Chameth.com - posts like docker-automatic-nginx-proxy, g15-ram-upgrade, thinking-more-about-backups but not reverse-engineering-arctis-pro-wireless-headset, why-you-should-be-using-https

An interesting Tailscale + Docker gotcha

2026-01-29T00:00:00Z

As I’ve written about before, I use Tailscale for a lot of things. I thought I had it set up in a reasonably secure manner, but I recently noticed a problem.

I use Tailscale’s ACLs to limit what each node can access, based on the tags I apply to it. So an app node can’t access anything via Tailscale, while an integration or server node can access things tagged with either app or integration. This is expressed pretty simply in the Tailscale ACL JSON:

{
	"tagOwners": {
		// Servers that can be SSH'd into
		"tag:server": [],
		// Applications that are exposed on tailscale but never connect out
		"tag:app": [],
		// Things which talk to other services over tailscale (connecting to apps etc)
		"tag:integration": [],
	},
	"grants": [
		{
			// Users can access everything
			"src": ["autogroup:member"],
			"dst": ["*"],
			"ip":  ["*"],
		},
		{
			// Servers and integrations can access integrations and apps
			"src": ["tag:server", "tag:integration"],
			"dst": ["tag:integration", "tag:app"],
			"ip":  ["*"],
		},
	],
}

Over the past week I’ve been setting up a private Forgejo instance behind Tailscale, complete with an actions runner that runs things using a docker-in-docker container. I didn’t want the runner knowing anything about Tailscale, so I had it configured to speak to Forgejo direct over HTTP (forgejo:3000) instead of using full Tailscale HTTPS URL that I use when accessing it (http://git.example-net.ts.net/)¹.

Everything was going fine, until I forgot to do that translation… and it worked. My Forgejo action runners could access anything on my tailnet. I run several things on Tailscale that just have authentication turned off, on the basis that only authorised devices can access them. Things like the admin interface for this website. I definitely didn’t intend for any workflow I run on my git server to have access to edit my website!

This wasn’t just limited to Forgejo, either. Any docker container I was running could access the tailnet. In hindsight it’s fairly obvious why: the host is running Tailscale, connected as a node tagged with my server tag. That creates a tailscale0 interface, and automagically sets up iptables rules to route Tailscale traffic over the interface. Docker also automagically sets up iptables rules to bridge traffic, and apparently these two sets of rules interact in such a way that traffic from Docker containers is allowed to route via the tailscale0 interface.

I say it’s fairly obvious in hindsight — there’s no reason why Docker would special case any particular host interface after all — but it still feels pretty surprising. Because both bits of software inject their own iptables rules, I never really had a good mental model for how they interact. The host Tailscale node was a completely separate building block to Docker. It would be a pain to use either of them if they didn’t do these rules, but it’s also one of the reasons I don’t really like “magical” things².

There are lots of ways to fix this, but none of them feel particularly great. You can configure both Tailscale and Docker to not automatically fiddle with iptables and handle the rules yourself, but I really hate dealing with iptables³. As a stopgap I did hold my nose and add some iptables rules to drop traffic to the tailscale0 interface if it originated from the IP ranges that Docker was configured to use:

iptables -I DOCKER-USER -s 192.168.0.0/16 -o tailscale0 -j DROP
iptables -I DOCKER-USER -s 172.17.0.0/12 -o tailscale0 -j DROP

The DOCKER-USER chain is a nice little escape hatch; it comes before the main auto-generated DOCKER chain, and Docker leaves the rules in it alone.

So I added these rules, and felt pretty good about myself, and then… everything started breaking in weird ways. After some debugging I realised the problem was DNS⁴. The server’s DNS resolver is 100.100.100.100, a special Tailscale address. This is so that it can resolve tailnet hostnames via MagicDNS (and so I don’t have to configure my custom DNS servers manually on each device; Tailscale does it for me). My new iptables rules inadvertently dropped all the DNS packets coming from docker containers. D’oh.

Obviously the solution here is to double down and add MORE iptables rules:

iptables -I DOCKER-USER -s 192.168.0.0/16 -d 100.100.100.100 -o tailscale0 -j ACCEPT
iptables -I DOCKER-USER -s 172.17.0.0/12 -d 100.100.100.100 -o tailscale0 -j ACCEPT

This got DNS working again, but it all feels a bit gross. Not least because to actually make these persist you need to use iptables-save, and then you also get all the rules that both Docker and Tailscale have inserted. I came across a script to filter out the Docker ones, but… yuck⁵.

I realised a cleaner idea might just be to lock down what server tagged nodes could access within Tailscale itself. That way I can avoid touching iptables at all. It’s handy to be able to curl services from the host when debugging, but it’s not really necessary. So I removed that access, and… stuff broke again. I’m using my Forgejo instance as a registry for some of the docker images I run, so the docker daemon needs to be able to reach it. I ended up making a new tag for infrastructure, which can be accessed from server devices. This does still allow all the docker containers to reach Forgejo, but I already have it set up with appropriate access controls and public/private repository splits. Forgejo is a service designed to run publicly, so this seems a reasonable trade-off for convenience. I used the tests feature of Tailscale’s ACL config to make sure I’d got the rules right:

{
	"tests": [
		{
			// Servers can only access infrastructure
			"src":   "tag:server",
			"proto": "tcp",
			"allow": [
				"tag:infrastructure:8080",
			],
			"deny": [
				"100.84.16.43:8080",
				"me@example.com:8080",
				"tag:server:8080",
				"tag:app:8080",
				"tag:integration:8080",
			],
		},
	],
}

The whole situation still feels a bit messy. If I ever get around to switching to nftables I might loop back and manually craft some rules for routing traffic, instead of leaving Tailscale and Docker to do their own thing.

I discovered later on that logging into the container registry at forgejo:3000 actually issued a redirect to https://git.example-net.ts.net/ so this was all basically for naught… ↩︎
I didn’t use Tailscale’s MagicDNS for a long time just because the word “magic” put me off. Only when I eventually got around to learning how it worked, and seeing that it wasn’t really that magical under the hood, did I change my mind. ↩︎
nftables seems far better in lots of ways, but I can’t really be bothered migrating. Maybe next time I reimage the server for whatever reason… ↩︎
It’s always DNS… ↩︎
Again, nftables would almost certainly help here. It actually has (gasp) configuration files. But again, I really didn’t want to spend the time migrating. ↩︎

Thinking more about backups

2025-11-01T00:00:00Z

The Backblaze logo

Almost a year ago I wrote about how I do backups with Restic and Hetzner. That system has been ticking along well ever since, but recently I had some… thoughts. These backups are all well and good if I accidentally delete a file, or a database gets corrupted, or something, but there are two glaring issues:

Firstly, I’m backing up my Hetzner server to Hetzner cloud storage. If something happens to Hetzner — or my Hetzner account — then all my eggs go down with that basket. Obviously Hetzner are a big organisation and aren’t likely to just vanish overnight, but I’m less confident about my account. Could a false abuse report get it suspended? What if the UK passes even more dumb laws and Hetzner decide it’s easier just to not do business with people here? This is the same sort of concern I have about Google accounts: if you have half of your life in Google Drive and Google Mail, what happens if you comment on a YouTube video, get flagged by an AI moderation process, and your account gets suspended? It’s probably not very likely, but these are things my brain likes to dwell on.

Secondly, the credentials to access the backups sit on each machine that is backed up. If someone malicious gained access to the machine, they’d also have access to delete or tamper with all the backups. It feels a little silly that the same attack could take down both the originals and the backups. There’s no way to avoid that with Hetzner’s S3 implementation, as far as I can tell.

Exploring options

I toyed with the idea of making local copies of the backups, but the only way to avoid the same problems would be to keep them offline and do a manual copy every now and then. I didn’t really want to do that, and was concerned that if I did a monthly offline backup then I stood to lose up to a month of data in the worst case.

I then looked around at other S3 providers. Amazon’s glacier offering is tempting due to its very low storage costs, but you pay for that if you ever want to restore anything. There are also lots of weird pricing edge cases around moving data between storage classes, minimum file sizes, and so on. A much better option is Backblaze’s B2 product. Their pricing is much more straight-forward, and they have an interesting feature that’s particularly useful in this case: lifecycle rules. Coupled with the ability to create API keys that don’t have access to delete files (just “hide” them), this allows for what’s effectively an append-only store.

This works more-or-less out of the box with Restic. Joseph Price has a guide that goes into the setup in a bit more depth. Basically, whenever Restic would delete a file (e.g. during a “forget” or “prune” operation), it instead gets hidden and is only deleted when the B2 lifecycle rules decide it should be. I’ve kept the existing Hetzner S3 backups for now, and just added an extra step to the end of my script: a simple restic copy and a restic forget. B2 actually works out cheaper than the Hetzner storage, as they don’t bill you for a minimum of 1TB storage; my current usage is around $3/month. Not a bad price for some extra peace of mind!

Simple backups with Restic and Hetzner Cloud

2024-12-06T00:00:00Z

Restic’s mascot, who’s dual-wielding umbrellas to save you from a rainy day.

I have a confession: for the past few years I’ve not been backing up any of my computers. Everyone knows that you should do backups, but actually getting around to doing it is another story.

Don’t get me wrong: most of my important things are “backed up” by virtue of being committed to remote git repositories, or attached to e-mails, or re-obtainable from the original source, and so on. I don’t think any machine failing completely would be a disaster for me, but it would certainly be a pain.

This week I finally got around to doing something, and it ended up being a lot more straight forward than my previous forays into backup-land.

Restic

After soliciting a few opinions, the choice of backup software came down to either Borg or Restic. I’m pretty sure either would have done what I want, but I leaned towards Restic for a few reasons: it has a more informative website, it’s written in Go rather than Python¹, and Borg seems to be transitioning between major releases at the moment².

The way Restic works is pretty simple: you initialise a ‘repository’, and can then call restic backup /some/path and it’ll get backed up to the repository. Restic handles keeping different backups separate, and only sending data that’s changed, and deduplicating, and so on. You basically point it at a thing you don’t want to lose, and it sorts it out for you. Perfect.

There are equally straight-forward commands for removing old snapshots (restic forget) and verifying backups (restic check). One of the nice things about modern backup solutions is they support a whole range of backends. I was originally going to spin up a small VPS to host my backups, but noticed that Restic supported S3-compatible stores…

Hetzner Cloud Object Storage

I host my servers with Hetzner, and was going to use them to spin up a VPS as well. Despite the “Cloud” branding on a bunch of products, they offer reasonable prices and good service. A couple of months ago, they started offering S3-compatible object storage.

The pricing isn’t totally straight forward, but for continuous use the “free quota” amounts to 1TB of storage and 1TB of egress a month. Ingress is free, as is traffic within the eu-central region (where all my servers are). That quota is only awarded when you pay the “base price”, though, which is €4.99 a month. So basically it’s €5 a month for 1TB of storage and enough egress to fully restore every single byte. That’s better value than any VPS I can find, much cheaper than Amazon S3, and about the same as Backblaze B2.

Getting them to work together

Now you’d think making the tool that supports S3-compatible object storage work with your S3-compatible object storage would be easy, right? Well not quite. The library Restic uses to deal with S3 backends has some strange logic for figuring out the bucket name given a URL. It doesn’t quite seem to work right, though…

Hetzner buckets have URLs like s3://bucketname.hel1.your-objectstorage.com³, but just passing that to Restic gives an error that the bucket is not specified. The docs mention there’s an advanced option to make it use the virtual host for the bucket name: -o s3.bucket-lookup=dns. But that… also doesn’t work. What I ended up doing was specifying the URL as s3://hel1.your-objectstorage.com/bucketname, and also passing in the dns option. The library then seems to muddle its way back to a real, working URL. I’m not sure why it works like this: maybe it’s just a weird aspect of S3 that I’m oblivious to?

The next fun part is that you can configure Restic entirely by using environment variables, except for that -o s3.bucket-lookup=dns argument. That has to go on the command line. I ended up making a little wrapper script to invoke Restic correctly:

#!/bin/sh

# The password restic will use to encrypt your data. You should generate
# something nice and secure.
export RESTIC_PASSWORD=repo-password

# The path to the repository where restic will save the backup. In our case
# this takes the form `s3:<endpoint>/<bucket>`. Your endpoint might be different
# to mine depending on the region your bucket is in.
export RESTIC_REPOSITORY=s3:hel1.your-objectstorage.com/bucket-name

# The access and secret key generated in the 'S3 credentials' section of the
# Hetzner Cloud Console
export AWS_ACCESS_KEY_ID=hetzner-access-key-id
export AWS_SECRET_ACCESS_KEY=hetzner-access-key

# Pass any arguments on to the restic command, along with the magic
# `s3.bucket-lookup` option we need to resolve the S3 URL properly.
exec restic -o s3.bucket-lookup=dns "$@"

Then in the backup script I just alias restic to use the script:

#!/bin/bash

set -eu

# This means any time we use `restic` below, we'll actually execute our special
# script which supplies all the env vars and arguments needed to find the
# repository. Make sure the path matches where you saved the script!
alias restic='~/.bin/restic'

# Actually do the backup. Each directory in the list below will be backed up
# separately.
dirs=(
	"/some/path/to/backup/"
	"/some/other/path/"
)
for i in "${dirs[@]}" 
do
	echo $i
	(cd $i && restic --verbose backup .)
done

# Prune our snapshots. You can tweak the numbers here. Run with `--dry-run` to
# see what effect any changes would have before actually committing to them. 
restic forget --keep-daily 7 --keep-weekly 10 --keep-monthly 24 --keep-yearly 10

The only other notable thing here is that the script changes into the directory to be backed up. If you give Restic an absolute path, it will create a new snapshot if the metadata of any folder in the path changes, which is not what I want.

If it wasn’t for the S3 URL issues, the whole thing would’ve probably taken me about half an hour. That’s including setting up the object storage, installing Restic, and so on. It’s painfully easy. Why didn’t I do this three years ago?!

Addendum: a step-by-step guide

If you want to do this yourself, here’s a quick step-by-step guide:

Log in to the Hetzner Cloud Console, and create a project.
On the “Object Storage” tab, create a new bucket. Note the name and the endpoint.
On the “Security” tab, go to “S3 Credentials” and generate new credentials. Note down the access key and the secret key.
Copy the first shell script above, fill in the password (you can pick!), endpoint, bucket name, access key and secret key.
Run the script with the init argument (e.g. ~/.bin/restic init). This will create a new repository, and only needs to be done once even if you backup multiple machines.
Copy the second shell script above, making sure the restic alias points at the script you saved in step 4. Change the list of directories to whatever you want to backup.
Schedule the script to be run automatically, using crontab or systemd timers or however you prefer.

To check everything is working, you can use the snapshots subcommand to see a list of saved snapshots. You might also want to try to restore a snapshot using the restore subcommand.

I’m not trying to be a language snob, but given the choice between two otherwise equal projects one in Go and one in Python, I’ll take the Go one. I know I’m not going to have weird library issues down the line, and I’m much more comfortable rummaging around the source. ↩︎
With a “Don’t use this in production!” notice on the shiny new version. ↩︎
Aside: I really hate URLs like that. What is with the trend for completely generic domains divorced from the service they’re a part of? ↩︎

Upgrading the RAM in a Dell G15 laptop

2023-07-29T00:00:00Z

The Dell G15

I currently use a Dell G15 laptop for work. It has served me well for a little over a year, but recently it has been struggling a little with my day-to-day workload. It came with 32GB of RAM — the highest possible specification at the time¹ — but that is apparently no longer enough for me.

For a recent project, I was working on a Rust library used in an Android app. That meant running the usual glut of Android tools (Android Studio, an emulator and at least one Gradle daemon) alongside a normal IDE (IntelliJ IDEA). Throw in a web browser and a couple of electron apps, and I often managed to use all 32GB.

When you start swapping memory out to an encrypted disk — even an SSD — it doesn’t make for great performance. At first, I tried to work around this by enabling the Linux out-of-memory (OOM) killer, but it turns out that it’s not too good with Electron apps: it will kill the large browser process, but then the small Electron wrapper will just respawn it.

Can it be upgraded or not?

The obvious solution to not having enough RAM is to add more RAM. A quick look in the manual showed this might not be possible, though. The manual includes the following “Memory specifications” table:

Description	Values
Memory slots	Two SODIMM slots
Memory type	DDR5
Memory speed	4800
Maximum memory configuration	32GB
Minimum memory configuration	8GB
Memory size per slot	8GB or 16GB
Memory configurations supported	8 GB, 1 x 8 GB, DDR5, 4800 MHz 16 GB, 1 x 16 GB, DDR5, 4800 MHz 16 GB, 2 x 8 GB, DDR5, 4800 MHz, dual-channel 32 GB, 2 x 16 GB, DDR5, 4800 MHz, dual-channel

That unambiguously says that an upgrade from 32GB is not possible. I gave up.

Later though, I was complaining about memory issues to a friend, and he pointed out a Dell forum thread where a couple of people claim to have successfully installed dual-channel 32GB modules. Since the alternative was getting an entire new PC after only a year, I decided to give it a go.

The upgrade attempt

I ordered a pair of Crucial 32GB DDR5-4800 SODIMMs, and after they turned up dismantled the laptop. The G15 comes apart pretty normally: there are uncovered screws on the bottom holding the lower part of the case on. With those removed and some gentle prying, it pops off, and you get access to the battery, GPU and motherboard.

The first thing I saw was this:

The G15 motherboard adamantly proclaiming that it doesn’t want 32GB SODIMMs

Not one but two labels that indicate it will only accept 8GB or 16GB modules. Oh well, what’s the worst that can happen?

Oops?

I dutifully installed the new modules, reconnected the battery and put the case back together. I pressed the power button, and… nothing. None of the usual garish lights that immediately come on, no screen output, just a dead laptop. After reading some more of the user manual, I found that there is a tiny status LED on the side next to the ethernet port. Forcing the laptop to power off and back on again, the status LED blinked a distress code at me: 2 amber blinks, 4 white blinks. The manual says that is — unsurprisingly — a memory fault.

I figured at this point that the manual and labels on the motherboard were probably right. I took the laptop apart again, reinstalled the original 2x16GB modules, reassembled it, and pressed the power button. It didn’t boot. I don’t spend a lot of time fiddling inside computers, but I’ve done it enough that I’m reasonably confident I can’t entirely break a computer while swapping some RAM modules. I took to Googling², and found an interesting article that said Dell laptops don’t like to boot after RAM changes unless you clear the CMOS by popping out the battery for 15 minutes.

I opened the laptop up, and looked around for the CMOS battery. There wasn’t one. Turns out they don’t exist any more. I left the main battery disconnected for a while to see if it would help, and it didn’t.

Unexpected success

I started to get worried: if I couldn’t fix this, I wouldn’t be able to work until I got a new PC, and that wasn’t really in my budget at the minute. I sat reading old forum threads and help guides³, none of which were actually useful. Out of nowhere, though, the laptop booted up.

Naturally, I immediately shut the laptop down again, opened it up, and switched back to the new RAM modules. Then I turned it on again and sat waiting. After about 15 minutes of it looking totally dead, it turned on and showed a BIOS warning about the hardware configuration being changed. It then booted perfectly normally, and all 64GB of RAM was visible and usable.

My theory is that the forum threads were right: Dell laptops are funny about RAM upgrades. But somehow in removing the physical CMOS battery, they’ve kept the same “you have to wait 15 minutes” behaviour just without any indication that’s what’s happening. Regardless, I now have enough RAM even for the greediest of IDEs and Electron apps.

Bizarrely, the maximum spec has decreased to 16GB since then. ↩︎
In the generic sense. I use Kagi these days. ↩︎
On my phone because, y’know, the laptop was busted. ↩︎

Docker reverse proxying, redux

2022-12-06T00:00:00Z

Six years ago, I described my system for configuring a reverse proxy for docker containers. It involved six containers including a key-value store and a webserver. Nothing in that system has persisted to this day. Don’t get me wrong – it worked – but there were a lot of rough edges and areas for improvement.

Microservices and their limitations

My goal was to follow the UNIX philosophy of “do one thing and do it well”. Unfortunately, that doesn’t really work when applied to network services that have to interact with one and other. UNIX tools are built upon a common file system and simple data passed over STDIN. Microservices don’t have that shared foundation. You could make one: companies that use microservices in anger often have a team that deals with the “developer experience” of creating and using microservices. But as a solo developer that’s not something I wanted to spend my time doing.

This became very apparent when trying to debug issues. In the UNIX world, if your series of commands piped together does something strange you can simply echo the data at various stages. Not so much when that data is flying around on a network, going into and out of things like etcd. Trying to figure out why a certificate hadn’t been acquired was a case of searching through logs from four containers, none of which had particularly good logging. There are many ways to get insight into what’s happening with microservices but, again, that’s not something I wanted to do myself.

Over time, and with experience in other projects, I came to realise that microservices only really make sense if you’re unable to deploy a monolith. For tech companies this naturally happens when different teams contribute to the same service: splitting it out into smaller services that are wholly owned by individual teams makes sense. For solo developers, that never happens. You can still gain the other benefits of microservices – such as code separation and having clearly defined APIs – by sticking to certain coding standards.

Proxy inconveniences

As well as being unhappy with the microservice nature of the solution, I wasn’t pleased with nginx. If you requested an unknown domain, nginx would use the first server block in its config to serve a response, instead of sending an “unrecognised name” alert as I wanted. It was a minor issue, but it irked me.

So from nginx I switched to haproxy. It has a strict-sni option when configuring TLS connections which makes it behave properly. It also performs a lot better for this type of workload than nginx. All was well for a while, but then I started getting alerts that requests were occasionally failing. I couldn’t reproduce the issue, but my nightly jobs to build and push containers managed to hit it nearly every night, causing them to fail.

After some investigation, I found that the haproxy developers had refactored the header parsing code, and neglected to properly reset flags when multiple requests were sent over the same connection. There was a patch, but it wasn’t released. No problem, I thought, I’ll just cherry-pick it onto the last release… Except that haproxy use Git in the most convoluted manner I’ve ever seen – they have one repository per release. This makes it harder to patch, but it also made me question whether I trusted them to ship stable software: there were no tests for the header parsing code (which is both fundamental and finicky, the perfect target for tests), the source code management was weird, and they didn’t seem in any rush to patch this bug.

Not long after that issue, Greg managed to encounter another bug where haproxy returned a 500 error whenever the upstream server replied with a particular, perfectly valid, header. The die was cast – it was time to move to something else.

Not Invented Here syndrome

Looking for a new solution, there were many more options than back in 2016. I’m still convinced, however, that anything exposed to the Internet should not have access to run docker containers. It’s the modern equivalent of running a CGI script as root. That single requirement eliminates most off-the-shelf solutions. What do you do when nothing quite meets your specific requirements? You make something yourself! My new solution has two components: Dotege and Centauri.

Dotege is a replacement for the microservices that monitored containers and obtained certificates. It’s fundamentally a templating engine - whenever the containers change, it evaluates a template and saves the result to disk. The template has access to details about the containers, their labels, ports, and so on. Dotege can also obtain certificates from Let’s Encrypt, and raise a signal against another process whenever the template or certificates change. I used this to generate the configuration and certificates used by haproxy for a while, and more recently changed the template so that it works for Centauri.

Centauri is my own reverse proxy. It’s configured using a simple text file and can also obtain certificates from an ACME provider. It doesn’t serve static content, has no knowledge about docker, and avoids the other bells and whistles that adorn most reverse proxies. It also has good test coverage to ensure that I don’t, say, accidentally break header parsing.

As a software engineer I enjoy writing software, but I also enjoy running simple, easy to understand software. That’s what I’ve achieved here: it’s very easy to identify where the problem is if anything goes wrong, both are small Go programs rather than vast sprawling C monstrosities, and their interaction is primarily through a file written to disk that can be inspected or edited as needed.