Chameth.com - posts like escaping-spotify-the-hard-way, how-i-use-tailscale but not debugging-beyond-the-debugger, migrating-from-github-to-forgejo, why-you-should-be-using-https

Monthly Meanderings: August 2026

2026-09-01T00:00:00Z

Another month, another edition of “What’s Chris been up to?”. Fun fact: I very nearly published this post with a “[intro]” placeholder here instead of this paragraph, despite proofreading it multiple times. “Yep, that’s where the intro will go, all good”. Now instead we have this weirdly meta introduction.

Website updates and other projects

A few website updates this month, and one of them neatly addresses the “other projects” bit too. First, I’ve added a new fitness page which has some stats and information about my cycling and running. I’ve also added some fitness-related widgets to support that page and these monthly summaries, and a new music one you can see a bit further down.

I’ve also added what I think is quite a fun new feature: a post feed builder that lets you build RSS feeds containing only posts that are semantically similar (or dissimilar) to other posts. So if you want to only hear about my fitness journey you can pin a few of those posts, or if you want to exclude posts that talk about LLMs you can exclude a few of those. It’s basically super-charged fuzzy tags, but it means I don’t have to actually tag things.

I blogged about building a family of single-user services which is where most of my coding energy went this month. Those projects were almost entirely authored by LLMs, and I’m not hating the process. The models have got a lot better at coding, and I enjoyed getting to focus on the bigger picture aspects rather than getting bogged down in details. Rest assured, all the writing on my website is still 100% me. I am the load-bearing seam, here.

Entertainment

Back in March I said ‘I can’t do “what I listened to last month” stats until next month’, and then for the next four months completely forgot about it. Well, not any more! Now I come equipped with some stats about my monthly music habits:

	Album	Artist	Unique tracks played	Total tracks played
1	Fallen	Evanescence	8	40
2	Love, Drugs & Misery	Eva Under Fire	12	32
3	NEON VOID	Sumo Cyco	6	23
4	The Strange Case of…	Halestorm	11	21
5	Coming in Hot	DIAMANTE	9	20
6	Everest	Halestorm	7	20
7	Glory Days	Little Mix	5	20
8	From Zero	Linkin Park	9	19
9	KPop Demon Hunters (Soundtrack from the Netflix Film)	KPop Demon Hunters Cast	7	19
10	No Need to Argue	The Cranberries	6	19

I suspect I won’t show this every month, as it’s probably going to be quite same-y. I, shockingly, tend to play music that I like more than that which I don’t. I’ll usually either put on my “favourites” playlist, or my “daily mix” playlist which biases higher-rated tracks over lower ones. So effectively this just becomes a noisy view over how highly I’ve rated the tracks in an album. Maybe I can control for that, but then I’m not sure what it’d actually be showing… “Here are all the albums I played this month that I don’t usually play because I don’t like them as much as the other albums I’m not showing any more”? It’s a bit wordy. Back to the drawing board with that idea, I think.

I was away for a few weeks this month, including a few days at a small LAN event. Being at a computer gaming event meant that we, naturally, played some board games. Apparently I hit an h-index of 23 from these plays. That’s 23 games I’ve played at least 23 times each. I’ve been at 22 since December last year: obviously the higher the number goes, the harder it is to reach. I also go on and off games (and the whole hobby at times), which doesn’t help on that front. Anyway, here’s ~~Wonderwall~~ the plays for this month:

6 plays
3 plays
3 plays
1 play
1 play

No films this month, but my World of Warcraft habit has picked back up with the launch of the new season. They’ve made Mistweaver Monk, my previous specialisation, a lot less fun to play, so I’m focusing on one of my many alts: a Restoration Shaman:

Level 90

Female Dwarf

Restoration Shaman

309 average item level

Hirameth-Terenas

Professions

Midnight Blacksmithing		42/100
Midnight Inscription		74/100
Midnight Fishing		35/300

Mythic+

Altar of Fangs	+10	23:10	329
Den of Nalorakk	+10	27:36	325
Kings' Rest	+12	28:57	370
Murder Row	+12	28:37	371
Ruby Life Pools	+11	24:28	340
Temple of Sethraliss	+10	30:57	321
The Blinding Vale	+10	24:38	327
Voidscar Arena	+10	22:37	329
Total M+ rating	2711

View on blizzard.com View on raider.io

I don’t quite like it as much as Mistweaver in season 1, but it’s a lot nicer than Mistweaver in season 2. You can actually make health bars move when you press your healing buttons, rather than ignoring half of them because they’re not worth using.

Fitness

My running kick is still going. I’ve “officially” finished the couch-to-5k programme I was doing, and I actually hit 5k on the last day of the programme. I didn’t actually mean to do that: I was saving the 5k run for this week, but by the time I noticed I’d run “too far” it was close enough that I just kept going. I have an actual 5k race coming up this month, which is exciting. Once that’s over I’m planning to work my way up to 10k. I’ve added a few widgets to keep track of some stats:

activities

6h 5m

total time

103.6km

total distance

42.3km

longest distance

🏆️ New PB 1km 2:16 1:52
🏆️ New PB 2km 5:36 4:13
🏆️ New PB 5km 14:44 12:32
🏆️ New PB 10km 36:13 27:21
🏆️ New PB 20km 1:43:43 1:13:24
🏆️ New PB 30km no previous 1:54:25
🏆️ New PB 40km no previous 2:55:52

activities

6h 16m

total time

43.1km

total distance

5km

longest distance

🏆️ New PB 800m 6:20 6:02
🏆️ New PB 1km 7:44 7:36
🏆️ New PB 1 mile 12:43 12:16
🏆️ New PB 2km 15:48 15:16
🏆️ New PB 3km 24:38 23:05
🏆️ New PB 5km no previous 38:40

As well as the running, I did a couple of long (for me) cycle rides, clocking in at around 40 km. It’s a fun loop, but both times I did it I started flagging towards the end. The second time I made sure to eat and drink plenty along the way, and my legs still raised objections about halfway round. My next goal is 50 km which would let me get to the next town over and back but the route has a lot more elevation to go with its increased length, so it’s probably going to be quite a bit more taxing. I’m not sure when I’ll attempt that, as the weather is starting to turn. I was previously bemused when people mentioned “cycling seasons” and switching to indoor trainers. Then I wanted to go out when it was raining, and suddenly I understood. Running in the rain: surprisingly pleasant; cycling in the rain: no thank you.

Around the web

Hacker News In Uncompromised Detail

When I first read the title my gut reaction was “I know everything I need to know about Hacker News, right?”. The title is accurate though. There’s so much interesting stuff, presented really cleanly. It’s a good read.

A proposal for new Netflix content rating icons

Another dry sounding title, another fun article. It starts with a treatise on rating systems and ends with a lovely satirical list of rating ideas.

Find Git commits by commit message text

I like to think I’m relatively well versed in how to use Git. I can do an interactive rebase and everything! This tip from Ham was new to me, though, and is incredibly useful.

Novice Marathon Training Plan

Hal Higdon has a whole bunch of training plans. He literally wrote the book on marathon training. I’ll hopefully be following this plan next year, assuming I manage the 5k, 10k and half-marathon training! This would be the perfect plan for someone who’s run a half marathon a while ago, and is tempted to join me in my “marathon before I’m 40” goal…

Monthly Meanderings: March 2026

2026-04-01T00:00:00Z

Since last month’s update I’ve been unpleasantly reminded that I’m middle aged, through the medium of a dodgy knee. There’s nothing quite like not being able to stand up without groaning to underscore that you’re not young any more. The ongoing game of “will this seemingly mundane activity make my knee go funny again?” is a delight to play, too. I’m great at it.

Website updates

Two new blog posts this month: the longest way to represent a date is a short thought experiment on absurd date formats, and modern CSS is fun goes through some neat new CSS features I’ve used recently for this site.

I did some design tweaks this month: headers now have a blue background behind them¹, and a lot of components have been redesigned to have a consistent style. You can see that component in action in the new “now playing” widget I’ve added:

DIAMANTE — Serves You Right American Dream Scrobbled 9h 49m ago

Instead of each component defining its own styles (which were mostly copied and pasted), there’s now a single class that handles the drop shadow, border, background colour, and the optional title. It also applies a consistent format to elements that are clickable: they use the blue accent colour for their borders, and have a glow effect shown on hover.

The now playing widget is part of a larger bit of work I did on importing some music stats. I’m pulling in the data from my Navidrome instance. A new music page shows my most listened albums and artists. Navidrome doesn’t store a complete play history, just the last play and the count, so I can’t do “what I listened to last month” stats until next month.

Other projects

Other than a minor bug-fix update to contempt, my Dockerfile templating/updating tool, I’ve not done much on my other open source projects. I’ve got a bit more work to do finish migrating all my repositories from GitHub to my private Forgejo instance. I’ve also been thinking about mirroring my public repositories to Codeberg so there’s a non-GitHub way to access them.

Entertainment

I apparently only watched a single film in March:

The Substance

2026-03-18

I really didn’t get on with this. It’s too long for what it is, and over-the-top in a way that just didn’t work for me.

Demi Moore and Margaret Qualley were great, but nothing else really was. The cinematography and sound design were too affected, the plot was pretty shallow and obvious, most of the body horror fell into the uncanny CGI valley for me.

It’s not completely without merit: there were around 40 minutes in the middle where I was really into it, but that’s not really enough given it’s closing in on a 2.5 hour runtime.

There’s something to be said for the message it’s presenting about women in Hollywood, too, but it was very heavy handed. Dennis Quaid’s character is even called Harvey; it’s not so much a subtle nod as a sledgehammer to the face.

Instead of films, I’ve been watching a bunch of TV. After devouring The Pitt last month, I struggled to find something to fill the hole it left. I settled on catching up on Chicago Fire and Chicago P.D.. They’re both mostly about getting things done without personal drama becoming the primary focus. They’re not quite as grounded as The Pitt, but at least they’ve not completely gone off the deep end like 9-1-1 where the first responders end up in space somehow?

I’ve also watched the first two episodes of SNL UK. I didn’t have very high expectations, and it gave me a pleasant surprise. Both episodes so far have some hilarious sketches, and are obviously written by British comics with the typical darker, more sardonic humour that separates us from the USA.

Last but not least, board games! I spent a weekend at a tabletop/LAN event with friends, so got to physically play some games for a change. I also kept up with some turn-based games on Board Game Arena, as usual.

6 plays
4 plays
4 plays
4 plays
3 plays
3 plays
3 plays
2 plays
2 plays
2 plays
2 plays
2 plays
1 play

Around the web

Warranty Void if Regenerated

Some really cool speculative fiction about a future where all software is written by LLMs, and the social effects that may have. Unfortunately the story itself is written with an LLM, and that becomes painfully obvious about a third of the way in. By that point I was already hooked, though.

My 2-step process for AI-free blogging

Speaking of LLM-generated text, this short piece by Manuel Moreale made me laugh. I’m by no means anti-LLM, but I really hate people publishing the output like it’s their own work. It breaks the social assumption that the writer put more effort in than the reader, and makes me wonder how much is hallucinated.

25 Years of Eggs

An interesting applied use of coding agents. I’m a sucker for personal statistics. I have no explicit desire to keep my receipts, or generate graphs of my egg consumption, but seeing the graphs makes me question that. The journey to get there is a great read, too.

I made a one-page notebook

The clever paper folding is interesting, but I really like some of the small touches on the page. There’s a nice little “in reply to” callout providing context at the top of the page, you can click to rotate the image further down, and there’s a details element containing a textual version of it. It has that great ‘small web’ vibe of someone who really cares about what they’re doing.

Workers who love ‘synergizing paradigms’ might be bad at their jobs

I haven’t read the full paper, but the summary given by the article is equal parts interesting and amusing. They developed a “Corporate Bullshit Receptivity Scale”, what more is there to say?

It’s meant to resemble painter’s tape, but I’m not sure quite how well it works. ↩︎

An interesting Tailscale + Docker gotcha

2026-01-29T00:00:00Z

As I’ve written about before, I use Tailscale for a lot of things. I thought I had it set up in a reasonably secure manner, but I recently noticed a problem.

I use Tailscale’s ACLs to limit what each node can access, based on the tags I apply to it. So an app node can’t access anything via Tailscale, while an integration or server node can access things tagged with either app or integration. This is expressed pretty simply in the Tailscale ACL JSON:

{
	"tagOwners": {
		// Servers that can be SSH'd into
		"tag:server": [],
		// Applications that are exposed on tailscale but never connect out
		"tag:app": [],
		// Things which talk to other services over tailscale (connecting to apps etc)
		"tag:integration": [],
	},
	"grants": [
		{
			// Users can access everything
			"src": ["autogroup:member"],
			"dst": ["*"],
			"ip":  ["*"],
		},
		{
			// Servers and integrations can access integrations and apps
			"src": ["tag:server", "tag:integration"],
			"dst": ["tag:integration", "tag:app"],
			"ip":  ["*"],
		},
	],
}

Over the past week I’ve been setting up a private Forgejo instance behind Tailscale, complete with an actions runner that runs things using a docker-in-docker container. I didn’t want the runner knowing anything about Tailscale, so I had it configured to speak to Forgejo direct over HTTP (forgejo:3000) instead of using full Tailscale HTTPS URL that I use when accessing it (http://git.example-net.ts.net/)¹.

Everything was going fine, until I forgot to do that translation… and it worked. My Forgejo action runners could access anything on my tailnet. I run several things on Tailscale that just have authentication turned off, on the basis that only authorised devices can access them. Things like the admin interface for this website. I definitely didn’t intend for any workflow I run on my git server to have access to edit my website!

This wasn’t just limited to Forgejo, either. Any docker container I was running could access the tailnet. In hindsight it’s fairly obvious why: the host is running Tailscale, connected as a node tagged with my server tag. That creates a tailscale0 interface, and automagically sets up iptables rules to route Tailscale traffic over the interface. Docker also automagically sets up iptables rules to bridge traffic, and apparently these two sets of rules interact in such a way that traffic from Docker containers is allowed to route via the tailscale0 interface.

I say it’s fairly obvious in hindsight — there’s no reason why Docker would special case any particular host interface after all — but it still feels pretty surprising. Because both bits of software inject their own iptables rules, I never really had a good mental model for how they interact. The host Tailscale node was a completely separate building block to Docker. It would be a pain to use either of them if they didn’t do these rules, but it’s also one of the reasons I don’t really like “magical” things².

There are lots of ways to fix this, but none of them feel particularly great. You can configure both Tailscale and Docker to not automatically fiddle with iptables and handle the rules yourself, but I really hate dealing with iptables³. As a stopgap I did hold my nose and add some iptables rules to drop traffic to the tailscale0 interface if it originated from the IP ranges that Docker was configured to use:

iptables -I DOCKER-USER -s 192.168.0.0/16 -o tailscale0 -j DROP
iptables -I DOCKER-USER -s 172.17.0.0/12 -o tailscale0 -j DROP

The DOCKER-USER chain is a nice little escape hatch; it comes before the main auto-generated DOCKER chain, and Docker leaves the rules in it alone.

So I added these rules, and felt pretty good about myself, and then… everything started breaking in weird ways. After some debugging I realised the problem was DNS⁴. The server’s DNS resolver is 100.100.100.100, a special Tailscale address. This is so that it can resolve tailnet hostnames via MagicDNS (and so I don’t have to configure my custom DNS servers manually on each device; Tailscale does it for me). My new iptables rules inadvertently dropped all the DNS packets coming from docker containers. D’oh.

Obviously the solution here is to double down and add MORE iptables rules:

iptables -I DOCKER-USER -s 192.168.0.0/16 -d 100.100.100.100 -o tailscale0 -j ACCEPT
iptables -I DOCKER-USER -s 172.17.0.0/12 -d 100.100.100.100 -o tailscale0 -j ACCEPT

This got DNS working again, but it all feels a bit gross. Not least because to actually make these persist you need to use iptables-save, and then you also get all the rules that both Docker and Tailscale have inserted. I came across a script to filter out the Docker ones, but… yuck⁵.

I realised a cleaner idea might just be to lock down what server tagged nodes could access within Tailscale itself. That way I can avoid touching iptables at all. It’s handy to be able to curl services from the host when debugging, but it’s not really necessary. So I removed that access, and… stuff broke again. I’m using my Forgejo instance as a registry for some of the docker images I run, so the docker daemon needs to be able to reach it. I ended up making a new tag for infrastructure, which can be accessed from server devices. This does still allow all the docker containers to reach Forgejo, but I already have it set up with appropriate access controls and public/private repository splits. Forgejo is a service designed to run publicly, so this seems a reasonable trade-off for convenience. I used the tests feature of Tailscale’s ACL config to make sure I’d got the rules right:

{
	"tests": [
		{
			// Servers can only access infrastructure
			"src":   "tag:server",
			"proto": "tcp",
			"allow": [
				"tag:infrastructure:8080",
			],
			"deny": [
				"100.84.16.43:8080",
				"me@example.com:8080",
				"tag:server:8080",
				"tag:app:8080",
				"tag:integration:8080",
			],
		},
	],
}

The whole situation still feels a bit messy. If I ever get around to switching to nftables I might loop back and manually craft some rules for routing traffic, instead of leaving Tailscale and Docker to do their own thing.

I discovered later on that logging into the container registry at forgejo:3000 actually issued a redirect to https://git.example-net.ts.net/ so this was all basically for naught… ↩︎
I didn’t use Tailscale’s MagicDNS for a long time just because the word “magic” put me off. Only when I eventually got around to learning how it worked, and seeing that it wasn’t really that magical under the hood, did I change my mind. ↩︎
nftables seems far better in lots of ways, but I can’t really be bothered migrating. Maybe next time I reimage the server for whatever reason… ↩︎
It’s always DNS… ↩︎
Again, nftables would almost certainly help here. It actually has (gasp) configuration files. But again, I really didn’t want to spend the time migrating. ↩︎

Exposing game servers over Tailscale

2025-12-07T00:00:00Z

I’ve recently been playing a lot of Factorio with a friend. I’ve been hosting, but my desktop computer is behind far too many layers of NAT, and I can’t be bothered dealing with setting up port forwards. Up until today we made do with Steam’s networking support, which in our case ended up relaying the connection via one of their servers. This is amazing as a free, no-hassle service, but the performance was so-so. We’d get random lag spikes, or the initial map download would crawl along at about 1/100th of the speed we should be able to get. We’re both fans of Tailscale though, so maybe there’s an easy solution there?

Tailscale even have an article on sharing a Factorio server but it’s a ten minute long video¹, and focused on setting up an actual dedicated server in Docker rather than just clicking the convenient “Host” button in the game client. What we did instead was:

I shared my desktop’s Tailscale node with my friend, by creating a sharing link in the Admin console
My friend accepted the link, and could then see my machine in their admin panel
I used tailscale lock to sign my friend’s desktop’s node key, as I have tailnet lock enabled
I added a grant to my tailnet’s ACL to permit access from my friend to the specific IP/port on my tailnet:

		{
			"src": ["friend@example.com"],
			"dst": ["100.0.0.42", "fd7a::42"],
			"ip":  ["udp:34197"],
		}

After this, my friend could connect to Factorio by entering the Tailscale IP address, or the Tailscale hostname (as they use MagicDNS). Running tailscale status shows that Tailscale managed to establish a direct connection despite the many layers of NAT involved, and the performance improvements were significant and immediate.

We did a bit of testing, and confirmed that no other services on my machine are accessible. And sharing a machine by default only allows it to accept incoming connections, so I can’t get unwanted access to anything on my friend’s Tailnet, either.

I’ve written before about all the different ways I use Tailscale; this is yet another new way it’s solved a problem for me.

I’m not a fan of video tutorials at the best of times, but especially not when I want to do something as quickly as possible so I can get back to ~~my addiction~~ growing the factory. ↩︎

Securing all the things with 1Password

2025-11-26T00:00:00Z

For many years I’ve been a keen user of Bitwarden. Recently I’ve had a lot of small paper-cut problems. The browser extension was redesigned and just doesn’t quite work how I expect any more. The prompt to save new login info misfired more than it worked. The mobile app stopped background refreshing properly. No one issue was enough to make me want to leave Bitwarden, but it definitely wasn’t sparking joy. Then there were rumblings about a price increase. I don’t think they’ve announced anything, but the numbers I saw were a jump from $10/year to $24/year. A nearly 2.5x price increase for a tool that was actively getting worse over time did not seem like a good deal to me¹.

I spent a while looking at alternatives, but there were very few that met my needs. Nordpass is highly praised but doesn’t support saving TOTP codes on personal plans². All the nice open-source/self-hosted solutions fall down when you want reliable synchronisation to an iOS device (which is fair enough). Proton Pass looked like it had all the features, but the pricing was asinine. Different pages showed different prices, the prices were introductory rates that jumped up on renewal, but that was hidden away in small print, etc. Yuck. The prices are also pretty high. More or less the same as 1Password, which I’d been discounting due to the cost, until now…

After eliminating basically every other option, I took a serious look at 1Password. It seemed to tick all the right boxes, I’d often heard good things about it, and it wouldn’t actually be much more expensive than Bitwarden if they went ahead with the rumoured price increase. I started a trial to give it a test.

Initial impressions

1Password is — as you’d expect for something that originated as a Mac app — very pretty. But it’s also highly functional. The looks don’t get in the way, they’re nice extras on top. When it’s locked, you get a large version of the 1Password logo, which is a front-on view of the barrel of a lock, next to the password input. When you authenticate, the barrel turns as though you’d put a key in and rotated it, and then the background splits in two and opens like a vault door. Does a password manager need to do that? No. Does it make me a little bit happy every time I see it? Yes. Look at it, it’s amazing!

The design philosophy carries through the rest of the app. Despite using Bitwarden daily, I often clicked on the wrong thing when I wanted to do anything other than autofill; in about a month of using 1Password I don’t think I’ve ever misclicked or been confused about the UI. The browser extension just feels snappier than Bitwarden, too. I’m not sure if it’s actually faster or if the design just makes it feel that way.

Functionality-wise, 1Password does everything Bitwarden did for me but slightly better. Bitwarden kicked you to its web interface for some operations (like checking compromised passwords); 1Password has that all built into the app. Instead of editing entries in a fiddly little browser popup, 1Password just summons forth the desktop app and you edit it there. It does a good job of detecting QR codes for TOTPs and offering to save them. I think the only small complaint I have is that the browser extension doesn’t have an autofill keybind. You can rig that up via the desktop app, but it feels like 1Password leans towards you using the UI it adds on login forms. To be fair, that UI works really well, and is very useful when you have multiple accounts on a site. My muscle memory for autofilling is strong, though.

Diving deeper

At this point I’d decided to switch fully to 1Password, so I started digging into what else it could do. The “Watchtower” feature combines a bunch of reporting about passwords (weak, breached, reused, and so on), but also lists sites where 1Password knows you can use passkeys or 2FA and don’t have them set up. I’d previously disabled passkey support in Bitwarden because it just appeared one day and got in the way of me trying to use a YubiKey, but decided to give them a go with 1Password. “Passkeys” is basically just a marketing term for FIDO2’s WebAuthn with automatic discovery bolted on top. The big problem is how you synchronise or export them. It’s all well and good letting your iPhone create a passkey when the Amazon app arbitrarily prompts it to, but what happens when you log in on a different device, or swap to Android, or whatever? Having 1Password deal with them fixes that³.

The passkey flow is very smooth: 1Password pops up an account selector, with obvious options to create a new account or pass the request through to another device like a YubiKey. It’s smart enough to guess the right account most times, even when you’ve got 17 different Google accounts for $reasons. Using them is equally simple: it just shows a popup and you tap to confirm you want to use the passkey. The Watchtower functionality made it really easy to go through and add passkeys everywhere that supports them. The thing I really appreciate is that they make the data that powers it public. It’s obviously partially a marketing thing for them, but it’s also a useful resource they could have kept proprietary.

Passkeys are a bit basic, though. 1Password has many more fun offerings. There’s an entire developer section with various goodies. At first I thought “that’s nice but I won’t use it”, but now I’m using basically everything it offers. The first thing to draw me in was the CLI. It’s pretty straightforward, but like the browser extensions it can nicely integrate with the desktop app so you unlock them all at once, deal with auth prompts in the GUI, and so forth. I have a couple of command-line tools that need passwords (e.g. for dealing with encrypted backups); now instead of prompting for the passwords, they shell out to op read and I authorise it via a popup in the 1Password app. Simple, but a nice quality of life improvement.

Next up there’s a beta feature called “Environments”. This lets you define groups of environment variables within 1Password, and have them exported automatically to certain destinations. At the minute it supports exporting to the AWS SecretsManager, and local .env files. When making a local file it actually makes a named pipe, so the credentials aren’t just sitting on disk (and won’t end up accidentally committed to anything). When the 1Password vault is locked, anything trying to read from the file will cause an authentication popup, much like with the CLI tool. I used to have the mentality that if something could read arbitrary files on disk, it was basically “game over” from a security point of view. Recent events made me realise there’s some value in defence-in-depth there, though, and 1Password provides a nice solution.

Fingerprints + Linux = Sadness

One feature of 1Password had me feeling a bit left out. Instead of entering your vault password to unlock it every time, you can have it invoke the system authentication library. On an iPhone this uses Face ID, on a Mac it can invoke Touch ID, and on Linux it uses Polkit. In the default configuration, Polkit just asks for your local user password, which is not much of an improvement. A fingerprint scanner seemed like the obvious solution here: it’s both a lot more convenient than typing a long password, and provides some assurance that it’s actually me doing the action⁴. Unfortunately, fingerprint readers on Linux seem to be a bit of a sorry affair.

Don’t get me wrong: there’s support. libfprint has a big list of supported devices, but I found it almost impossible to actually find a device I could buy that had one of the listed sensors. Most of them seem to be exclusively built into laptops. A lot of the cheaper devices just use whatever sensor they can get their hands on, so it’s pot luck if you receive a version that will work with libfprint or one that won’t. There’s also not a lot of information beyond that published by libfprint. I guess it makes sense: external fingerprint readers just aren’t a thing most people care about. While that makes me feel all special, it’s somewhat prohibitive to getting an actual working solution.

I’d given up on finding an answer to this when I stumbled upon an article by Scott Laird. He uses a YubiKey Bio to do it, via pam_u2f. The Bio isn’t actually a fingerprint reader: it just has an on-board reader to secure the credentials. The OS doesn’t get involved in the process. But because it can provide a fingerprint-secured U2F key, and pam_u2f can require that key to perform system operations, you basically get the same result. Maybe it’s actually even better than using a “real” fingerprint reader, as the data is secured on the hardware device…

The YubiKey Bio was a bit more pricey than I really wanted, coming in at around £90, but it felt like a worthy investment to add a bit of security and avoid typing a password dozens of times a day. The setup was simple: the official app that you use to enrol fingerprints is packaged in the Arch User Repository, and it worked perfectly. I already had pam_u2f set up as I used a (non-Bio) YubiKey to gate access to sudo, so I just generated a new key on the Bio, updated my config to use that, and added it to the Polkit policy. Now when I need to unlock 1Password or authenticate something, it prompts me to scan my fingerprint. Perfect!

Biometric all the things \o/

One of the other things Scott mentioned in that article was SSH keys. I’d seen 1Password supports acting as an SSH agent, but didn’t really see why I’d want it to. I used a resident key on my old YubiKey, so I didn’t have much to gain from a security point of view. Scott’s article made me realise I could have some big convenience gains, though. Currently every time I need to use the key, I enter a PIN and then physically touch it. I don’t mind this for the most part, but it turns out git-lfs does something like four different requests every time you do a git operation, none of which reuse the same SSH connection for some reason. That gets painful when each request involves a PIN and a touch. I also liked the idea of using pam_rssh for sudo authentication, but didn’t want to have to do the PIN-and-touch dance every time I used it.

You can probably see where this is going: I generated an SSH key in 1Password, and then… spent literal hours disabling all the other SSH agents that were running on my system, and trying to figure out where SSH_AUTH_SOCK was being populated. I didn’t manage to figure that out in the end⁵, and ended up just overriding it to point at 1Password’s agent socket. I added the new key to GitHub, and did the usual ssh git@github.com test, and it worked perfectly. 1Password prompts to allow access to the key, showing the process requesting access, and authorising it requires a fingerprint read:

can haz ssh key?

I’m not sure why Kitty doesn’t get an icon in the prompt; other applications do. You can expand the details section to see the key fingerprint being requested, as well as the exact process name and PID requesting the key. With the proof of concept done, I generated a couple more keys: one for normal SSH, and one for gaining root access using pam_rssh. Using different keys ensures I get prompted for them separately, and means a malicious app couldn’t sneakily ask for a Git key but actually pivot to SSH into a server. Not sure that’s ever likely to be a problem, but it’s basically no additional work for a bit more defence-in-depth, so why not?

I also took a moment to configure pam_u2f for both lightdm and xfce4-screensaver, so I can now log in and unlock my PC with my fingerprint. It’s not quite as smooth as Touch ID on a Mac, but it’s pretty close.

As an aside: this is not the first time I’ve been in this situation. Both Spotify and Todoist have focused on features I don’t want or need (including, but not limited to, pretty much everything branded “AI”), and then hiked the price up afterwards. It’s not quite standard enshittification, but it’s clear that our incentives no longer align properly. ↩︎
Or didn’t, at the time I looked. It now says “All plans” on the website but the docs only exist for business accounts, and there doesn’t seem to be any announcement explaining the change. ↩︎
Having Bitwarden deal with them would also have fixed that, but it got in my way instead of helping me, so… ↩︎
or it’s not me, but I’ll be busy dealing with the presumably-undesired removal of one of my digits, so probably won’t care about whatever is happening on the computer. ↩︎
Although I’m pretty sure the answer starts and ends with “systemd, somehow”. ↩︎