Chameth.com - posts like curse-of-knowledge-blogging, debugging-beyond-the-debugger, monitoring-power-with-wemo, why-you-should-be-using-https

Monthly Meanderings: January 2026

2026-02-01T00:00:00Z

Welcome to the second edition of my monthly meanderings. For a bit of context, you can check out the introduction to the first edition.

Website updates

It’s been a pretty busy month for chameth.com. Three blog posts: The Meaning of Life — an entry into the IndieWeb carnival where I mostly review a book on Stoicism — Surge Protectors: Marketing vs Reality which is a dump of a research rabbit hole I fell into, and An Interesting Tailscale + Docker Gotcha which documents a fun problem I encountered.

I’ve also made a new films section, which is basically my Letterboxd data but free range instead of cooped up in a silo. I imported my 200-odd reviews, and for the last few I wrote the review on my site and then copied it over to Letterboxd. That’s what the IndieWeb folks call POSSE: publish on your own site, syndicate elsewhere. I like the idea that my website is the canonical source of truth for all the public things I generate. I want to expand this to some other areas in the future: music, video games, board games, etc.

I made most of the film components into “shortcodes”, so I can drop them into arbitrary pages or posts, like so:

Watched films ranked

Every film I’ve watched since I started logging, ranked.

Obviously super subjective, and subject to change often and arbitrarily.

264 films

Finally, I added a new widget to the bottom of most pages: a “nod” button. It’s effectively a “like” or “kudos” button but deliberately does not track how many times it’s been pressed, has no social network connotations, and won’t flood my inbox or hit rate limits if it gets spammed. If you click the button, it simply sends a message to a private IRC channel that says “Someone nodded at $URL”. I’ll probably write a bit more about it in a blog post in the future.

Other projects

I only have one small non-chameth.com update: a new project called pigeonhole which provides a really basic web service that lets you leave messages in a named cubby, and retrieve them at a later date. I’m using it to automate adding things to my Obsidian notes from my Apple Watch. There’s lots of reasons why that isn’t as simple as it sounds. I went through a bunch of iterations to try and make it work before just writing code to fix it.

I wanted to do this because I’m trying to replace Todoist with just having tasks in Obsidian. I already used Obsidian for longer form notes, but I’ve now also started using it for drafting blog posts (I’m typing this in Obsidian right now!), and trying to keep more useful day-to-day notes. I’ll probably write a blog post with more details once I’ve figured everything out.

Finally, I’ve been moving a bunch of projects to a private Forgejo instance, with the ultimate goal of having all of my projects live there. I’m going to mirror the contents out to GitHub and maybe other places, but Forgejo will be the single source of truth, and where all the workflows/dependency wrangling/etc happens. I’ve got Renovate configured to do dependency bumps, and I’m very much liking the whole setup so far. I’m saying it a lot but again: I’ll blog about it in more detail when it’s a bit further along.

Entertainment

I mentioned last month that I was playing Hogwarts: Legacy. I finished that off, and have been struggling to find something to scratch the same itch. I’ve tried a whole bunch of open world games, and basically none of them work for me. They have cumbersome control schemes (yay console ports), really awkward or sluggish movement, and so on. I think I’m just too fussy, but if I’m going to sink dozens of hours into a game it shouldn’t feel annoying or like a chore!

I did play through Thank Goodness You’re Here, which is delightfully funny but sadly only took 3.6 hours to finish with 100% of the achievements. Still highly recommend picking it up, especially when it’s on sale for under ‘10 bob’. I’ve also started playing through Control, and I’m enjoying the ambience. There’s an insanely sharp difficulty spike for the first boss, though, which nearly made me put it down.

In other entertainment, I’ve been playing a load of turn-based games on Board Game Arena , and I’ve watched a bunch of films after barely watching any last month. Here’s another of those shortcodes to show them off:

Around the web

Remotely unlocking an encrypted hard disk

A fun post documenting using Tailscale in a very weird way to solve a relatable problem. Very much my cup of tea.

I charged $18,000 for a static HTML page

This one’s actually from 2019, but it’s the first time I’ve come across it, and it’s a fun story. As a contractor, deciding what to bill for and what not to can be a bit messy. Downtime between meetings? The ten minutes in the shower you spent thinking through a bug? It’s a lot more clear cut if the client wants you to sit in an office, twiddling your thumbs, though.

Oxide RFD: Using LLMs at Oxide

A wonderfully well thought out piece about using LLMs in a respectful, sensible manner. I’d been thinking about writing something similar, but it wouldn’t have been anywhere near as well crafted as this. While I basically agree with it all, the part about LLM-generated text really resonates:

LLM-generated prose undermines a social contract of sorts: absent LLMs, it is presumed that of the reader and the writer, it is the writer that has undertaken the greater intellectual exertion.

Your app subscription is now my weekend project

Roberto points out that monthly SaaS subscriptions start looking even less appealing when you can just prompt an alternative into existence. I talked a bit about using LLMs for one-person software before, and it becomes even more appealing when the alternative is paying monthly for a service that keeps shoe-horning in features you don’t want, making you agree to share data with 329 “trusted partners”, and/or repeatedly ratcheting up the price.

Ekul’s Internet Space

I love the aesthetics of this personal site, and the data tracking that goes along with it. I’m also slightly aghast at the amount of Monster consumed! Makes me want to track more things and expose them on my own site.

Monthly Meanderings: December 2025

2026-01-01T00:00:00Z

For a while I’ve been idly thinking about a way to get smaller bits of content onto my website without it being too annoying for me, or too hard to consume. Things like interesting links, small project updates, and so on.

I didn’t immediately come up with anything I was happy with, so just sat on it. Ignoring the problem seems to work surprisingly well for things like this. I’d been meaning to redesign the about page for a while, but wasn’t sure what to do with all the interests I wanted to list. After ignoring the problem for a while I came across the interests directory and realised I could just bundle all those things into their own page.

This seems amazingly obvious in hindsight, but I think I needed a bit of a push to accept that a page just about my interests was… well… interesting. Anyway, as the end of December rolled around, I got a similar dose of inspiration: a flurry of monthly round-up posts from various blogs I follow. If I bundle up all the small bits and bobs, it’ll make something vaguely blog post shaped, and writing and consuming those is already a solved problem. Again, pretty obvious in hindsight, and again I think I just needed a nudge to shut up the little voice in my head saying “but those people all have interesting things to say… do you, really?”

So without further ado, welcome to the inaugural post in my new monthly meanderings series. If you have any feedback on the format or contents, please drop me a note with the contact form at the bottom!

Website updates

As already mentioned, I reworked the about page and split out a new interests page. The old about page had a few lists of interests show up in thought bubbles when you hovered over things, which was a cool effect on desktop, but barely worked at all on mobile. The new page gives me a lot more room for waffle, and I do like waffling.

Only a single new blog post this month: exposing game servers over Tailscale. Just a quick how-to I wrote up, having not found it documented usefully anywhere before. I have a bunch of ideas for posts I want to write, but none of them have really sparked joy quite yet, so I’m once again employing the “sit on them for a bit and maybe inspiration will strike” approach.

Other projects

I created a small collection of Docker related projects this month: containuum is a go library that helps with listing containers, and keeping that list up-to-date. On top of that I built centauri-docker-confd which generates a config for centauri (my reverse proxy) based on running Docker containers. I already had a way of doing that, but containuum is designed to be a bit more robust, and I made it so the config can be passed over a network connection instead of having to write it to disk and then signal the proxy to reload.

The next project has a bit of backstory: after reading I got hacked, my server started mining Monero this morning [warning: the article is interesting but a bit LLM-sloppy] I realised that I, too, was running a vulnerable version of Umami. Luckily, as far as I can tell, it wasn’t exploited. But it got me looking into automated vulnerability scanning. I don’t put much stock into it normally, as you get so many false alerts, but this is one case where it would have definitely helped. There didn’t seem to be any good solution for my “middle-of-the-road” approach to containers (lots of containers, but not needing Kubernetes), so I wrote purser. It takes every image used by a running container, runs them through Trivy, and generates a combined report. I’ll add some form of active notifications to it in the future.

Entertainment

This month I’ve been playing a lot of Hogwarts: Legacy, after picking it up for free on Epic Games. I grew up with the Harry Potter books coming out, and while I’m not a super-fan, it still has a special appeal to me. Obviously she-who-must-not-be-named is doing her best to out-evil Voldemort, but I think you can still enjoy the universe despite that. Especially when you don’t have to contribute any money that might go towards her.

Anyway, the game is surprisingly fun. They did a really good job of making it feel like an open world. You want to walk around from place to place to see everything, find all the various collectables, and so on. Compared to Far Cry or Cyberpunk the world is a lot smaller but that means it’s far more densely packed with stuff to do. I initially didn’t vibe with the way combat works: it’s pretty heavily reliant on dodging or shielding against incoming attacks, which reminded me a lot of Clair Obscur: Expedition 33. Fortunately, it’s a lot more forgiving in Hogwarts: Legacy and I got used to it after not too long.

It’s been a relatively sedate month for other forms of entertainment. I saw Fackham Hall and Wicked: For Good at the cinema. The former was a funny romp, vaguely reminiscent of Airplane or The Naked Gun, as you’d expect from something penned by Jimmy Carr. Wicked was… fine? I wasn’t overly enamoured with part one, so it’s not a surprise I didn’t vibe with the follow-up. If you smushed them into a single normal-length feature I think they would have made a really good film, but two films both over two hours long is a bit much for what actually happens.

Around the web

Wikipedia: List of citogenesis incidents

A list of incidents where (often false) information on Wikipedia has ended up becoming its own source. That led to Mark Dominus’ blog post titled Imaginary Albanian eggplant festivals… IN SPACE where he discovers that a mountain on Ceres got named after a made-up festival (and then got it fixed!)

Not relying on Wikipedia as a source was drummed into us at school, but it feels like this sort of thing is only going to get worse and worse now LLMs are on the scene. I assume we’re already at the point where LLM hallucinations are prevalent enough that they’ll find their way into the training data for future iterations.

Simon Collison’s website

I really like the design here. Both the homepage and how well every journal entry is formatted. It makes me feel bad for the many walls of text that adorn this site. The archived v4 design is also wonderful.

My Dinner with Skinner

A 43-minute-long feature film that is “just” the Steamed Hams gag from The Simpsons done in the style of My Dinner with Andre. There’s a (much shorter) behind-the-scenes video that goes over the extreme amount of effort that was put into it, too.

I’m still trying to wrap my head around this. It’s… something.

Delete Spotify? Sure, But Don’t Just Replace it With Another Subscription

A similar take to my own escaping Spotify the hard way, but it avoids getting lost in the technical weeds like I did. (In my defence, they’re very fun weeds to get lost in.) Stephanie is also one of the people that does monthly wrap-ups, and I was pleasantly surprised when the latest one popped up in my RSS reader and I saw my own site linked.

Blogging and the Imaginary Quality Bar

2025-09-18T00:00:00Z

Recently I realised that I’ve developed a self-imposed quality bar for blog posts. They need to be a certain length, and have a certain substance to them. They need to be generally useful in some way I can’t quite define, to some imagined future audience. They need to have images to break up the page, and opengraph data for when they’re linked to on social media. But… maybe they don’t? Those things all make sense for longer “article” type posts, but not so much for a personal blog.

I’ve done some fiddling so that I can make posts without all that extra stuff. We’ll see how it goes. The posts won’t be distinguished on the site (yet?), but I have set up separate RSS feeds for just short form posts and long form posts in case subscribers are radically opposed to one or the other. Now I can start blogging like it’s 2005 again. But hopefully with a bit less cringe.

I’ve been staring at this post in my editor for about five minutes. The urge to make it longer, more thorough, more article-like is really strong. This entire paragraph is only here as a compromise with myself so I can actually save and commit the post.

If all you have is a hammer…

2025-06-18T00:00:00Z

This, dear reader, is a hammer. It is almost entirely irrelevant to the article. Enjoy.

I presume everyone is familiar with the idiom “if all you have is a hammer, everything looks like a nail”. If not, well, there it is. It’s generally used pejoratively about being single-minded, but I think it also gives a glimpse into something more interesting: mental and perceptual sets.

Before I explain, let me tell you a story about a person who bought a 3D printer¹. When they were first thinking about getting one, they weren’t sure if it was worth it. They could print a few board game accessories, but then what? After they got it, though, a whole new world opened up: everywhere they looked there were opportunities to improve things by adding 3D printed plastic. Broken appliances were repaired with 3D printed parts, all sorts of shelves, organisers, hooks and other things were made. But when they talked about this to other people, most often the response was “That’s nice, but I don’t think I’d use one”. How could they not see the truth in all its glorious layer lines?!

The answer is in the concept of a ‘set’², and instead of trying to explain it, I’m just going to quote Wikipedia:

In psychology, a set is a group of expectations that shape experience by making people especially sensitive to specific kinds of information. A perceptual set, also called perceptual expectancy, is a predisposition to perceive things in a certain way. […] A mental set is a framework for thinking about a problem. It can be shaped by habit or by desire. Mental sets can make it easy to solve a class of problem, but attachment to the wrong mental set can inhibit problem-solving and creativity.

This perfectly captures what happened. They’d developed a ‘3D printing mental set’: a predisposition to see problems that can be solved with their ~~hammer~~ 3D printer. Once I started noticing this pattern, I started seeing it all over the place.

Sets at work

Aside from the “could this be improved with some 3D printed plastic” perceptual set, I’ve noticed a couple of other sets: DIY, and writing puzzles.

DIY is probably the most obvious one. Once you become a little familiar with the basics of what you can fix and how, it seems like you start noticing the opportunities more. Before, you might have ignored that loose door handle, but now you notice it and realise with a screwdriver and a sex bolt³ you can fix it and stop it coming loose again anytime soon.

As you do more things, you build up your set of mental sets as well. You learn how to attach things to different types of walls, how to safely work with electricity, and so on, and suddenly installing a new outside light goes from a seemingly complex job to just exercising some of those concepts you’re already familiar with.

This works across ‘disciplines’ as well: I wanted to automatically cool a room down, using a fan in the window to blow in cool air. The 3D printing mental set gave me a way to make it physically go where I wanted it to, the home automation set gave me a plan for how to automate it, and the electricity set helped me figure out how to wire in the relay. It sounds a bit stilted when I spell it out like that, but the catch is I didn’t have to sit down and work any of this out. I was already primed to think in a certain way. I had a whole selection of hammers, and could pick the right combination of them to beat this particular nail⁴.

Puzzles are a bit different. I enjoy taking part in puzzle hunts⁵, and at first I was bewildered at how the authors came up with all the puzzles. After I started thinking about writing some myself, though, I began to notice all kinds of things that could maybe be turned into a puzzle: a specialised database, or a song with repetitive lyrics, or set of things with unique ID numbers. Writing the actual puzzles is still tricky, but once you’ve equipped the “look out for puzzle material” perceptual set it’s much easier to gather a range of ideas.

For example, one puzzle I wrote came about because I stumbled upon Sir Patrick Stewart’s Cowboy Classic Sampler⁶. I think everyone will agree that it’s a fairly unique collection. I tied some samples of the songs together with some screen captures of Sir Patrick as Picard in Star Trek: The Next Generation, and puzzlers had to find the season and episode numbers of the pictures, then use those numbers to select a track and a word from that track in the audio mix. Those words spell out a question, and the answer to that question is the answer to the puzzle.

There were other hints mixed in to point you in the right direction, it wasn’t quite as opaque as it might sound! But the point is without being in that “puzzle finding” mindset when I came across the album, there’s no way I could have come up with that puzzle. Like with the fan, I was primed to think a certain way, and managed to create something I otherwise would have struggled with.

The curse of noticing things

Figuring out how to make stuff isn’t the only place sets appear, though. Perceptual sets are about how we perceive things. When you read something with lots of bullet points, em-dashes, and the word “delve” do you automatically think it’s LLM generated?⁷ Then you have an LLM text perceptual set! It’s kind of annoying, as it’s difficult to “turn off” and stop noticing these things once you’ve seen them. Similarly, I think I have a “bad grammar” set. I know it doesn’t bother a lot of people, but if I’m reading a book and there’s a rogue apostrophe it will throw me right out of the moment. It’s like tripping up when walking and being torn out of a daydream. There’s some use to these — being able to notice grammar errors easily helps with my writing — but for the most part they’re a negative input: they point out things are broken or bad.

The “edge case set” takes this to another level. After about 20 years of writing software⁸ I have a finely honed ability to spot problems. Give me something to implement and my brain will immediately rattle off all the different edge cases and under-specified parts. Then some other bit of my brain gets the job of deciding which we actually care about, which are worth raising, and so on. It’s definitely useful to spot them up-front, rather than when you’re deep in the weeds implementing something, and tends to make everything go a lot smoother if you can hammer the major ones out when planning work. It doesn’t turn off after work though; it comes up when reading board game rule books, or descriptions of the magic system in fantasy novels, or news reports, and so on. It’s a lot less useful then.

Speaking of news reports, here’s a fun one: Gell-Mann amnesia is a cognitive bias where even when you critically assess media reports about something you’re knowledgeable about (say, technology), you continue to trust similar reporting in other areas (say, medicine). But once you know about Gell-Mann amnesia, you might start to actively notice when it happens. You scoff at the article about how the Internet is a “series of tubes” and then start reading the next one about a cancer treatment, but — wait a minute — your Gell-Mann amnesia set kicks in. I’m not sure what you then do with this information. Dismiss basically all the media and news as useless? It’s honestly pretty annoying.

The meta set

I’ve had this blog post on my ideas list since I first noticed the “3D printing mindset”. I didn’t know sets were an actual thing, and I didn’t have most of the examples I do now. As time went on with this idea rattling around in the back of my head, I started noticing the patterns come up more and more. There’s lots of more examples I didn’t include because I didn’t want to just write a listicle of mental patterns. But the fact that I noticed them all seems to mean that I’ve developed a set set, or a meta-set, if you will. It’s fascinating to think about how all this happens inside our mushy bag of neurons, but also a bit terrifying. If thought processes are that malleable, what stops you accidentally breaking them? Actually, thinking about things like Q-Anon, flat earthers, and a lot of contemporary “politics”, maybe that’s quite easy to do?

Image credits

Photo	Creator	Licence	Source
Hammer	Ian Talmacs	Unsplash License	Unsplash

Surprise! I am that person. Bet you didn’t see that coming! ↩︎
I feel like they should have consulted the mathematicians and/or computer scientists before they picked a name. ↩︎
Yes, that’s a real thing. No, I won’t ever use any of the alternative names for it. ↩︎
OK, I’ve strained the metaphor enough. I’m sorry. I’ll stop. ↩︎
If you’re not familiar, a puzzle hunt is a competition where you try to solve puzzles faster than other teams. The sort of puzzles involved are perfectly described by this quote from Mike Develin: “Imagine a word search. Now imagine you aren’t told what words to look for. Now imagine you aren’t told it’s a word search. Now imagine it isn’t a word search.” ↩︎
Go and give it a listen. I’ll wait. ↩︎
I hereby certify all my em-dashes are hand-crafted. Relatedly, Claude Code keeps writing comments that use hyphens when they should actually be em-dashes. Maybe they’ve trained it to avoid them? ↩︎
I just made myself sad by working this out. I still feel young at heart! … Or maybe that’s cholesterol? ↩︎

Home Automation Without the Megacorps

2025-05-21T00:00:00Z

I first experimented with home automation in 2016, by picking up a Samsung “SmartThings” hub. It was terrible. The UI to configure things was slow and clunky, firmware updates were applied whether you wanted them or not, and everything stopped working if their cloud services stopped. You were also locked into whatever integrations they deigned to support, of course. After that broke for the umpteenth time I scaled back and for years the closest I got to home automation was a couple of Hue bulbs.

Recently I’ve been building it out again, though. This time using off-the-shelf components that interop using Zigbee, open-source software, and some code I wrote myself. It’s great; it runs entirely locally and has had basically zero downtime. The Zigbee ecosystem lets me integrate all sorts of things without having to spend lots of money on “smart” alternatives. I think I’ve spent less on this incarnation than I did on the original SmartThings hub all those years ago (even without adjusting for inflation!).

My current setup

I run everything on a Raspberry Pi 4, with a Sonoff USB Zigbee adapter based on the CC2652P chipset¹. Interfacing with the Zigbee stack is handled by zigbee2mqtt (z2m for short), an open-source project that basically bridges your devices to an MQTT broker². When a device reports some data, it will send a new message over MQTT; when you want to make a device do something you just post a message back. It’s incredibly lightweight, but supports a huge array of devices out of the box. And as it’s just using MQTT, it’s trivial to integrate with other software or build on top of.

I know a lot of people building out this kind of home automation use Home Assistant, but I don’t get on with it terribly well. It felt incredibly sluggish, and the entire project is just a bit… much. I want a binary or package or docker image I can just run, not an entire operating system. That’s not how computers are meant to work! In contrast, z2m is simple to set up, super light weight and responsive.

Anyway. z2m exposes Zigbee devices over MQTT, so I wrote some code in Go to connect to the MQTT broker, and listen to the messages. It’s grown a bit beyond this now, and I’m skipping some boring bits like error handling and JSON parsing, but at first I had something like:

for {
    message, topic, err := c.ReadSlices()
    
    if string(topic) == "zigbee2mqtt/desk-button" {
        if strings.Contains(message, "single") {
            c.Publish(nil, []byte("{\"state\": \"TOGGLE\"}"), "zigbee2mqtt/room-lights/set")
        }
    }
}

I think I actually made this harder to read by trying to simplify it here, but hopefully you can follow that it was relatively straight forward to listen for a particular action to happen (in this case me “single”-pressing on the device called “desk-button”) and then make another device do something in response (toggling the state of the “room-lights” device).

So what actually are these devices? At present in z2m I have the following:

Some generic buttons
An air quality sensor (USB powered), and a separate temperature sensor (battery powered)
A light switch
Some 240V relay modules, that I use to turn non-smart devices on and off
Some USB relay modules, for the same purpose
Some “smart” plugs that I mostly use to monitor power usage
A motorised blind roller

I think all of these are either Tuya or Moes branded, and were all sourced from AliExpress. You can get the same things from Amazon or elsewhere, but they tend to be 3-4x more expensive for the same product.

One of the cool things about Zigbee devices is that the powered ones work together to create a mesh network, so you don’t have to worry about network repeaters or signal strength like you do with Wi-Fi networks. z2m even makes a map showing the connections:

The network map produced by z2m. You can see how all the powered devices form a mesh that the lower power ones can connect to.

Some interesting automations

A Zigbee relay spliced into the power cable for the fan

So what do I actually do with all of this? Some of it is just what I’ll call “laziness automation”: I want to be able to turn on the lights without getting up and walking to the light switch. So there’s a Zigbee button on my desk that does it. Then there are some less manual automations: my blinds are automatically closed at sunset³, for example. It feels a bit trivial, but it’s surprisingly nice just not to have to think about that at all.

Another nice quality of life automation is the light I have above my monitor. It’s USB powered, and I now have it going through a Zigbee USB relay that lets it be toggled on and off. Then I have a small agent running on my desktop that turns the light on when the computer is unlocked, and off when it locks or shuts down. I keep meaning to make a “film mode” that detects when I’m watching a film, and turning all the lights and blinds down, but I haven’t got around to it yet.

The most complex automation is probably for a window fan. It’s not smart in any way, so I cut the power cable and inserted a Zigbee relay. The whole thing is housed in a little project box to keep it secure. The relay basically acts as a switch: the live wire leading to the fan runs to the “normally open”⁴ contact, while the upstream power goes to “common”. When the relay is told to turn the fan on, the two get connected and the fan gets power. Oh, it’s also not actually a window fan, but I designed and 3D printed some adapters so that it sits right in the window.

So now we have a window fan that can be turned off and on automatically. But I don’t want to have to press a button to do that. I’m lazy, remember? Instead, I made it so that the Go code constantly monitors the temperature reported by the air quality sensor, and queries the free OpenWeatherMap API to get the rough temperature outside. It can then turn the fan on if the room is too hot, and outside is cool enough to make a difference (there’s no point in blowing hotter air in!).

A graph of room temperature, showing the effect of the fan being turned on and off

I don’t want it to do that all the time though. The room doesn’t need to be cooled if I’m not around. There are various Zigbee presence sensors you can get, but the cheaper ones seem to be of dubious quality. Instead, I wrote some code to guess whether I’m present. It uses the state of the monitor light as a proxy for “is the computer in use”, and then makes some guesses based on the last time the computer was used and the current time (if I turn the computer off at midnight it probably means I’m going to sleep; if I turn it off at 2pm it probably means I’m going out somewhere).

You can see in the graph that the fan has a decent impact on temperature. I coded it to cool the room to 19 degrees, but then not turn on again until it was above 20. This prevents it flip-flopping on and off constantly. You can clearly see the pattern in the graph, as it actively cools and then slowly the room warms back up. This arrangement is much better than being woken up at 5am because it’s painfully cold. Trust me.

Bonuses: metrics and 3D printer

One of the things my custom Go code does is collate all the various stats reported by the Zigbee devices, and inserts them into a VictoriaMetrics database. I originally hosted this on the Pi itself, and it performed fine, but I’ve since moved it onto a server so that I can use it for some other things as well.

I set up Grafana to point to VM, and can create dashboards showing power usage, what devices are turned on when, and a bunch of environmental conditions. This also makes it easy to spot how good the data coming from the devices are. For example, the air quality sensor reports a figure for the amount of Carbon Dioxide in the air, as well as the amount of Volatile Organic Compounds (VOCs). The graphs are basically identical, but on a different scale. It turns out this particular device has no actual way of detecting CO₂, so it just “calculates” it from the VOCs figure. Useful to know if you want to actually use that data.

Recently I came across a go library for interacting with Bambu Lab printers, so I’ve also hooked that into my automation. It exports metrics about the printer, so I now have a way of seeing what’s going on when I’m not physically present⁵. I even added a HTTP endpoint (exposed over Tailscale) that shows pictures from the built-in camera.

On the automation front, I’ve made it automatically turn off the printer’s light when it finishes a print, and also added push notifications via PushOver whenever the state changes. No longer will I be sat in another room blissfully unaware it ran out of filament seconds after I walked out the door!

Was it worth it?

These days you could probably just buy some kind of ‘smart home’ hub that works well enough, and do most of what I’ve done with a lot less effort and no coding. I’m still of the opinion that for something so essentially local, it should itself be managed entirely locally. I don’t trust companies like Google or Amazon not to kill their products, or change or remove an API I rely on.

Obviously the “Not Invented Here” approach of coding everything yourself doesn’t suit everyone, but as someone who enjoys coding and enjoys having things work just so it works very well for me.

It turns out the chipset is important. I initially used a similar Sonoff dongle that used a CC2531 chipset, and its performance wasn’t great. It often failed to pair with new devices, and dropped links to existing ones. The zigbee2mqtt docs do explicitly advise against the CC2531 chips for that reason. At the time they recommended CC2652Ps, so that’s what I went with. If you’re starting new I’d go with whatever their latest recommendation was. ↩︎
MQTT is basically a network protocol for publishing and subscribing to arbitrary messages. A broker is the thing that sits in the middle and routes the messages. I use Mosquitto but any will do. ↩︎
They originally also re-opened at sunrise but that was a terrible mistake. Who knew the sun rose so early?! ↩︎
“open” meaning “there’s a gap so it doesn’t work” not “open for business”. This confusion in terminology also extends to drawbridges. ↩︎
I use the printer in LAN mode, which means there’s no way to monitor it from a phone, even if you’re connected to the same network still. ↩︎