Chameth.com - posts like debugging-beyond-the-debugger, monitoring-power-with-wemo but not docker-automatic-nginx-proxy

Home Automation Without the Megacorps

2025-05-21T00:00:00Z

I first experimented with home automation in 2016, by picking up a Samsung “SmartThings” hub. It was terrible. The UI to configure things was slow and clunky, firmware updates were applied whether you wanted them or not, and everything stopped working if their cloud services stopped. You were also locked into whatever integrations they deigned to support, of course. After that broke for the umpteenth time I scaled back and for years the closest I got to home automation was a couple of Hue bulbs.

Recently I’ve been building it out again, though. This time using off-the-shelf components that interop using Zigbee, open-source software, and some code I wrote myself. It’s great; it runs entirely locally and has had basically zero downtime. The Zigbee ecosystem lets me integrate all sorts of things without having to spend lots of money on “smart” alternatives. I think I’ve spent less on this incarnation than I did on the original SmartThings hub all those years ago (even without adjusting for inflation!).

My current setup

I run everything on a Raspberry Pi 4, with a Sonoff USB Zigbee adapter based on the CC2652P chipset¹. Interfacing with the Zigbee stack is handled by zigbee2mqtt (z2m for short), an open-source project that basically bridges your devices to an MQTT broker². When a device reports some data, it will send a new message over MQTT; when you want to make a device do something you just post a message back. It’s incredibly lightweight, but supports a huge array of devices out of the box. And as it’s just using MQTT, it’s trivial to integrate with other software or build on top of.

I know a lot of people building out this kind of home automation use Home Assistant, but I don’t get on with it terribly well. It felt incredibly sluggish, and the entire project is just a bit… much. I want a binary or package or docker image I can just run, not an entire operating system. That’s not how computers are meant to work! In contrast, z2m is simple to set up, super light weight and responsive.

Anyway. z2m exposes Zigbee devices over MQTT, so I wrote some code in Go to connect to the MQTT broker, and listen to the messages. It’s grown a bit beyond this now, and I’m skipping some boring bits like error handling and JSON parsing, but at first I had something like:

for {
    message, topic, err := c.ReadSlices()
    
    if string(topic) == "zigbee2mqtt/desk-button" {
        if strings.Contains(message, "single") {
            c.Publish(nil, []byte("{\"state\": \"TOGGLE\"}"), "zigbee2mqtt/room-lights/set")
        }
    }
}

I think I actually made this harder to read by trying to simplify it here, but hopefully you can follow that it was relatively straight forward to listen for a particular action to happen (in this case me “single”-pressing on the device called “desk-button”) and then make another device do something in response (toggling the state of the “room-lights” device).

So what actually are these devices? At present in z2m I have the following:

Some generic buttons
An air quality sensor (USB powered), and a separate temperature sensor (battery powered)
A light switch
Some 240V relay modules, that I use to turn non-smart devices on and off
Some USB relay modules, for the same purpose
Some “smart” plugs that I mostly use to monitor power usage
A motorised blind roller

I think all of these are either Tuya or Moes branded, and were all sourced from AliExpress. You can get the same things from Amazon or elsewhere, but they tend to be 3-4x more expensive for the same product.

One of the cool things about Zigbee devices is that the powered ones work together to create a mesh network, so you don’t have to worry about network repeaters or signal strength like you do with Wi-Fi networks. z2m even makes a map showing the connections:

The network map produced by z2m. You can see how all the powered devices form a mesh that the lower power ones can connect to.

Some interesting automations

A Zigbee relay spliced into the power cable for the fan

So what do I actually do with all of this? Some of it is just what I’ll call “laziness automation”: I want to be able to turn on the lights without getting up and walking to the light switch. So there’s a Zigbee button on my desk that does it. Then there are some less manual automations: my blinds are automatically closed at sunset³, for example. It feels a bit trivial, but it’s surprisingly nice just not to have to think about that at all.

Another nice quality of life automation is the light I have above my monitor. It’s USB powered, and I now have it going through a Zigbee USB relay that lets it be toggled on and off. Then I have a small agent running on my desktop that turns the light on when the computer is unlocked, and off when it locks or shuts down. I keep meaning to make a “film mode” that detects when I’m watching a film, and turning all the lights and blinds down, but I haven’t got around to it yet.

The most complex automation is probably for a window fan. It’s not smart in any way, so I cut the power cable and inserted a Zigbee relay. The whole thing is housed in a little project box to keep it secure. The relay basically acts as a switch: the live wire leading to the fan runs to the “normally open”⁴ contact, while the upstream power goes to “common”. When the relay is told to turn the fan on, the two get connected and the fan gets power. Oh, it’s also not actually a window fan, but I designed and 3D printed some adapters so that it sits right in the window.

So now we have a window fan that can be turned off and on automatically. But I don’t want to have to press a button to do that. I’m lazy, remember? Instead, I made it so that the Go code constantly monitors the temperature reported by the air quality sensor, and queries the free OpenWeatherMap API to get the rough temperature outside. It can then turn the fan on if the room is too hot, and outside is cool enough to make a difference (there’s no point in blowing hotter air in!).

A graph of room temperature, showing the effect of the fan being turned on and off

I don’t want it to do that all the time though. The room doesn’t need to be cooled if I’m not around. There are various Zigbee presence sensors you can get, but the cheaper ones seem to be of dubious quality. Instead, I wrote some code to guess whether I’m present. It uses the state of the monitor light as a proxy for “is the computer in use”, and then makes some guesses based on the last time the computer was used and the current time (if I turn the computer off at midnight it probably means I’m going to sleep; if I turn it off at 2pm it probably means I’m going out somewhere).

You can see in the graph that the fan has a decent impact on temperature. I coded it to cool the room to 19 degrees, but then not turn on again until it was above 20. This prevents it flip-flopping on and off constantly. You can clearly see the pattern in the graph, as it actively cools and then slowly the room warms back up. This arrangement is much better than being woken up at 5am because it’s painfully cold. Trust me.

Bonuses: metrics and 3D printer

One of the things my custom Go code does is collate all the various stats reported by the Zigbee devices, and inserts them into a VictoriaMetrics database. I originally hosted this on the Pi itself, and it performed fine, but I’ve since moved it onto a server so that I can use it for some other things as well.

I set up Grafana to point to VM, and can create dashboards showing power usage, what devices are turned on when, and a bunch of environmental conditions. This also makes it easy to spot how good the data coming from the devices are. For example, the air quality sensor reports a figure for the amount of Carbon Dioxide in the air, as well as the amount of Volatile Organic Compounds (VOCs). The graphs are basically identical, but on a different scale. It turns out this particular device has no actual way of detecting CO₂, so it just “calculates” it from the VOCs figure. Useful to know if you want to actually use that data.

Recently I came across a go library for interacting with Bambu Lab printers, so I’ve also hooked that into my automation. It exports metrics about the printer, so I now have a way of seeing what’s going on when I’m not physically present⁵. I even added a HTTP endpoint (exposed over Tailscale) that shows pictures from the built-in camera.

On the automation front, I’ve made it automatically turn off the printer’s light when it finishes a print, and also added push notifications via PushOver whenever the state changes. No longer will I be sat in another room blissfully unaware it ran out of filament seconds after I walked out the door!

Was it worth it?

These days you could probably just buy some kind of ‘smart home’ hub that works well enough, and do most of what I’ve done with a lot less effort and no coding. I’m still of the opinion that for something so essentially local, it should itself be managed entirely locally. I don’t trust companies like Google or Amazon not to kill their products, or change or remove an API I rely on.

Obviously the “Not Invented Here” approach of coding everything yourself doesn’t suit everyone, but as someone who enjoys coding and enjoys having things work just so it works very well for me.

It turns out the chipset is important. I initially used a similar Sonoff dongle that used a CC2531 chipset, and its performance wasn’t great. It often failed to pair with new devices, and dropped links to existing ones. The zigbee2mqtt docs do explicitly advise against the CC2531 chips for that reason. At the time they recommended CC2652Ps, so that’s what I went with. If you’re starting new I’d go with whatever their latest recommendation was. ↩︎
MQTT is basically a network protocol for publishing and subscribing to arbitrary messages. A broker is the thing that sits in the middle and routes the messages. I use Mosquitto but any will do. ↩︎
They originally also re-opened at sunrise but that was a terrible mistake. Who knew the sun rose so early?! ↩︎
“open” meaning “there’s a gap so it doesn’t work” not “open for business”. This confusion in terminology also extends to drawbridges. ↩︎
I use the printer in LAN mode, which means there’s no way to monitor it from a phone, even if you’re connected to the same network still. ↩︎

Debugging beyond the debugger

2019-05-08T00:00:00Z

Real-life debugging tools

Most programming — and sysadmin — problems can be debugged in a fairly straight forward manner using logs, print statements, educated guesses, or an actual debugger. Sometimes, though, the problem is more elusive. There’s a wider box of tricks that can be employed in these cases but I’ve not managed to find a nice overview of them, so here’s mine. I’m mainly focusing on Linux and similar systems, but there tend to be alternatives available for other Operating Systems or VMs if you seek them out.

Networking

tcpdump

tcpdump prints out descriptions of packets on a network interface. You can apply filters to limit which packets are displayed, chose to dump the entire content of the packet, and so forth.

Typical usage might look something like:

# tcpdump -nSi eth0 port 80
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes
16:03:35.577781 IP6 2001:db8::1.54742 > 2001:db8::2.80: Flags [S], seq 2815779044, win 64800, options [mss 1440,sackOK,TS val 2378811665 ecr 0,nop,wscale 7], length 0
16:03:35.586853 IP6 2001:db8::2.80 > 2001:db8::1.54742: Flags [S.], seq 1522609102, ack 2815779045, win 28560, options [mss 1440,sackOK,TS val 3063610173 ecr 2378811665,nop,wscale 7], length 0
16:03:35.586877 IP6 2001:db8::1.54742 > 2001:db8::2.80: Flags [.], ack 1522609103, win 507, options [nop,nop,TS val 2378811674 ecr 3063610173], length 0
16:03:35.620678 IP6 2001:db8::1.54742 > 2001:db8::2.80: Flags [P.], seq 2815779045:2815779399, ack 1522609103, win 507, options [nop,nop,TS val 2378811708 ecr 3063610173], length 354: HTTP: GET / HTTP/1.1

Here you can see the start of a plaintext HTTP request: the three-way handshake as the TCP connection is established followed by a GET request. Even if the data is encrypted as it will be in most cases, it’s often useful to see the “shape” of the transmissions: did the client start sending data when it connected, did the server ever respond, etc.

Daniel Miessler has a good tutorial on tcpdump if you’re not familiar with it and don’t want to jump straight into the man page.

… with Docker

Docker sets up separate network namespaces for each container. To see the traffic across the interfaces of a single container you can nsenter the container’s network namespace:

# nsenter -t $(docker inspect --format '{{.State.Pid}}' my_container) -n tcpdump -nS port 80

This retrieves the PID for the container, and tells nsenter to enter the network (-n) namespace from the given target (-t) PID, and then run the given command (in this case tcpdump ...).

openssl s_client / s_server

When a connection is using TLS it’s often useful to try connecting to the server and see what certificate it presents, algorithms it negotiates, and so forth. OpenSSL offers two useful subcommands which can help with this: s_client for connecting as a client, and s_server for listening to connections.

For example, using s_client to connect to google.com on the standard HTTPS port shows us details about the server cert and its verification status:

$ openssl s_client -connect google.com:443
CONNECTED(00000003)
depth=2 OU = GlobalSign Root CA - R2, O = GlobalSign, CN = GlobalSign
verify return:1
depth=1 C = US, O = Google Trust Services, CN = Google Internet Authority G3
verify return:1
depth=0 C = US, ST = California, L = Mountain View, O = Google LLC, CN = *.google.com
verify return:1
---
Certificate chain
 0 s:C = US, ST = California, L = Mountain View, O = Google LLC, CN = *.google.com
   i:C = US, O = Google Trust Services, CN = Google Internet Authority G3
 1 s:C = US, O = Google Trust Services, CN = Google Internet Authority G3
   i:OU = GlobalSign Root CA - R2, O = GlobalSign, CN = GlobalSign
---
# ...

Whereas connecting to my webserver and providing an unknown host in the SNI field results in an SSL alert 112 (“The server name sent was not recognized”) and no server certificate is sent:

$ openssl s_client -connect chameth.com:443 -servername example.com
CONNECTED(00000003)
140384831313024:error:14094458:SSL routines:ssl3_read_bytes:tlsv1 unrecognized name:../ssl/record/rec_layer_s3.c:1536:SSL alert number 112
---
no peer certificate available
---
# ...

Often if you hit this kind of alert in an application the exact error will be lost somewhere in the many layers between the SSL library and the logs, so being able to directly connect and test can help diagnose a lot of issues.

Once a connection is established you can read and write plain text and it will be encrypted and decrypted automatically.

Java apps

If a Java app is involved in the connection, you can enable a lot of built-in debugging with a simple JVM property: javax.net.debug. You can tweak what exactly gets logged, but the easiest thing to do is just set the property to all and you’ll see information about certificate chains, verification, and packet dumps:

$ java -Djavax.net.debug=all -jar ....
# ...
found key for : duke
chain [0] = [
[
  Version: V1
  Subject: CN=Duke, OU=Java Software, O="Sun Microsystems, Inc.",
  L=Cupertino, ST=CA, C=US
# ...

More information about Java’s debugging options is available on docs.oracle.com.

Thread and core dumps

Higher-level languages frequently provide an interactive way to dump the current execution state of all of their threads (a “thread dump”). This is useful to spot deadlocks, some types of race conditions, and as a quick and dirty method of investigating hangs or excessive CPU usage.

With both Java and Go applications you can send a QUIT signal to have a thread dump printed out; Go applications will quit after doing so, Java ones will carry on running. At most terminals you can hit Ctrl and \ to send a QUIT signal.

For Java you can also use the jstack tool from the JDK to dump threads by PID; this can be useful if the application is running in the background or has redirected sysout:

$ jstack 8321
Attaching to process ID 8321, please wait...
Debugger attached successfully.
Client compiler detected.

Thread t@5: (state = BLOCKED)
 - java.lang.Object.wait(long) @bci=-1107318896 (Interpreted frame)
 - java.lang.Object.wait(long) @bci=0 (Interpreted frame)
 - java.lang.ref.ReferenceQueue.remove(long) @bci=44, line=116 (Interpreted frame)
 - java.lang.ref.ReferenceQueue.remove() @bci=2, line=132 (Interpreted frame)
 - java.lang.ref.Finalizer$FinalizerThread.run() @bci=3, line=159 (Interpreted frame)

# ...

A core dump provides more complete information about the state of a process, but is often more complex to interpret. The gcore utility from GDB will create a core dump of a process with a given PID. You can then generally load the core file using your normal debugger, depending on the language in question.

System calls

strace is the swiss army knife for seeing what a process is doing. It details each system call made by a program (you can filter them down, of course). For example:

$ strace -e read curl https://google.com/
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \236\0\0\0\0\0\0"..., 832) = 832
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P!\0\0\0\0\0\0"..., 832) = 832
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200l\2\0\0\0\0\0"..., 832) = 832
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20Q\0\0\0\0\0\0"..., 832) = 832
# ...
read(3, "\0\0\0\0\0\0\0\4\25\345\366\302\273sE6\365wI\225\321|\3435Z\362\216\372\215\251aO"..., 253) = 253
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="https://www.google.com/">here</A>.
</BODY></HTML>
read(3, "\27\3\3\0!", 5)                = 5
# ...

Brendan Gregg has a nice guide on strace and alternatives.

… with docker

When the application is running in docker you can usually just strace it from the host with the correct PID (from e.g. docker inspect --format '{{.State.Pid}}' my_container). Sometimes you may need to trace the startup of an application though, which is a bit trickier. Instead you can run a new container using the same PID namespace as your target, and the permissions needed to strace:

$ docker run --rm -it --pid=container:my_container \
  --net=container:my_container \
  --cap-add sys_admin \
  --cap-add sys_ptrace \
  alpine

From within the new container you can install strace, and trace any running program within the target container using strace -p as normal. To start a new program you need access to the target container’s filesystem, which you can get to via /proc/1/root (PID 1 being the main process that docker started in the target container).

Files

Sometimes the problem might relate to file access. There are a couple of straight forward — but nonetheless useful — tools which might help here. inotifywait uses the Linux inotify subsystem to watch files or directories for operations. For example:

$ inotifywait -mr site/content
Setting up watches.  Beware: since -r was given, this may take a while!
Watches established.
site/content/post/ MODIFY 2019-05-08-debugging-beyond-the-debugger.md
site/content/post/ OPEN 2019-05-08-debugging-beyond-the-debugger.md
site/content/post/ MODIFY 2019-05-08-debugging-beyond-the-debugger.md
site/content/post/ MODIFY 2019-05-08-debugging-beyond-the-debugger.md
site/content/post/ CLOSE_WRITE,CLOSE 2019-05-08-debugging-beyond-the-debugger.md
# ...

Here the -m switch makes inotifywait monitor the files forever (instead of exiting on the first modification, which is the normal behaviour) and r makes it recurse into the directory and monitor each file and subdirectory in there.

If you want to see what processes currently have a file open, fuser is the go-to tool. For example:

$ fuser -v /
                     USER PID ACCESS COMMAND
/:                   root     kernel mount /
                     chris      2961 .rc.. systemd
                     chris      2986 .r... gdm-x-session
                     chris      2994 .r... dbus-daemon
                     chris      3001 .r... gnome-session-b
# ...

Honourable mentions

These aren’t really debugging tools, but I feel it’s worth mentioning as they often feature somewhere along the debugging-of-weird-problems journey.

I’ve seen some weird and wonderful problems happen because a disk is full, so a quick df early on in the debugging process never hurts. Some apps may hang, some may corrupt their config, some may fall over and die; sometimes the manner in which they fail doesn’t obviously point to a disk space issue.

Another issue that comes up now and then — especially inside VMs or other environment that don’t have a decent amount of “noise” happening — is entropy exhaustion. A quick look at /proc/sys/kernel/random/entropy_avail should be enough to confirm that everything is ticking along nicely. If it’s exceedingly low then you may find that anything involving random number generation stalls (TLS connections for example).

Monitoring power draw with WeMo Insight Switches

2016-05-02T00:00:00Z

A WeMo Insight Switch

I recently picked up a couple of Belkin’s WeMo Insight Switches to monitor power usage for my PC and networking equipment. WeMo is Belkin’s home automation brand, and the switches allow you to toggle power on and off with an app, and monitor power usage.

The WeMo Android app is pretty dismal. It’s slow, doesn’t look great, and crashed about a dozen times during the setup process for each of my two switches. It also doesn’t provide much information at all about power: you can see average power draw and current power draw, and that’s basically it.

Belkin has provided an option to e-mail yourself a spreadsheet with historical power data, and can even do it on a regularly scheduled basis, but that’s not really a nice solution if you want up-to-date power stats. Even if you were happy with data arriving in batch, having to get hold of an e-mail attachment and parse out a weirdly formatted spreadsheet doesn’t make for easy automation. It also relies on Belkin supporting the service indefinitely, which isn’t necessarily going to happen.

Enter the SOAP API

Fortunately, the devices themselves expose an API to get the data. Once a switch is setup with the WeMo app, it connects to a WiFi network. You can discover WeMo devices on the network using a UPnP broadcast, and then from there a list of supported services. Each service has a number of SOAP actions, with nice obvious names, and parameters documented in the XML service description.

For the insight switches, there’s a service at /upnp/control/insight1 which has a number of actions including GetPower and GetTodayKWH. Sending a SOAP request isn’t too difficult (albeit nowhere near as nice as a REST JSON API) — here’s a sample request I made using the DHC chrome extension:

POST /upnp/control/insight1 HTTP/1.1
Accept: */*
Accept-Encoding: gzip, deflate
Accept-Language: en-GB,en;q=0.8
Content-Type: text/xml
Origin: chrome-extension://aejoelaoggembcahagimdiliamlcdmfm
SOAPACTION: "urn:Belkin:service:insight:1#GetPower"
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/51.0.2704.29 Safari/537.36

<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
    <s:Body>
        <u:GetPower xmlns:u="urn:Belkin:service:insight:1"/>
    </s:Body>
</s:Envelope>

The name of the action (in the SOAPACTION header) and the XML namespace in the body are both constructed from information in the service definition. The result that comes back is:

<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
    <s:Body>
        <u:GetPowerResponse xmlns:u="urn:Belkin:service:insight:1">
            <InstantPower>92170</InstantPower>
        </u:GetPowerResponse>
    </s:Body>
</s:Envelope>

The current power draw in milliwatts is returned in the <InstantPower> argument.

Putting the data to work

So now we have a way to pull the current power draw, a nice thing to do would be to plot a graph of it to see the variation over time. This is the short of thing you’d expect to see in the Belkin app, but it’s sadly missing. After a bit of research I settled on the tried and true rrdtool to store data and generate graphs. I created a new database to store the values from the two switches:

rrdtool create power.rrd \
    --start now \
    --step 60 \
    DS:wemoComputer:GAUGE:120:U:U \
    DS:wemoNetworking:GAUGE:120:U:U \
    RRA:AVERAGE:0.5:1:1440 \
    RRA:AVERAGE:0.5:10:1008 \
    RRA:AVERAGE:0.5:30:1488 \
    RRA:AVERAGE:0.5:120:1488 \
    RRA:AVERAGE:0.5:360:1488 \
    RRA:AVERAGE:0.5:1440:36500

This creates a database file which expects values to be given every 60 seconds for two data series: ‘wemoComputer’ and ‘wemoNetworking’. These are gauge types (i.e., a value we read off a gauge, rather than a counter that keeps going up) with no minimum and maximum (‘U’).

It then defines a series of round-robin archives. Each of these stores a fixed number of entries, and the oldest is overwritten when they become full. The interesting arguments are the step count (second to last) and number of samples (last argument). The first one takes every sample and keeps 1,440 of them (i.e., a full day at 1-minute resolution); the last one has a step of 1,440 and keeps 36500 of them (i.e., 100 years at 1-day resolution). The use of RRAs ensures that rrdtool can retain enough data to create historical graphs, while providing a fixed, finite maximum file size. With sufficient RRA coverage you can graph most timescales and have data available at a reasonable resolution.

Next, I created a small python script to retrieve the power using SOAP:

#!/usr/bin/python3

import requests
from xml.etree import ElementTree

def get_power(ip_and_port):
    headers = {'Content-type': 'text/xml', 'SOAPACTION': '"urn:Belkin:service:insight:1#GetPower"'}
    payload = '''<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
                             s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
                  <s:Body>
                   <u:GetPower xmlns:u="urn:Belkin:service:insight:1"/>
                  </s:Body>
                 </s:Envelope>'''
    r = requests.post("http://%s/upnp/control/insight1" % ip_and_port, headers=headers, data=payload)
    et = ElementTree.fromstring(r.text)
    return et.find('.//InstantPower').text

I then have a dictionary of IP addresses to data series names, and the script polls each one in turn and then executes an rrdtool update query to add the items to the database. I have this script running every minute via cron.

After leaving the script to run for a bit and gather data, it’s time to make some graphs. I use the following to create a graph with a background gradient:

rrdtool graph desk-1d.png \
        -o -X0 -w800 -h500 \
        -u 2000 -l 20 -r \
        DEF:raw=power.rrd:wemoComputer:AVERAGE \
        CDEF:power=raw,1000,/ \
        CDEF:powerz=power,2000,LT,power,2000,IF CDEF:powerzNoUnk=power,UN,0,powerz,IF AREA:powerzNoUnk#ff0000 \
        CDEF:powery=power,1500,LT,power,1500,IF CDEF:poweryNoUnk=power,UN,0,powery,IF AREA:poweryNoUnk#ff0000 \
        CDEF:powerx=power,1000,LT,power,1000,IF CDEF:powerxNoUnk=power,UN,0,powerx,IF AREA:powerxNoUnk#ff0000 \
        CDEF:powerw=power,900,LT,power,900,IF CDEF:powerwNoUnk=power,UN,0,powerw,IF AREA:powerwNoUnk#ff0000 \
        CDEF:powerv=power,800,LT,power,800,IF CDEF:powervNoUnk=power,UN,0,powerv,IF AREA:powervNoUnk#ff1b00 \
        CDEF:poweru=power,700,LT,power,700,IF CDEF:poweruNoUnk=power,UN,0,poweru,IF AREA:poweruNoUnk#ff4100 \
        CDEF:powert=power,600,LT,power,600,IF CDEF:powertNoUnk=power,UN,0,powert,IF AREA:powertNoUnk#ff6600 \
        CDEF:powers=power,400,LT,power,400,IF CDEF:powersNoUnk=power,UN,0,powers,IF AREA:powersNoUnk#ff8e00 \
        CDEF:powerr=power,200,LT,power,200,IF CDEF:powerrNoUnk=power,UN,0,powerr,IF AREA:powerrNoUnk#ffb500 \
        CDEF:powerq=power,180,LT,power,180,IF CDEF:powerqNoUnk=power,UN,0,powerq,IF AREA:powerqNoUnk#ffdb00 \
        CDEF:powerp=power,160,LT,power,160,IF CDEF:powerpNoUnk=power,UN,0,powerp,IF AREA:powerpNoUnk#fdff00 \
        CDEF:powero=power,140,LT,power,140,IF CDEF:poweroNoUnk=power,UN,0,powero,IF AREA:poweroNoUnk#d7ff00 \
        CDEF:powern=power,120,LT,power,120,IF CDEF:powernNoUnk=power,UN,0,powern,IF AREA:powernNoUnk#b0ff00 \
        CDEF:powerm=power,100,LT,power,100,IF CDEF:powermNoUnk=power,UN,0,powerm,IF AREA:powermNoUnk#8aff00 \
        CDEF:powerl=power,90,LT,power,90,IF CDEF:powerlNoUnk=power,UN,0,powerl,IF AREA:powerlNoUnk#65ff00 \
        CDEF:powerk=power,80,LT,power,80,IF CDEF:powerkNoUnk=power,UN,0,powerk,IF AREA:powerkNoUnk#3eff00 \
        CDEF:powerj=power,70,LT,power,70,IF CDEF:powerjNoUnk=power,UN,0,powerj,IF AREA:powerjNoUnk#17ff00 \
        CDEF:poweri=power,60,LT,power,60,IF CDEF:poweriNoUnk=power,UN,0,poweri,IF AREA:poweriNoUnk#00ff10 \
        CDEF:powerh=power,50,LT,power,50,IF CDEF:powerhNoUnk=power,UN,0,powerh,IF AREA:powerhNoUnk#00ff36 \
        CDEF:powerg=power,40,LT,power,40,IF CDEF:powergNoUnk=power,UN,0,powerg,IF AREA:powergNoUnk#00ff5c \
        CDEF:powerf=power,30,LT,power,30,IF CDEF:powerfNoUnk=power,UN,0,powerf,IF AREA:powerfNoUnk#00ff83 \
        CDEF:powere=power,20,LT,power,20,IF CDEF:powereNoUnk=power,UN,0,powere,IF AREA:powereNoUnk#00ffa8 \
        CDEF:powerd=power,0,LT,power,0,IF CDEF:powerdNoUnk=power,UN,0,powerd,IF AREA:powerdNoUnk#00ffd0 \
        LINE:power#080

This seems a bit unweildy, but it’s fairly straight forward. The options tell rrdtool to create a graph with a canvas size of 800x500 pixels, a lower limit of 20W, upper limit of 2kW, and a log scale. The first CDEF divides our raw value (which was in millwatts) by 1000 to get a value in watts. rrdtool uses reverse polish notation like some calculators, so you provide the arguments before the operator.

The big block of CDEF/CDEF/AREA parameters creates a series of area plots in different colours according to the power level. They’re in descending order so the smaller areas are drawn on top of the larger layers. This results in a graph that looks like this:

Graph of power usage over a day

This graph shows the total power for all the things plugged in at my desk. You can see the idle power draw is around 60W. When I’m using the computer it jumps up to around 130W, and when the computer is under heavy load (playing games, for example) it goes up even further to the 200W mark. With a couple of small tweaks to the rrdtool command, I also have a graph showing the entire week:

Graph of power usage over a week

The two huge spikes near the start of the data are caused by a heater under my desk. They’re also one of the main reasons I chose to plot the graphs with a logarithmic scale. With a linear scale between 20W and 2kW, the graph would be completely dominated by these large spikes — in fact the difference in height between the two spikes would take almost half the graph! The relative difference between the normal values of 60-200W and the heater’s value of 1.8kW isn’t actually that interesting, and certainly not worth using about 80% of the graph to demonstrate. The log scale helps to compress this, and emphasises the difference in the smaller values more.

Reverse engineering the Sense API

2016-04-10T00:00:00Z

A Sense unit and its two pillow sensors

Sense is a little device that sits by your bedside and, in conjunction with a little ‘pill’ attached to your pillow, monitors your sleeping patterns and any environmental conditions that might hamper them. Android and iOS apps show you your sleep history, and offer suggestions for improvements.

Sense was Kickstarted in August 2014, raising over 2.4 million US dollars, and shipped to backers in mid 2015. The campaign blurb included this snippet:

Building with Sense

You’ll always have access to your data via our API. Take it, play with it, graph it, do whatever you want with it. It’s yours. That’s important to us.

We enjoy tinkering with and building on-top of other products we like. Sense will let you have that experience.

We’d love to hear your thoughts on what you might want to build with Sense, and how you could directly interact with the hardware, and the data it collects.

Sounds great! But a year after shipping, there’s no sign of an API, and some of us who enjoy tinkering are getting a bit restless…

Reverse engineering to the rescue

Data from the Sense hardware is transmitted off onto the Internet somewhere, and then pulled down by the mobile apps. If we can snoop that traffic, we can probably figure out how to grab the data from the Sense.

So the first step is to capture the raw network traffic while the Sense and the app are in use. I crafted an extremely over-the-top setup that involves my phone and the Sense being on a new, separate wireless network that gateways through a Linux server that can look in on all the traffic (because you never know when a dedicated capturing network will come in handy, right?…)

Running tshark while the app and device are active showed they were making HTTPS requests an Amazon Elastic Cloud instance. That’s not really much use, as we can’t see the content of the requests. The next step is to move up the network stack and target the HTTPS traffic specifically. Step in, mitmproxy. This automates man-in-the-middle attacks on HTTPS requests. When it receives such a request, it cooks up its own certificate and sends that to the client, and then sits in between while the client and the server communicate.

The certificates generated by mitmproxy aren’t issued by a trusted source, so (well behaved) browsers and apps will throw up lots of warnings and refuse to communicate with it for the most part. This is the mechanism that stops anyone impersonating your banking website when you access it over HTTPS, so is generally a very good thing. In this case, both the Sense itself and the Android app refused to talk with the blatant attacker.

We control the Android phone, though, so can just tell it that we trust the dodgy certificate issuer. This involves grabbing the certificate generated by mitmproxy, and adding it to Android’s key store. The process is documented nicely in the mitmproxy docs and is pretty straightforward. With Android trusting our certificate authority, the Sense app starts talking through the proxy and we can look at the plain HTTP requests.

The API

Logging in to the Android app and navigating through the various screens shows that the API is actually pretty nice. It’s RESTful, and uses an OAuth bearer token for authorisation, as you can see in the mitmproxy output of the authentication and first few requests:

POST https://api.hello.is/v1/oauth2/token
    ← 200 application/json 151B 1.17s
GET https://api.hello.is/v2/account/preferences
    ← 200 application/json 124B 109ms
GET https://api.hello.is/v1/account
    ← 200 application/json 181B 388ms
GET https://api.hello.is/v2/devices
    ← 200 application/json 235B 126ms
POST https://api.hello.is/v1/app/checkin
    ← 200 application/json 106B 119ms
GET https://api.hello.is/v2/insights
    ← 200 application/json 1.4kB 157ms
POST https://api.hello.is/v1/notifications/registration
    ← 204 [no content] 364ms
GET https://api.hello.is/v2/timeline/2016-04-09
    ← 200 application/json 160B 550ms
GET https://api.hello.is/v1/questions?date=2016-04-10
    ← 200 application/json 284B 132ms
PATCH https://api.hello.is/v1/app/stats
    ← 202 [no content] 126ms
GET https://api.hello.is/v1/app/stats/unread
    ← 200 application/json 71B 171ms

Authorisation

To get a bearer token, you send a POST request to /v1/oauth2/token, supplying the username and password, and a client ID and secret. Presumably if the API is ever opened up you’ll be able to register clients and get your own ID and secret, but for now reusing the ones from the Android app works fine. [I’ve prettified and linewrapped the content to make it a bit easier to read.]

POST /v1/oauth2/token HTTP/1.1
Host: api.hello.is
Accept: */*
Content-Length: 123
Content-Type: application/x-www-form-urlencoded

grant_type=password
 &client_id=8d3c1664-05ae-47e4-bcdb-477489590aa4
 &client_secret=4f771f6f-5c10-4104-bbc6-3333f5b11bf9
 &username=USERNAME
 &password=PASSWORD

HTTP/1.1 200 OK
Cache-Control: no-cache
Content-Type: application/json
Date: Sun, 10 Apr 2016 17:25:16 GMT
transfer-encoding: chunked
Connection: keep-alive

{
  "token_type":"Bearer",
  "expires_in":31536000,
  "account_id":"1234",
  "access_token":"2.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
  "refresh_token":"2.yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy"
}

Sleep timeline

Getting the timeline for one night is just a straight up GET request. It gives a detailed log of events, including different ‘depths’ of sleep (I’ve cut out a whole bunch here for simplicity). It also shows metrics relating to the entire night, and their condition (‘warning’ or ‘ideal’).

GET /v2/timeline/2016-04-08 HTTP/1.1
Host: api.hello.is
Accept: */*
Authorization: Bearer 2.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

HTTP/1.1 200 OK
Cache-Control: no-cache
Content-Type: application/json
Date: Sun, 10 Apr 2016 17:29:00 GMT
transfer-encoding: chunked
Connection: keep-alive

{
  "score":76,
  "score_condition":"WARNING",
  "message":"You were asleep for **8.2 hours**, and sleeping soundly for 3.2 hours.",
  "date":"2016-04-08",
  "events":[
    {
      "timestamp":1460168700000,
      "timezone_offset":3600000,
      "duration_millis":60000,
      "message":"You went to bed.",
      "sleep_depth":0,
      "sleep_state":"AWAKE",
      "event_type":"GOT_IN_BED",
      "valid_actions":["ADJUST_TIME","VERIFY","INCORRECT"]
    },{
      "timestamp":1460169600000,
      "timezone_offset":3600000,
      "duration_millis":60000,
      "message":"You fell asleep.",
      "sleep_depth":100,
      "sleep_state":"SOUND",
      "event_type":"FELL_ASLEEP",
      "valid_actions":["ADJUST_TIME","VERIFY","INCORRECT"]
    },{
      "timestamp":1460177040000,
      "timezone_offset":3600000,
      "duration_millis":60000,
      "message":"You were moving around quite a bit.",
      "sleep_depth":2,
      "sleep_state":"AWAKE",
      "event_type":"GENERIC_MOTION",
      "valid_actions":["VERIFY","INCORRECT"]
    },{
      "timestamp":1460199000000,
      "timezone_offset":3600000,
      "duration_millis":60000,
      "message":"Good morning.",
      "sleep_depth":0,
      "sleep_state":"AWAKE",
      "event_type":"WOKE_UP",
      "valid_actions":["ADJUST_TIME","VERIFY","INCORRECT"]
    }
  ],
  "metrics":[
    { "name":"total_sleep", "value":490, "unit":"MINUTES", "condition":"IDEAL" },
    { "name":"sound_sleep", "value":190, "unit":"MINUTES", "condition":"IDEAL" },
    { "name":"time_to_sleep", "value":15, "unit":"MINUTES", "condition":"IDEAL" },
    { "name":"times_awake", "value":2, "unit":"QUANTITY", "condition":"IDEAL" },
    { "name":"fell_asleep", "value":1460169600000, "unit":"TIMESTAMP", "condition":"IDEAL" },
    { "name":"woke_up", "value":1460199000000, "unit":"TIMESTAMP", "condition":"IDEAL" },
    { "name":"temperature", "value":null, "unit":"CONDITION", "condition":"IDEAL" },
    { "name":"humidity", "value":null, "unit":"CONDITION", "condition":"IDEAL" },
    { "name":"particulates", "value":null, "unit":"CONDITION", "condition":"WARNING" },
    { "name":"light", "value":null, "unit":"CONDITION", "condition":"IDEAL" },
    { "name":"sound", "value":null, "unit":"CONDITION", "condition":"IDEAL"}
  ]
}

Other interesting resources

Pretty much everything displayed in the app is available as a REST resource. They clearly put some thought into API design, which makes it even more of a shame that they haven’t made it public yet. Some of the other interesting resources are:

/v1/alarms: the alarms set on the Sense.
/v1/room/current?temp_unit=c: gives the latest environmental readouts from the Sense.
/v1/room/all_sensors/hours?quantity=2&from_utc=<timestamp>: sensor history.
/v2/devices: the paired devices, including battery status of pills.
/v2/insights: JSON representation of the cards displayed on the main screen (recommendations, analysis, etc).
/v2/trends/LAST_WEEK (or MONTH or 3_MONTHS): gives graph data for sleep scores, duration and depths.

Now the API is figured out, all that’s left is to build something that uses it…