Exposing game servers over Tailscale

2025-12-07T00:00:00Z

I’ve recently been playing a lot of Factorio with a friend. I’ve been hosting, but my desktop computer is behind far too many layers of NAT, and I can’t be bothered dealing with setting up port forwards. Up until today we made do with Steam’s networking support, which in our case ended up relaying the connection via one of their servers. This is amazing as a free, no-hassle service, but the performance was so-so. We’d get random lag spikes, or the initial map download would crawl along at about 1/100th of the speed we should be able to get. We’re both fans of Tailscale though, so maybe there’s an easy solution there?

Tailscale even have an article on sharing a Factorio server but it’s a ten minute long video¹, and focused on setting up an actual dedicated server in Docker rather than just clicking the convenient “Host” button in the game client. What we did instead was:

I shared my desktop’s Tailscale node with my friend, by creating a sharing link in the Admin console
My friend accepted the link, and could then see my machine in their admin panel
I used tailscale lock to sign my friend’s desktop’s node key, as I have tailnet lock enabled
I added a grant to my tailnet’s ACL to permit access from my friend to the specific IP/port on my tailnet:

		{
			"src": ["friend@example.com"],
			"dst": ["100.0.0.42", "fd7a::42"],
			"ip":  ["udp:34197"],
		}

After this, my friend could connect to Factorio by entering the Tailscale IP address, or the Tailscale hostname (as they use MagicDNS). Running tailscale status shows that Tailscale managed to establish a direct connection despite the many layers of NAT involved, and the performance improvements were significant and immediate.

We did a bit of testing, and confirmed that no other services on my machine are accessible. And sharing a machine by default only allows it to accept incoming connections, so I can’t get unwanted access to anything on my friend’s Tailnet, either.

I’ve written before about all the different ways I use Tailscale; this is yet another new way it’s solved a problem for me.

I’m not a fan of video tutorials at the best of times, but especially not when I want to do something as quickly as possible so I can get back to ~~my addiction~~ growing the factory. ↩︎

Building a travel toolkit

2025-01-02T00:00:00Z

The container for my toolkit, a UGREEN “travel accessories” bag

For a while now, whenever I’ve traveled anywhere I’ve dumped a selection of tools into my backpack just in case I need them. Originally this was mostly focused around being able to open and fix my laptop if anything went wrong, but over time has slowly expanded to include other useful tools.

Repeatedly packing these tools and then returning them to where they belonged was tedious, though. I couldn’t just leave them in the backpack as I often needed them for non-travelling purposes, and I didn’t want to just buy duplicate tools that spent most of their life a few meters away from each other, so I ignored the problem and just dealt with the tedium.

Eventually I acquired enough tools that — while not quite duplicates — I wouldn’t miss often if they were kept in the backpack. Building on these I’ve created a little travel toolkit that contains everything I might want (and more) while away.

The base

The biggest challenge I had before was finding a screwdriver set. I have an iFixit Mako set that did the in-and-out-of-the-bag routine for several years. Nothing else covered the range of drivers I wanted for generic electronic tinkering and more chunky work. I finally found one in the form of a Wera Tool-Check PLUS TR-Edition. “TR” stands for “Tool Rebel” and is Wera’s “fan club” brand. Its signature features over the normal Tool-Check PLUS are a fancy fabric case and a 152mm bit extender; but it also comes with a much different set of bits, which is why I picked it up.

Here’s a comparison

Type	Standard version	Tool Rebel edition
Phillips	2x PH1 3x PH2 1x PH3	1x PH00 1x PH0 1x PH1 1x PH2 1x PH3
Pozidrive	None	1x PZ1 3x PZ2
Slotted	1x 5.5mm	1x 4mm 1x 4.5mm 2x 5.5mm 1x 6.5mm
Torx	1x T10 1x T15 1x T20 1x T25 1x T30 1x T40	1x T10 1x T15 1x T20 1x T25 1x T30 1x T40
Security Torx	1x T10 1x T15 1x T20 1x T25 1x T30	1x T25
Hex	1x H3 1x H4 1x H5 1x H6 1x H8	1x H1.5 1x H2 1x H2.5 1x H3 1x H4 1x H6 1x H8

There are only five bits present in the standard version that are missing in the TR edition: 5mm hex (pretty uncommon) and four sizes of security torx (rare). In exchange for those and the removal of a bunch of duplicates, you get two extra phillips sizes (0 and 00, both very useful for electronics and spectacles), some pozidrive bits (extremely common on random hardware/furniture/etc), smaller hex bits (for electronics, 3D printers, and so on), and a few other bits and pieces.

Overall it’s a vastly superior selection for my needs. And while it doesn’t have the full range of bits provided by the iFixit kit, it does cover almost everything I’m ever actually likely to need while travelling, and it’s probably around a third of the size.

The other core part of the toolkit is the bag. I had a UGREEN “travel accessory” bag hanging around unused, and noticed it was almost the exact right size for the Tool-Check. Now, how many other tools could I stuff in there?

All the tools

The array of tools that make up the travel toolkit

The kit can be broken down into a few sections:

Screwdriving

The aforementioned Wera Tool-Check
Its 152mm bit extender

I’ve talked enough about this already, I think, so I’ll spare you any additional commentary on screwdrivers and bits.

Splitting, gripping and cutting

Engineer tweezers
Engineer mini snips
Engineer mini screw removal pliers
Knipex mini waterpump pliers
Two iFixit spudgers (one metal, one plastic)
iFixit jimmy

I have bigger or slightly different versions of these that stay in my normal toolkit. The tweezers and snips are useful in a variety of situations, and the spudgers are handy for getting inside laptops and other devices. The pliers are less useful, but they’re one of those things where when you do need them there aren’t any good alternatives.

Sewing

Two needles
Some black thread
Set of mini clips

You never know when you’re going to rip a seam in something. I find the clips a lot less fiddly than using pins for keeping material in place when I’m trying to sew.

Computering

Retractable ethernet cable
RJ45 coupler
USB-C to RJ45 adapter
Dual USB-A and USB-C thumb drive, with an Arch ISO on it

Sometimes Wi-Fi just doesn’t cut it, or you need to fiddle with a router that doesn’t expose its admin UI over Wi-Fi. The USB-C adapter is for use with my phone, as it’s often easier to move that get the laptop where it needs to be.

I can boot from the thumb drive into an Arch environment, and from there reinstall my laptop from scratch if needed. There’s enough space left over so it can be used to transfer files as well.

Miscellaneousing

Fabric tape measure
Spirit level
Sharpie
Superglue
Spare batteries: 2 CR2032s, 2 AA, 2 AAA

I’m almost certain I won’t use the spirit level, but it’s tiny and I had a spare so it went in. Everything else is just in the “generally handy to have” category.

Putting it all together

The nicely-organised side of the toolkit

The Tool-Check PLUS fits almost perfectly into one side of the UGREEN bag, leaving a little wiggle room along the side for the longer parts like spudgers. The middle pockets can’t fit much in, but keep the batteries and sewing bits out of the way. Everything else is in a big zip-up compartment in the other side, which is slightly messy but still easy enough to dig through to find whatever I need.

The complete kit weighs in at around 1.2KG, so it’s not exactly lightweight, but it goes in a bag with a heavy laptop and all of its peripherals so it’s not as noticeable as it might otherwise be.

It remains to be seen how much use I’ll actually get out of any of this. Maybe I’ll put a bit of paper in so that I can track how often I use each tool…

Chameth.com - posts like exposing-game-servers-over-tailscale, travel-toolkit but not debugging-beyond-the-debugger, tailscale-docker-gotcha, why-you-should-be-using-https