodes to the Tailnet. I did end up doing that, but I also took it as an opportunity to switch to KeyCloak as I mentioned earlier. Setting everything up again was a bit less painful when it wasn’t just correcting a dumb mistake.

I now have a much more sensible tag setup: servers are tagged server, apps are tagged app, and a few special apps are tagged integration. I then use Tailscale’s grants to limit access within the tailnet:

{
  "grants": [
    {
      // Users can access everything
      "src": ["autogroup:member"],
      "dst": ["*"],
      "ip":  ["*"],
    },
    {
      // Servers and integrations can access integrations and apps
      "src": ["tag:server", "tag:integration"],
      "dst": ["tag:integration", "tag:app"],
      "ip":  ["*"],
    },
  ],
}

This stops anyone but a user device from accessing servers, and stops plain apps from accessing anything at all. So for example my Grafana instance is tagged as an app; it doesn’t connect out over Tailscale for anything, it only exposes its interface over Tailscale. My home automation software is tagged as an integration, as it reaches out to other services over Tailscale (e.g., to push metrics it receives from devices).

You could go even further and limit which specific machines talk to which others, but I think this tier system sets reasonable boundaries for my use without getting too much in the way.

Even more

There are lots of other cool features offered by Tailscale that I’ve not covered: exit nodes (allowing you to route normal Internet traffic over Tailscale; very handy when you’re behind a router you don’t trust, or if you want to appear as being in another country for totally legitimate reasons); Tailscale lock (a system where existing nodes have to verify any new ones, guarding against both unauthorised access and Tailscale themselves inserting nodes into your network); file sharing, and more I’ve probably forgotten.

As I mentioned before, an awful lot is available on the free personal plan. It’s definitely worth checking out if you manage servers, or self-host anything. I can’t imagine going back to managing servers and private apps without Tailscale, and I’m excited to see what else they do going forward.

If you’re not familiar with it, WireGuard is a modern VPN included in the Linux kernel. It’s basically the only VPN that isn’t terrible. ↩︎
They have installation instructions and packaged versions of the client for just about every device you can imagine: Windows, Mac, every major Linux distribution, iOS, Android, etc, etc ↩︎
They even have an apt repository specifically for raspbian builds, so it’s super easy. ↩︎
Lots of people seem to treat “magic” as a good thing in software. I think it’s the absolutely opposite. I want to know how something works, not for it to be inscrutable! ↩︎
This is entirely optional, of course, you can just let each device do their own thing as well. ↩︎
I don’t think this is likely, but it’s one of my biggest concerns about using “social” logins. More-or-less all of these services can arbitrarily ban you with no recourse; why would you trust them as keyholders to other things? ↩︎

Building a new Computer

2025-06-03T00:00:00Z

The finished PC. Cat pen for scale.

I recently¹ built a new computer, after exclusively using a laptop for three years. It’s also the first time I’ve departed from the usual combo of an Intel CPU and Nvidia GPU.

While the form factor of a laptop did make it amazingly handy for travelling and attending LAN events, it was starting to show its age and there was basically no sane upgrade path. The main problem was its 3060 mobile graphics card, which was okay for the first few years and then slowly descended into painful. At the time, the (fairly disappointing) 50-series had just been released, but hadn’t yet made it into laptops. Nvidia had stopped production on the 40-series beforehand, so there also weren’t any compelling options there, either.

That’s not to say there were no laptops at all that I could have upgraded to. There were. Just not really any that ticked all of my perfectly normal boxes like “run Linux”, “have at least 64GB of ram”, and “run modern games well”. Having to upgrade the entire system just because the graphics card was showing its age was a bit of a drag, too. So back to the land of desktop computers I went!

To try to preserve some of that convenience, I opted for a small form factor (SFF) case. The computer and all the accessories can fit inside a hand-luggage-sized flight case. More on that later, though.

Components, Choices, and Cramming

So what, exactly, is in this computer? The case is a Fractal Design Terra, which is a lovely little 10.4L case². My last desktop PC was a normal-sized Fractal Design case, which I liked a lot, and it seems like they’ve upped their game since then. The Terra is both pleasant to look at (just look at that wooden panel!), and a breeze to work in. The sides and top are fully and easily removable, giving you great access to everything inside³. I expected an SFF build to be fiddly, but the case made it feel about the same as a normal full-sized build⁴.

The case with sides and top off, and wires everywhere in desperate need of management.

Another nice feature of the case is the movable spine. I think this is relatively common in SFF cases, but it was new to me. You mount the graphics card on one side of a metal divider, and everything else on the other. The divider (or spine) can be moved side-to-side depending on what exactly you’re putting in the case.

As I mentioned earlier, this was my first departure from the Intel + Nvidia bandwagon. Nvidia’s 50 series was underwhelming, and Intel managed to put out a generation of chips that literally fried themselves. It seemed like a good time to try out AMD’s offering! I went for the newly released Radeon RX 9070XT graphics card, and a Ryzen 7 9800X3D processor⁵. The processor has a Thermalright AXP90 X47 Full heatsink on top of it, with a Noctua NF-A9 fan on top of that.

The motherboard is a Gigabyte B850I Aorus Pro, and it hosts 2 32GB Corsair Vengeance RAM modules, and a 2TB Crucial T705 NVMe drive. Powering it all is a Cooler Master V750 SFX. The PSU is modular to reduce the number of wires that need to be fitted in, but they’re still pretty big and bulky. I’m tempted by custom cables but they’re rather pricey, and you can’t actually see inside with the sides closed…

With the diminutive size of the case and all the components crammed in, there’s actually no room left over for case fans. The PSU, GPU and CPU all have fans attached, but that’s it. There are stories online of people having heat issues, but thankfully everything seems pretty happy in my setup. The components all draw in air from the sides, and the hot air passively vents out the top. If I keep the CPU under maximum load for a while then it starts to thermal throttle slightly, but the only time I’ve actually managed that is when compiling a kernel. Why was I compiling a kernel, you ask? Well, we’ll come to that.

But does it Linux?

I didn’t go into this build completely blind. I did a bit of reading and chatting, and it sounded like AMD drivers were pretty good on Linux these days. I didn’t check specifically if any of the components were supported.

The 9070XT was released on the 6th of March. I built my PC on the 26th of March. The first version of Mesa (the 3D graphics lib) that was generally stable with 9070XT cards landed in Arch on the 20th of March. If I did the build just one week earlier, I would’ve had a much less fun experience.

It still wasn’t quite perfectly smooth, though. When playing games I’d occasionally have issues. In some cases the screen just went blank and came back after switching windows, but in others the graphics drivers couldn’t recover and the PC needed rebooting. Fortunately the drivers are open source, and they have a public issue tracker hosted by the Freedesktop project. Searching through the issues, I found they’d already been reported (by another Arch user, of course), and there were various suggestions for work-arounds, as well as lots of work trying to reproduce the issue.

Within a week, an AMD developer had posted a set of patches that might address the issues, and asked people to test them. That’s fortunately pretty easy on Arch: you just clone the repository containing the PKGBUILD file, drop in the patches, and update the checksums for them. Then you start compiling, realise you didn’t tell it to use more than one CPU core, abort it, and start again but this time running on all cylinders. Soon enough I was running a patched 6.14 kernel and the problems stopped completely. Others reported similar outcomes, and the patches worked their way into the kernel proper.

I spent a few weeks having to compile a custom kernel every time I accidentally updated it (I should’ve just stopped pacman from touching the kernel for a bit…), then one day the patches didn’t apply because they’d been merged upstream. Since then everything has been perfect.

A friend commented that “this wouldn’t happen with Nvidia”. They meant it negatively, but I wholeheartedly agree! Maybe Nvidia have fewer launch bugs than AMD, but you absolutely wouldn’t be able to talk to their driver engineers on a public bug tracker, and get access to test patches that fix your issue. I’ll happily take a few bugs in exchange for a company that operates openly in a way consistent with the rest of the Linux community.

But does it travel?

Travel mode, engage!

So the computer works fine at home, but how do I get it to other places? I just shoved a laptop in a backpack⁶, but you can’t quite do that with a PC even one this size. I’d seen a few people at LANs who packed everything in flight cases, but they always seemed a bit unwieldy. Doing some research, though, I found that I’d just be able to squeeze everything into a flight case sized to be taken onto a plane as cabin baggage.

Peli (or Pelican in the US) are the most well known maker of flight cases, but I chose to go with Nanuk instead. Spec-wise they’re fairly similar. Nanuk are a bit cheaper. The killer difference for me, though, is that Nanuk publish STEP files of their cases. As someone with a 3D printer, giving me CAD models of things so that I can easily mod them is definitely a way to win my favour.

After lots of measuring and thinking and modelling I came up with an arrangement where everything could fit snugly into the case. The case has cutouts for the wheels and handles, which constrain what can go where. I ended up wanting the computer at the handle-end of the case to make best use of space, but that means it needs something to take its weight when the case is vertical. The solution was, of course, 3D printing.

Using the STEP files from Nanuk I designed an insert that spans across the case, with screw holes that line up with the ones in the flight case. I wasn’t sure it would be able to take the weight like that, so I also added in some supports in the other direction (running down to the bottom of the case, if it’s stood up). I ended up printing it in three parts, and it came out perfectly first time. I can’t emphasise how nice it is having CAD models instead of having to measure and guess at things.

With the support in place, I focused on cushioning the computer. I opted for 10mm thick EVA foam as it’s easy to obtain and work with, and doesn’t take up too much room. I used contact adhesive to glue the foam directly to the case and the 3D printed divider. There’s a piece that goes between the computer and the keyboard, so I printed some little 3D supports to hold that more firmly in place, and stuck those in with contact adhesive as well.

So how does it all hold up? It’s been to one LAN event so far, and it’s great. I think the flight case might actually be easier to carry than hefting a heavy backpack: the handles are sturdy and comfortable, and it has chunky wheels for pulling it around. It’s also actually easier to get everything set up when you can see it all laid out in the flight case and pull out what you need, and then the case can be tucked away out the way for the duration of the event.

Recently-ish. It may or may not have taken me a few months to get around to writing this post. ↩︎
Using litres to measure computer cases always feels wrong. Those are the units we use for water. Don’t put them near the computers! ↩︎
The case also has holes to put security screws in to stop all of these nice easily removable parts from being removable. Very handy when you’re leaving it unattended at a LAN. ↩︎
Which for me means it was good fun for about an hour, and then I got fed up and just wanted it to be done already. ↩︎
Three months in and I still can’t remember these random strings of numbers. Someone even explained the versioning scheme to me. ↩︎
Along with a portable monitor, mouse, keyboard, headset, mouse mat, kensington lock, power supply, cables, and controller. It was a heavy bag. ↩︎