Chameth.com - posts like how-i-use-tailscale, intro-to-containers but not debugging-beyond-the-debugger, migrating-from-github-to-forgejo, why-you-should-be-using-https

The Case of the Unchanging Config

2026-04-09T00:00:00Z

Last week I was attempting to make it so I could share pictures on IRC directly from my client. This sounds simple, but it involves a bouncer¹ that proxies the request to a standalone image hosting service that I had to modify to be compatible. At one point my testing loop was:

Make a change to the hosting service
Commit it
Tag a new release
Wait for it to build
Update the version I’m running on my server
Reconfigure the bouncer to pass the new parameter or change the URL or whatever
Try uploading a photo from my phone
Realise I’ve overlooked something and go back to step one

I could have set up a local copy of everything and tested it sensibly. I should have set up a local copy of everything and tested it sensibly. But it seemed like such a trivial change, and setting up the whole environment seemed like such a pain. After the third or so iteration of failure I was pretty annoyed with myself, computers, and basically everything.

My biggest annoyance was that my bouncer would not pick up the new URL from the config when I changed it. It’s meant to reload the config when it receives a SIGHUP, and it claimed to in the logs, but I could clearly see it was still hitting the old URL. Restarting the bouncer to update the config is a pain, as it disconnects me from all the IRC networks, and has to reconnect to them all, reauthenticate, etc. It also mildly spams everyone who shares a channel with me².

When I finally got everything working I had a look at the bouncer source, and thought I’d spotted the issue. I raised a bug report, ending in this remark:

It looks like the config is reloaded properly, but the handler for uploads is created once at startup and has its own copy of the uploader, so effectively snapshots the config to whatever it is at startup:

fileUploadHandler := http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
    cfg := srv.Config()
    h := fileupload.Handler{
        Uploader:    cfg.FileUploader,
        DB:          db,
        Auth:        cfg.Auth,
        HTTPOrigins: cfg.HTTPOrigins,
    }
    h.ServeHTTP(w, r)
})

I’m not quite sure what I thought I saw there, but that’s not right. I want to call it a hallucination, but that feels like a very overloaded word these days. I guess I was just seeing what I wanted to see, and that was a good excuse to stop investigating. Still, even if I misidentified the cause, the bug was still present, right? … Right?

The Science of Deduction

When the developer got back and said he couldn’t reproduce my issue, I went back to my install and immediately reproduced it. With a calmer head, I figured it was probably something with my particular set up. First thing to check: am I actually running the version I think I am?

Unfortunately the bouncer doesn’t actually seem to expose the version anywhere that I can see. It’s not in the logs, it doesn’t have a -version flag, and none of the IRC-based status commands seem to include it. But I know it’s a Go app, and I know Go embeds the version information. go version -m <binary> will dump it all out, but the binary is inside a Docker image, and the Docker image is one of my nice, minimal, artisanal ones so doesn’t ship a go binary. No problem, docker compose cp bouncer:/bnc ./bnc yoinks the binary out of the container, and then dumping the version shows that, yes, I am running the version I thought I was. Hmm.

The next tool I reached for in my toolbox was strace. Maybe it’s not actually reading the file for some reason? I immediately executed strace -p <pid> -e trace=openat,open,read,pread64 -f without having to look any part of that up. Yep. Definitely. Then I edited the config, HUP’d the bouncer, and saw that it was… reading the config file. As it’s meant to. By default strace truncates strings to 32 bytes, so I couldn’t actually see the line I’d changed. Some more definitely-not-RTFMing later, and rerunning it with an extra -s 65536 let me see the full config. Surprise! The config hadn’t changed!

To confirm my findings, I used docker compose cp again, this time yoinking the config file from inside the container. The inside config file was definitely different to the outside config file. What? My hypothesis at this point was “something something Docker nonsense”. I mount the config as read-only, and was wondering if that meant that Docker was doing something weird instead of just bind mounting it. A quick trip to /proc/<pid>/mounts showed that it was, in fact, not doing anything weird, and was just bind mounting it.

If the file is bind mounted, then surely it’s the same file? I ran stat on the file on the host, noted the inode number, then pondered how to actually run stat on the file inside the container, given the aforementioned awkwardly minimal image. The solution was easy: access it via /proc/<pid>/root/. I could’ve saved myself a bunch of docker compose cp if I’d thought about that earlier. Oh well. The inode of that file was different. What?

The answer was DNS. It’s always DNS. Oh, sorry, force of habit. I meant the answer was vim. I was editing the config in vim, and when it saves files, by default, it writes the new content to a temporary file and does an atomic rename. That’s normally a good thing: it prevents corruption if the write fails midway through³. In this case, though, that means the new file has a new inode. Bind mounting a file binds to the inode, so the container just keeps clutching onto the original config from when it was started, blissfully unaware that the party has relocated down the street.

This problem is likely to happen whenever you bind mount a file into a container. When I mentioned this to a friend, he immediately responded “oh yeah, never do that”, and went on to describe the horrible hacks he’s had to add to Ansible to sidestep the issue. The nicer solution is to just bind mount an entire directory if you can, as then it doesn’t matter what happens to the files within it. I really like having the config files sat alongside the Docker compose files, though; having to create a directory just to work around some bind mount weirdness upsets me.

Now I knew what the problem was, I found there was an issue raised against Docker twelve years ago⁴. The first response was “that’s expected”, and I fully agree with the author: “respectfully, that might be expected by you, but it was not expected by me”!⁵ As a result of the issue they added a nice note to the docs:

Note: Many tools used to edit files including vi and sed --in-place may result in an inode change. Since Docker v1.1.0, this will produce an error such as “sed: cannot rename ./sedKdJ9Dy: Device or resource busy”. In the case where you want to edit the mounted file, it is often easiest to instead mount the parent directory.

But in the intervening twelve years, both the note and the functionality described have gone missing. Ho-hum.

I found it interesting how I’ve only just hit this problem, given how long I’ve used Docker. But I realised that almost everything I run I’m happy to just restart. Cattle, not pets, and so on. My IRC bouncer is one of the few exceptions to that. The only other thing I regularly hot reloaded was Centauri, my reverse proxy, but that had a whole config directory mounted because it was shared between containers, so nicely sidestepped the foot-gun.

So lesson learnt: check for weird bind mount issues before raising issues about config hot reloading. It’ll join the esteemed company of “maybe the drive is full and causing completely unrelated problems?”, “perhaps everything is dog slow because the kernel ran out of entropy?”, and “did systemd sneakily take over that functionality while you weren’t looking?” in the troubleshooting checklist.

An IRC bouncer is basically an always-on proxy. It connects to the IRC networks for you, then your clients connect to your bouncer. The bouncer can then send incoming messages to all your different clients, cache them when you’re offline and replay them later, and lots of other nice things people take for granted in their chat apps these days. ↩︎
Join/part/quit spam is part of IRC, and clients have ways of handling it, but I still feel bad about doing it excessively. ↩︎
You can disable this in vim by setting backupcopy=yes. Good luck redoing all the debugging if you ever accidentally remove that from your vimrc, though! ↩︎
Which is weird, because Docker can’t possibly be that old. That would make me much older than I’m prepared to accept. ↩︎
If you read the thread they didn’t actually mean to sound so dismissive, but it’s still pretty funny. “Yes, it’s expected that the foot-gun causes your foot to hurt. Duh. What did you expect?” ↩︎

An interesting Tailscale + Docker gotcha

2026-01-29T00:00:00Z

As I’ve written about before, I use Tailscale for a lot of things. I thought I had it set up in a reasonably secure manner, but I recently noticed a problem.

I use Tailscale’s ACLs to limit what each node can access, based on the tags I apply to it. So an app node can’t access anything via Tailscale, while an integration or server node can access things tagged with either app or integration. This is expressed pretty simply in the Tailscale ACL JSON:

{
	"tagOwners": {
		// Servers that can be SSH'd into
		"tag:server": [],
		// Applications that are exposed on tailscale but never connect out
		"tag:app": [],
		// Things which talk to other services over tailscale (connecting to apps etc)
		"tag:integration": [],
	},
	"grants": [
		{
			// Users can access everything
			"src": ["autogroup:member"],
			"dst": ["*"],
			"ip":  ["*"],
		},
		{
			// Servers and integrations can access integrations and apps
			"src": ["tag:server", "tag:integration"],
			"dst": ["tag:integration", "tag:app"],
			"ip":  ["*"],
		},
	],
}

Over the past week I’ve been setting up a private Forgejo instance behind Tailscale, complete with an actions runner that runs things using a docker-in-docker container. I didn’t want the runner knowing anything about Tailscale, so I had it configured to speak to Forgejo direct over HTTP (forgejo:3000) instead of using full Tailscale HTTPS URL that I use when accessing it (http://git.example-net.ts.net/)¹.

Everything was going fine, until I forgot to do that translation… and it worked. My Forgejo action runners could access anything on my tailnet. I run several things on Tailscale that just have authentication turned off, on the basis that only authorised devices can access them. Things like the admin interface for this website. I definitely didn’t intend for any workflow I run on my git server to have access to edit my website!

This wasn’t just limited to Forgejo, either. Any docker container I was running could access the tailnet. In hindsight it’s fairly obvious why: the host is running Tailscale, connected as a node tagged with my server tag. That creates a tailscale0 interface, and automagically sets up iptables rules to route Tailscale traffic over the interface. Docker also automagically sets up iptables rules to bridge traffic, and apparently these two sets of rules interact in such a way that traffic from Docker containers is allowed to route via the tailscale0 interface.

I say it’s fairly obvious in hindsight — there’s no reason why Docker would special case any particular host interface after all — but it still feels pretty surprising. Because both bits of software inject their own iptables rules, I never really had a good mental model for how they interact. The host Tailscale node was a completely separate building block to Docker. It would be a pain to use either of them if they didn’t do these rules, but it’s also one of the reasons I don’t really like “magical” things².

There are lots of ways to fix this, but none of them feel particularly great. You can configure both Tailscale and Docker to not automatically fiddle with iptables and handle the rules yourself, but I really hate dealing with iptables³. As a stopgap I did hold my nose and add some iptables rules to drop traffic to the tailscale0 interface if it originated from the IP ranges that Docker was configured to use:

iptables -I DOCKER-USER -s 192.168.0.0/16 -o tailscale0 -j DROP
iptables -I DOCKER-USER -s 172.17.0.0/12 -o tailscale0 -j DROP

The DOCKER-USER chain is a nice little escape hatch; it comes before the main auto-generated DOCKER chain, and Docker leaves the rules in it alone.

So I added these rules, and felt pretty good about myself, and then… everything started breaking in weird ways. After some debugging I realised the problem was DNS⁴. The server’s DNS resolver is 100.100.100.100, a special Tailscale address. This is so that it can resolve tailnet hostnames via MagicDNS (and so I don’t have to configure my custom DNS servers manually on each device; Tailscale does it for me). My new iptables rules inadvertently dropped all the DNS packets coming from docker containers. D’oh.

Obviously the solution here is to double down and add MORE iptables rules:

iptables -I DOCKER-USER -s 192.168.0.0/16 -d 100.100.100.100 -o tailscale0 -j ACCEPT
iptables -I DOCKER-USER -s 172.17.0.0/12 -d 100.100.100.100 -o tailscale0 -j ACCEPT

This got DNS working again, but it all feels a bit gross. Not least because to actually make these persist you need to use iptables-save, and then you also get all the rules that both Docker and Tailscale have inserted. I came across a script to filter out the Docker ones, but… yuck⁵.

I realised a cleaner idea might just be to lock down what server tagged nodes could access within Tailscale itself. That way I can avoid touching iptables at all. It’s handy to be able to curl services from the host when debugging, but it’s not really necessary. So I removed that access, and… stuff broke again. I’m using my Forgejo instance as a registry for some of the docker images I run, so the docker daemon needs to be able to reach it. I ended up making a new tag for infrastructure, which can be accessed from server devices. This does still allow all the docker containers to reach Forgejo, but I already have it set up with appropriate access controls and public/private repository splits. Forgejo is a service designed to run publicly, so this seems a reasonable trade-off for convenience. I used the tests feature of Tailscale’s ACL config to make sure I’d got the rules right:

{
	"tests": [
		{
			// Servers can only access infrastructure
			"src":   "tag:server",
			"proto": "tcp",
			"allow": [
				"tag:infrastructure:8080",
			],
			"deny": [
				"100.84.16.43:8080",
				"me@example.com:8080",
				"tag:server:8080",
				"tag:app:8080",
				"tag:integration:8080",
			],
		},
	],
}

The whole situation still feels a bit messy. If I ever get around to switching to nftables I might loop back and manually craft some rules for routing traffic, instead of leaving Tailscale and Docker to do their own thing.

I discovered later on that logging into the container registry at forgejo:3000 actually issued a redirect to https://git.example-net.ts.net/ so this was all basically for naught… ↩︎
I didn’t use Tailscale’s MagicDNS for a long time just because the word “magic” put me off. Only when I eventually got around to learning how it worked, and seeing that it wasn’t really that magical under the hood, did I change my mind. ↩︎
nftables seems far better in lots of ways, but I can’t really be bothered migrating. Maybe next time I reimage the server for whatever reason… ↩︎
It’s always DNS… ↩︎
Again, nftables would almost certainly help here. It actually has (gasp) configuration files. But again, I really didn’t want to spend the time migrating. ↩︎

Exposing game servers over Tailscale

2025-12-07T00:00:00Z

I’ve recently been playing a lot of Factorio with a friend. I’ve been hosting, but my desktop computer is behind far too many layers of NAT, and I can’t be bothered dealing with setting up port forwards. Up until today we made do with Steam’s networking support, which in our case ended up relaying the connection via one of their servers. This is amazing as a free, no-hassle service, but the performance was so-so. We’d get random lag spikes, or the initial map download would crawl along at about 1/100th of the speed we should be able to get. We’re both fans of Tailscale though, so maybe there’s an easy solution there?

Tailscale even have an article on sharing a Factorio server but it’s a ten minute long video¹, and focused on setting up an actual dedicated server in Docker rather than just clicking the convenient “Host” button in the game client. What we did instead was:

I shared my desktop’s Tailscale node with my friend, by creating a sharing link in the Admin console
My friend accepted the link, and could then see my machine in their admin panel
I used tailscale lock to sign my friend’s desktop’s node key, as I have tailnet lock enabled
I added a grant to my tailnet’s ACL to permit access from my friend to the specific IP/port on my tailnet:

		{
			"src": ["friend@example.com"],
			"dst": ["100.0.0.42", "fd7a::42"],
			"ip":  ["udp:34197"],
		}

After this, my friend could connect to Factorio by entering the Tailscale IP address, or the Tailscale hostname (as they use MagicDNS). Running tailscale status shows that Tailscale managed to establish a direct connection despite the many layers of NAT involved, and the performance improvements were significant and immediate.

We did a bit of testing, and confirmed that no other services on my machine are accessible. And sharing a machine by default only allows it to accept incoming connections, so I can’t get unwanted access to anything on my friend’s Tailnet, either.

I’ve written before about all the different ways I use Tailscale; this is yet another new way it’s solved a problem for me.

I’m not a fan of video tutorials at the best of times, but especially not when I want to do something as quickly as possible so I can get back to ~~my addiction~~ growing the factory. ↩︎

Securing all the things with 1Password

2025-11-26T00:00:00Z

For many years I’ve been a keen user of Bitwarden. Recently I’ve had a lot of small paper-cut problems. The browser extension was redesigned and just doesn’t quite work how I expect any more. The prompt to save new login info misfired more than it worked. The mobile app stopped background refreshing properly. No one issue was enough to make me want to leave Bitwarden, but it definitely wasn’t sparking joy. Then there were rumblings about a price increase. I don’t think they’ve announced anything, but the numbers I saw were a jump from $10/year to $24/year. A nearly 2.5x price increase for a tool that was actively getting worse over time did not seem like a good deal to me¹.

I spent a while looking at alternatives, but there were very few that met my needs. Nordpass is highly praised but doesn’t support saving TOTP codes on personal plans². All the nice open-source/self-hosted solutions fall down when you want reliable synchronisation to an iOS device (which is fair enough). Proton Pass looked like it had all the features, but the pricing was asinine. Different pages showed different prices, the prices were introductory rates that jumped up on renewal, but that was hidden away in small print, etc. Yuck. The prices are also pretty high. More or less the same as 1Password, which I’d been discounting due to the cost, until now…

After eliminating basically every other option, I took a serious look at 1Password. It seemed to tick all the right boxes, I’d often heard good things about it, and it wouldn’t actually be much more expensive than Bitwarden if they went ahead with the rumoured price increase. I started a trial to give it a test.

Initial impressions

1Password is — as you’d expect for something that originated as a Mac app — very pretty. But it’s also highly functional. The looks don’t get in the way, they’re nice extras on top. When it’s locked, you get a large version of the 1Password logo, which is a front-on view of the barrel of a lock, next to the password input. When you authenticate, the barrel turns as though you’d put a key in and rotated it, and then the background splits in two and opens like a vault door. Does a password manager need to do that? No. Does it make me a little bit happy every time I see it? Yes. Look at it, it’s amazing!

The design philosophy carries through the rest of the app. Despite using Bitwarden daily, I often clicked on the wrong thing when I wanted to do anything other than autofill; in about a month of using 1Password I don’t think I’ve ever misclicked or been confused about the UI. The browser extension just feels snappier than Bitwarden, too. I’m not sure if it’s actually faster or if the design just makes it feel that way.

Functionality-wise, 1Password does everything Bitwarden did for me but slightly better. Bitwarden kicked you to its web interface for some operations (like checking compromised passwords); 1Password has that all built into the app. Instead of editing entries in a fiddly little browser popup, 1Password just summons forth the desktop app and you edit it there. It does a good job of detecting QR codes for TOTPs and offering to save them. I think the only small complaint I have is that the browser extension doesn’t have an autofill keybind. You can rig that up via the desktop app, but it feels like 1Password leans towards you using the UI it adds on login forms. To be fair, that UI works really well, and is very useful when you have multiple accounts on a site. My muscle memory for autofilling is strong, though.

Diving deeper

At this point I’d decided to switch fully to 1Password, so I started digging into what else it could do. The “Watchtower” feature combines a bunch of reporting about passwords (weak, breached, reused, and so on), but also lists sites where 1Password knows you can use passkeys or 2FA and don’t have them set up. I’d previously disabled passkey support in Bitwarden because it just appeared one day and got in the way of me trying to use a YubiKey, but decided to give them a go with 1Password. “Passkeys” is basically just a marketing term for FIDO2’s WebAuthn with automatic discovery bolted on top. The big problem is how you synchronise or export them. It’s all well and good letting your iPhone create a passkey when the Amazon app arbitrarily prompts it to, but what happens when you log in on a different device, or swap to Android, or whatever? Having 1Password deal with them fixes that³.

The passkey flow is very smooth: 1Password pops up an account selector, with obvious options to create a new account or pass the request through to another device like a YubiKey. It’s smart enough to guess the right account most times, even when you’ve got 17 different Google accounts for $reasons. Using them is equally simple: it just shows a popup and you tap to confirm you want to use the passkey. The Watchtower functionality made it really easy to go through and add passkeys everywhere that supports them. The thing I really appreciate is that they make the data that powers it public. It’s obviously partially a marketing thing for them, but it’s also a useful resource they could have kept proprietary.

Passkeys are a bit basic, though. 1Password has many more fun offerings. There’s an entire developer section with various goodies. At first I thought “that’s nice but I won’t use it”, but now I’m using basically everything it offers. The first thing to draw me in was the CLI. It’s pretty straightforward, but like the browser extensions it can nicely integrate with the desktop app so you unlock them all at once, deal with auth prompts in the GUI, and so forth. I have a couple of command-line tools that need passwords (e.g. for dealing with encrypted backups); now instead of prompting for the passwords, they shell out to op read and I authorise it via a popup in the 1Password app. Simple, but a nice quality of life improvement.

Next up there’s a beta feature called “Environments”. This lets you define groups of environment variables within 1Password, and have them exported automatically to certain destinations. At the minute it supports exporting to the AWS SecretsManager, and local .env files. When making a local file it actually makes a named pipe, so the credentials aren’t just sitting on disk (and won’t end up accidentally committed to anything). When the 1Password vault is locked, anything trying to read from the file will cause an authentication popup, much like with the CLI tool. I used to have the mentality that if something could read arbitrary files on disk, it was basically “game over” from a security point of view. Recent events made me realise there’s some value in defence-in-depth there, though, and 1Password provides a nice solution.

Fingerprints + Linux = Sadness

One feature of 1Password had me feeling a bit left out. Instead of entering your vault password to unlock it every time, you can have it invoke the system authentication library. On an iPhone this uses Face ID, on a Mac it can invoke Touch ID, and on Linux it uses Polkit. In the default configuration, Polkit just asks for your local user password, which is not much of an improvement. A fingerprint scanner seemed like the obvious solution here: it’s both a lot more convenient than typing a long password, and provides some assurance that it’s actually me doing the action⁴. Unfortunately, fingerprint readers on Linux seem to be a bit of a sorry affair.

Don’t get me wrong: there’s support. libfprint has a big list of supported devices, but I found it almost impossible to actually find a device I could buy that had one of the listed sensors. Most of them seem to be exclusively built into laptops. A lot of the cheaper devices just use whatever sensor they can get their hands on, so it’s pot luck if you receive a version that will work with libfprint or one that won’t. There’s also not a lot of information beyond that published by libfprint. I guess it makes sense: external fingerprint readers just aren’t a thing most people care about. While that makes me feel all special, it’s somewhat prohibitive to getting an actual working solution.

I’d given up on finding an answer to this when I stumbled upon an article by Scott Laird. He uses a YubiKey Bio to do it, via pam_u2f. The Bio isn’t actually a fingerprint reader: it just has an on-board reader to secure the credentials. The OS doesn’t get involved in the process. But because it can provide a fingerprint-secured U2F key, and pam_u2f can require that key to perform system operations, you basically get the same result. Maybe it’s actually even better than using a “real” fingerprint reader, as the data is secured on the hardware device…

The YubiKey Bio was a bit more pricey than I really wanted, coming in at around £90, but it felt like a worthy investment to add a bit of security and avoid typing a password dozens of times a day. The setup was simple: the official app that you use to enrol fingerprints is packaged in the Arch User Repository, and it worked perfectly. I already had pam_u2f set up as I used a (non-Bio) YubiKey to gate access to sudo, so I just generated a new key on the Bio, updated my config to use that, and added it to the Polkit policy. Now when I need to unlock 1Password or authenticate something, it prompts me to scan my fingerprint. Perfect!

Biometric all the things \o/

One of the other things Scott mentioned in that article was SSH keys. I’d seen 1Password supports acting as an SSH agent, but didn’t really see why I’d want it to. I used a resident key on my old YubiKey, so I didn’t have much to gain from a security point of view. Scott’s article made me realise I could have some big convenience gains, though. Currently every time I need to use the key, I enter a PIN and then physically touch it. I don’t mind this for the most part, but it turns out git-lfs does something like four different requests every time you do a git operation, none of which reuse the same SSH connection for some reason. That gets painful when each request involves a PIN and a touch. I also liked the idea of using pam_rssh for sudo authentication, but didn’t want to have to do the PIN-and-touch dance every time I used it.

You can probably see where this is going: I generated an SSH key in 1Password, and then… spent literal hours disabling all the other SSH agents that were running on my system, and trying to figure out where SSH_AUTH_SOCK was being populated. I didn’t manage to figure that out in the end⁵, and ended up just overriding it to point at 1Password’s agent socket. I added the new key to GitHub, and did the usual ssh git@github.com test, and it worked perfectly. 1Password prompts to allow access to the key, showing the process requesting access, and authorising it requires a fingerprint read:

can haz ssh key?

I’m not sure why Kitty doesn’t get an icon in the prompt; other applications do. You can expand the details section to see the key fingerprint being requested, as well as the exact process name and PID requesting the key. With the proof of concept done, I generated a couple more keys: one for normal SSH, and one for gaining root access using pam_rssh. Using different keys ensures I get prompted for them separately, and means a malicious app couldn’t sneakily ask for a Git key but actually pivot to SSH into a server. Not sure that’s ever likely to be a problem, but it’s basically no additional work for a bit more defence-in-depth, so why not?

I also took a moment to configure pam_u2f for both lightdm and xfce4-screensaver, so I can now log in and unlock my PC with my fingerprint. It’s not quite as smooth as Touch ID on a Mac, but it’s pretty close.

As an aside: this is not the first time I’ve been in this situation. Both Spotify and Todoist have focused on features I don’t want or need (including, but not limited to, pretty much everything branded “AI”), and then hiked the price up afterwards. It’s not quite standard enshittification, but it’s clear that our incentives no longer align properly. ↩︎
Or didn’t, at the time I looked. It now says “All plans” on the website but the docs only exist for business accounts, and there doesn’t seem to be any announcement explaining the change. ↩︎
Having Bitwarden deal with them would also have fixed that, but it got in my way instead of helping me, so… ↩︎
or it’s not me, but I’ll be busy dealing with the presumably-undesired removal of one of my digits, so probably won’t care about whatever is happening on the computer. ↩︎
Although I’m pretty sure the answer starts and ends with “systemd, somehow”. ↩︎

Avoiding the Consequences of Dumb Laws with Tailscale

2025-09-30T00:00:00Z

More and more sites are implementing privacy-invading age checks or just completely blocking the UK thanks to the Online Safety Act.

Protecting kids from some content online is certainly a noble goal, but the asinine guidance from Ofcom, threats of absolutely disproportionate fines, and the stupidly broad categories of content have resulted in companies just giving up or going through a tick-box exercise that offers very little protection but lots of inconvenience and a complete invasion of privacy.

Instead of uploading my ID to some third party company, I’ve taken to proxying my traffic through to a country that doesn’t have such stupid laws. Thankfully, Tailscale makes this really easy. I’ve discussed how I use Tailscale before, but not really covered app connectors. I find Tailscale’s description of these pretty confusing, but they basically amount to automatic, DNS-based subnet routing configurations (or, to put it another way, a per-website exit node). You can safely ignore all references to ‘SaaS apps’ in their docs.

I create a custom app connector, and give it the domains to be included:

App configuration in the Tailscale admin console

Tailscale then magically resolves those domains, and has the ‘connector’ advertise routes for them. Any client that accepts routes will start sending requests to the connector, which passes them onto the Internet at large. Any other traffic is left alone, unlike when you use an exit node.

The special bit here is how you can specify wildcard domains. Tailscale proxies the DNS requests from clients (so it can inject responses for nodes on your tailnet), which means it can dynamically update the routes as you resolve new domains. I tried to set this up more manually, and quickly came unstuck: despite using the same DNS servers, my server and my desktop would get different responses for the same query as it varied by geography. Trying to get the full set of IPs (and keeping them updated) would have been a nightmare. Tailscale expanding the wildcards nicely sidesteps all of that.

At first I was just proxying the traffic to one of my servers, but just today I added a new connector for Imgur and found I was still blocked, just for different reasons. They not only block my entire country but also a load of known datacenter IP ranges. Hmph. I fixed this by hacking up a new side project: tsv. It’s a simple Go app that accepts traffic from the tailnet (advertising itself as both an app connector and an exit node), and passes it on to another VPN.

There are lots of other ways you could accomplish this, but this makes it so all my devices can still access services without any additional configuration. As long as Tailscale is installed, the Internet will still work as it’s meant to, without all the nonsense. If I come across a site that doesn’t work, adding it is trivial: I just make a new app connector in Tailscale.

Obvious disclaimer: the laws in the UK are binding on the service providers, not the end user. Doing this sort of thing in other countries might be illegal. I don’t know; do your own research! Also all of this is a workaround for something that should be fixed at a legislative level, but I’m not holding my breath.