Chameth.com - posts like dns-over-tls-on-edgerouter-lite, travel-toolkit, why-you-should-be-using-https but not docker-automatic-nginx-proxy

Building a travel toolkit

2025-01-02T00:00:00Z

The container for my toolkit, a UGREEN “travel accessories” bag

For a while now, whenever I’ve traveled anywhere I’ve dumped a selection of tools into my backpack just in case I need them. Originally this was mostly focused around being able to open and fix my laptop if anything went wrong, but over time has slowly expanded to include other useful tools.

Repeatedly packing these tools and then returning them to where they belonged was tedious, though. I couldn’t just leave them in the backpack as I often needed them for non-travelling purposes, and I didn’t want to just buy duplicate tools that spent most of their life a few meters away from each other, so I ignored the problem and just dealt with the tedium.

Eventually I acquired enough tools that — while not quite duplicates — I wouldn’t miss often if they were kept in the backpack. Building on these I’ve created a little travel toolkit that contains everything I might want (and more) while away.

The base

The biggest challenge I had before was finding a screwdriver set. I have an iFixit Mako set that did the in-and-out-of-the-bag routine for several years. Nothing else covered the range of drivers I wanted for generic electronic tinkering and more chunky work. I finally found one in the form of a Wera Tool-Check PLUS TR-Edition. “TR” stands for “Tool Rebel” and is Wera’s “fan club” brand. Its signature features over the normal Tool-Check PLUS are a fancy fabric case and a 152mm bit extender; but it also comes with a much different set of bits, which is why I picked it up.

Here’s a comparison

Type	Standard version	Tool Rebel edition
Phillips	2x PH1 3x PH2 1x PH3	1x PH00 1x PH0 1x PH1 1x PH2 1x PH3
Pozidrive	None	1x PZ1 3x PZ2
Slotted	1x 5.5mm	1x 4mm 1x 4.5mm 2x 5.5mm 1x 6.5mm
Torx	1x T10 1x T15 1x T20 1x T25 1x T30 1x T40	1x T10 1x T15 1x T20 1x T25 1x T30 1x T40
Security Torx	1x T10 1x T15 1x T20 1x T25 1x T30	1x T25
Hex	1x H3 1x H4 1x H5 1x H6 1x H8	1x H1.5 1x H2 1x H2.5 1x H3 1x H4 1x H6 1x H8

There are only five bits present in the standard version that are missing in the TR edition: 5mm hex (pretty uncommon) and four sizes of security torx (rare). In exchange for those and the removal of a bunch of duplicates, you get two extra phillips sizes (0 and 00, both very useful for electronics and spectacles), some pozidrive bits (extremely common on random hardware/furniture/etc), smaller hex bits (for electronics, 3D printers, and so on), and a few other bits and pieces.

Overall it’s a vastly superior selection for my needs. And while it doesn’t have the full range of bits provided by the iFixit kit, it does cover almost everything I’m ever actually likely to need while travelling, and it’s probably around a third of the size.

The other core part of the toolkit is the bag. I had a UGREEN “travel accessory” bag hanging around unused, and noticed it was almost the exact right size for the Tool-Check. Now, how many other tools could I stuff in there?

All the tools

The array of tools that make up the travel toolkit

The kit can be broken down into a few sections:

Screwdriving

The aforementioned Wera Tool-Check
Its 152mm bit extender

I’ve talked enough about this already, I think, so I’ll spare you any additional commentary on screwdrivers and bits.

Splitting, gripping and cutting

Engineer tweezers
Engineer mini snips
Engineer mini screw removal pliers
Knipex mini waterpump pliers
Two iFixit spudgers (one metal, one plastic)
iFixit jimmy

I have bigger or slightly different versions of these that stay in my normal toolkit. The tweezers and snips are useful in a variety of situations, and the spudgers are handy for getting inside laptops and other devices. The pliers are less useful, but they’re one of those things where when you do need them there aren’t any good alternatives.

Sewing

Two needles
Some black thread
Set of mini clips

You never know when you’re going to rip a seam in something. I find the clips a lot less fiddly than using pins for keeping material in place when I’m trying to sew.

Computering

Retractable ethernet cable
RJ45 coupler
USB-C to RJ45 adapter
Dual USB-A and USB-C thumb drive, with an Arch ISO on it

Sometimes Wi-Fi just doesn’t cut it, or you need to fiddle with a router that doesn’t expose its admin UI over Wi-Fi. The USB-C adapter is for use with my phone, as it’s often easier to move that get the laptop where it needs to be.

I can boot from the thumb drive into an Arch environment, and from there reinstall my laptop from scratch if needed. There’s enough space left over so it can be used to transfer files as well.

Miscellaneousing

Fabric tape measure
Spirit level
Sharpie
Superglue
Spare batteries: 2 CR2032s, 2 AA, 2 AAA

I’m almost certain I won’t use the spirit level, but it’s tiny and I had a spare so it went in. Everything else is just in the “generally handy to have” category.

Putting it all together

The nicely-organised side of the toolkit

The Tool-Check PLUS fits almost perfectly into one side of the UGREEN bag, leaving a little wiggle room along the side for the longer parts like spudgers. The middle pockets can’t fit much in, but keep the batteries and sewing bits out of the way. Everything else is in a big zip-up compartment in the other side, which is slightly messy but still easy enough to dig through to find whatever I need.

The complete kit weighs in at around 1.2KG, so it’s not exactly lightweight, but it goes in a bag with a heavy laptop and all of its peripherals so it’s not as noticeable as it might otherwise be.

It remains to be seen how much use I’ll actually get out of any of this. Maybe I’ll put a bit of paper in so that I can track how often I use each tool…

DNS-over-TLS on the EdgeRouter Lite

2017-12-17T00:00:00Z

An EdgeRouter Lite

DNS-over-TLS is a fairly recent specification described in RFC7858, which enables DNS clients to communicate with servers over a TLS (encrypted) connection instead of requests and responses being sent in plain text. I won’t ramble on about why it’s a good thing that your ISP, government, or neighbour can’t see your DNS requests…

I use an EdgeRouter Lite from Ubiquiti Networks at home, and recently configured it to use DNS-over-TLS for all DNS queries. Here’s how I did it.

Installing unbound

Out of the box, the ERL uses dnsmasq to service DNS requests from local clients. To get DNS-over-TLS support I switched to using Unbound, an open source DNS resolver with support for many modern features such as DNSSEC and DNS-over-TLS.

Installing unbound on the ERL is a simple case of SSHing in, and then:

sudo apt-get update
sudo apt-get install unbound

And then configuring the ERL to use the new local resolver for DNS requests, turn off dnsmasq, and tell DHCP clients to send DNS requests to it (obviously substituting network names and subnets as appropriate):

set system name-server 127.0.0.1
set service dhcp-server shared-network-name lan1 subnet 192.168.1.0/24 dns-server 192.168.1.1
set service dhcp-server use-dnsmasq disable
set service dns

At this point DNS should still work, but Unbound will still be sending requests out in plaintext.

Configuration

The unbound configuration lives in /etc/unbound/unbound.conf, here’s a basic example that I use to enable DNS-over-TLS:

# Unbound configuration file for Debian.
#
# See the unbound.conf(5) man page.
#
# See /usr/share/doc/unbound/examples/unbound.conf for a commented
# reference config file.

server:
    auto-trust-anchor-file: "/var/lib/unbound/root.key"
    verbosity: 1
    interface: 0.0.0.0
    interface: ::0
    port: 53
    do-ip4: yes
    do-ip6: yes
    do-udp: yes
    do-tcp: yes
    access-control: 192.168.0.0/16 allow
    access-control: 127.0.0.0/8 allow
    access-control: 10.0.0.0/8 allow
    root-hints: "/var/lib/unbound/root.hints"

    hide-identity: yes
    hide-version: yes
    harden-glue: yes
    harden-dnssec-stripped: yes

    cache-min-ttl: 900
    cache-max-ttl: 14400
    prefetch: yes
    rrset-roundrobin: yes
    ssl-upstream: yes
    use-caps-for-id: yes

    private-address: 192.168.0.0/16
    private-address: 172.16.0.0/12
    private-address: 10.0.0.0/8

    logfile: "/var/lib/unbound/unbound.log"
    verbosity: 0
    val-log-level: 3

forward-zone:
    name: "."
    forward-addr: 9.9.9.9@853

Notice the server directive ssl-upstream, and that the forward zone specifies the quad9 resolver on its TLS port (853).

DNSSEC

To enable Unbound to validate DNSSEC signatures, we need to provide it with some information about the root nameservers that we trust. First, download the list of root nameservers to the root-hints file specified in the unbound config:

wget ftp://FTP.INTERNIC.NET/domain/named.cache -O /var/lib/unbound/root.hints

Then we need to add the root keys to the auto-trust-anchor-file. The trust anchor at the time of writing is below, but you can get the latest values from the IANA.

.       172800  IN      DNSKEY  257 3 8 AwEAAaz/tAm8yTn4Mfeh5eyI96WSVexTBAvkMgJzkKTOiW1vkIbzxeF3+/4RgWOq7HrxRixHlFlExOLAJr5emLvN7SWXgnLh4+B5xQlNVz8Og8kvArMtNROxVQu
.       172800  IN      DNSKEY  257 3 8 AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjFFVQUTf6v58fLjwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoXbfDaUeVPQuY

Redirecting unencrypted requests

I have a slew of devices on my network that, over time, I have configured to use 8.8.8.8 as a DNS server. They’re not going to care about the DHCP reply, and I don’t really feel like going around checking every weird and wonderful internet-connected device in the house, so I decided to just intercept requests to 8.8.8.8 and send them to Unbound. A simple NAT rule does the trick:

set service nat rule 1 description "HonestDNS Redirect"
set service nat rule 1 destination address 8.8.8.8
set service nat rule 1 destination port 53
set service nat rule 1 inbound-interface eth0
set service nat rule 1 inside-address address 192.168.1.1
set service nat rule 1 inside-address port 53
set service nat rule 1 log disable
set service nat rule 1 protocol tcp_udp
set service nat rule 1 type destination

You could of course redirect any traffic to port 53, but that would prevent you from explicitly querying any other DNS server. By just intercepting traffic to 8.8.8.8 I’m taking care of the vast majority of my statically configured devices, and can still issue manual queries to other resolvers when needed.

Validating

To check that everything is working, you can use tcpdump on the router to inspect packets on the WAN interface directed at port 53:

sudo tcpdump -Xi eth0 port 53

You should, hopefully, not see anything.

Why you should be using HTTPS

2016-06-17T00:00:00Z

The EFF’s HTTPS Everywhere logo

One of my favourite hobbyhorses recently has been the use of HTTPS, or lack thereof. HTTPS is the thing that makes the little padlock appear in your browser, and has existed for over 20 years. In the past, that little padlock was the exclusive preserve of banks and other ‘high security’ establishments; over time its use has gradually expanded to most (but not all) websites that handle user information, and the time is now right for it to become ubiquitous.

Why use HTTPS?

There are numerous advantages to using HTTPS, both for the users of a website and for the operator:

Privacy

The most obvious advantage is that HTTPS gives your users additional privacy. An insecure (HTTP) request can potentially be read by anyone on the same network, or the network operators, or anyone who happens to operate a network along the path between the user and the server.

Users on shared WiFi networks (such as those in coffee shops, hotels, or offices) are particularly vulnerable to passive sniffing by anyone else on that network. If the network is open (as is frequently the case) then anyone in radio range can see exactly what the user is up to.

Integrity

HTTPS also helps to maintain the integrity of your site. With a plain HTTP request, there’s nothing to stop anyone in between the server and the user from modifying the content of the request or the response. This is a frequent tactic used by annoying WiFi gateways (such as the ones you’d find in a hotel), dubious ISPs who want to serve you extra adverts, or just plain old nefarious attackers.

If you’re trying to convey some kind of information to users (and if you aren’t, why exactly are you running a website again?) it seems beneficial to both you and them if the information arrives as you intended, rather than in a modified form due to someone or something tampering with it.

Security

If your website has any kind of authentication, or session identifiers, it becomes extremely vulnerable to an attacker monitoring the traffic and stealing the credentials. This was starkly demonstrated in 2010 when Firesheep was released. This tool allowed anyone to quickly and automatically hijack social media accounts of anyone on the same network who was using HTTP to access them.

Even if your login pages are served over HTTPS, if you send a single session ID cookie over HTTP (such as a page you decided wasn’t particularly ‘important’) then an attacker can probably spoof the user’s session and gain full access to their account. Again, in the case of open WiFi networks that could be anyone in radio range.

Search engine rankings

Some search engines use HTTPS as a signal in their ranking algorithms. Google announced in 2004 that it was using the presence of HTTPS as a small positive signal, but that it may strengthen that signal over time as more and more websites switch to using a secure transport. It’s not unthinkable that at some point in the future there will be HTTPS-only search engines.

But… But… But…

There are lots of excuses for not implementing HTTPS. Most of them are either misguided or outdated.

It’s too expensive and/or complicated

In the past, getting HTTPS certificates was a pain. A number of free suppliers have existed for a while but the process for getting their certificates wasn’t particularly straight forward, and many imposed arbitrary restrictions on the certificate parameters. Even once you had the certificate, you had to fiddle about with your HTTP server configuration to make it work, remember to manually get a new certificate when the old one expired, and lots of other annoying busywork.

With the arrival of Let’s Encrypt, all that changed. You can retrieve and deploy a free HTTPS certificate with two or three commands. Renewal can be handled completely automatically with a single command executed by cron.

There’s no point; nothing on my site is sensitive

You might not think your content warrants privacy, but can you speak for everyone who accesses it? Even content that seems mundane to you — such as travel advice, or technical writing — could be used to build up a profile of a user. If an attacker is monitoring traffic in a coffee shop and sees a user looking at travel advice and weather forecasts for a foreign country, he could use that information to plan a burglary knowing that the user will be away. Similarly, some content which is perfectly mundane to you may actually be very sensitive in other countries with repressive governments. HTTPS makes it much harder for these people to snoop on traffic.

From another angle, if you’re offering any kind of information, instructions, or especially file downloads, there’s a severe risk to users if the content is modified on its way to them. An evil sysadmin could rewrite your travel advice to suggest visiting the local drug dealer’s hangout, or replace your download with a malware-infested version.

HTTPS is slower, uses more resources, etc

Back in 1995 this might have been a valid argument. Enabling HTTPS on a modern server will make an almost negligible difference to performance. If you also enable HTTP/2 (which most implementations only support over HTTPS), it’s likely to actually use fewer resources, and result in a faster, smoother experience for your users. HTTP/2 was designed to work with HTTPS, and designed with modern requirements and networking techniques in mind.

CloudFlare have an excellent demonstration of the benefits of HTTP/2, and it can show speed improvements of 2-3x in a typical environment. On top of being faster, HTTP/2 uses fewer connections which results in less resource overhead on both the server and the client.

So what are you waiting for?

If you run a website and aren’t using HTTPS, give it a try.