Chameth.com - posts like understanding-docker-volume-mounts, why-you-should-be-using-https but not g15-ram-upgrade, simple-backups-restic-hetzner

The Case of the Unchanging Config

2026-04-09T00:00:00Z

Last week I was attempting to make it so I could share pictures on IRC directly from my client. This sounds simple, but it involves a bouncer¹ that proxies the request to a standalone image hosting service that I had to modify to be compatible. At one point my testing loop was:

Make a change to the hosting service
Commit it
Tag a new release
Wait for it to build
Update the version I’m running on my server
Reconfigure the bouncer to pass the new parameter or change the URL or whatever
Try uploading a photo from my phone
Realise I’ve overlooked something and go back to step one

I could have set up a local copy of everything and tested it sensibly. I should have set up a local copy of everything and tested it sensibly. But it seemed like such a trivial change, and setting up the whole environment seemed like such a pain. After the third or so iteration of failure I was pretty annoyed with myself, computers, and basically everything.

My biggest annoyance was that my bouncer would not pick up the new URL from the config when I changed it. It’s meant to reload the config when it receives a SIGHUP, and it claimed to in the logs, but I could clearly see it was still hitting the old URL. Restarting the bouncer to update the config is a pain, as it disconnects me from all the IRC networks, and has to reconnect to them all, reauthenticate, etc. It also mildly spams everyone who shares a channel with me².

When I finally got everything working I had a look at the bouncer source, and thought I’d spotted the issue. I raised a bug report, ending in this remark:

It looks like the config is reloaded properly, but the handler for uploads is created once at startup and has its own copy of the uploader, so effectively snapshots the config to whatever it is at startup:

fileUploadHandler := http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
    cfg := srv.Config()
    h := fileupload.Handler{
        Uploader:    cfg.FileUploader,
        DB:          db,
        Auth:        cfg.Auth,
        HTTPOrigins: cfg.HTTPOrigins,
    }
    h.ServeHTTP(w, r)
})

I’m not quite sure what I thought I saw there, but that’s not right. I want to call it a hallucination, but that feels like a very overloaded word these days. I guess I was just seeing what I wanted to see, and that was a good excuse to stop investigating. Still, even if I misidentified the cause, the bug was still present, right? … Right?

The Science of Deduction

When the developer got back and said he couldn’t reproduce my issue, I went back to my install and immediately reproduced it. With a calmer head, I figured it was probably something with my particular set up. First thing to check: am I actually running the version I think I am?

Unfortunately the bouncer doesn’t actually seem to expose the version anywhere that I can see. It’s not in the logs, it doesn’t have a -version flag, and none of the IRC-based status commands seem to include it. But I know it’s a Go app, and I know Go embeds the version information. go version -m <binary> will dump it all out, but the binary is inside a Docker image, and the Docker image is one of my nice, minimal, artisanal ones so doesn’t ship a go binary. No problem, docker compose cp bouncer:/bnc ./bnc yoinks the binary out of the container, and then dumping the version shows that, yes, I am running the version I thought I was. Hmm.

The next tool I reached for in my toolbox was strace. Maybe it’s not actually reading the file for some reason? I immediately executed strace -p <pid> -e trace=openat,open,read,pread64 -f without having to look any part of that up. Yep. Definitely. Then I edited the config, HUP’d the bouncer, and saw that it was… reading the config file. As it’s meant to. By default strace truncates strings to 32 bytes, so I couldn’t actually see the line I’d changed. Some more definitely-not-RTFMing later, and rerunning it with an extra -s 65536 let me see the full config. Surprise! The config hadn’t changed!

To confirm my findings, I used docker compose cp again, this time yoinking the config file from inside the container. The inside config file was definitely different to the outside config file. What? My hypothesis at this point was “something something Docker nonsense”. I mount the config as read-only, and was wondering if that meant that Docker was doing something weird instead of just bind mounting it. A quick trip to /proc/<pid>/mounts showed that it was, in fact, not doing anything weird, and was just bind mounting it.

If the file is bind mounted, then surely it’s the same file? I ran stat on the file on the host, noted the inode number, then pondered how to actually run stat on the file inside the container, given the aforementioned awkwardly minimal image. The solution was easy: access it via /proc/<pid>/root/. I could’ve saved myself a bunch of docker compose cp if I’d thought about that earlier. Oh well. The inode of that file was different. What?

The answer was DNS. It’s always DNS. Oh, sorry, force of habit. I meant the answer was vim. I was editing the config in vim, and when it saves files, by default, it writes the new content to a temporary file and does an atomic rename. That’s normally a good thing: it prevents corruption if the write fails midway through³. In this case, though, that means the new file has a new inode. Bind mounting a file binds to the inode, so the container just keeps clutching onto the original config from when it was started, blissfully unaware that the party has relocated down the street.

This problem is likely to happen whenever you bind mount a file into a container. When I mentioned this to a friend, he immediately responded “oh yeah, never do that”, and went on to describe the horrible hacks he’s had to add to Ansible to sidestep the issue. The nicer solution is to just bind mount an entire directory if you can, as then it doesn’t matter what happens to the files within it. I really like having the config files sat alongside the Docker compose files, though; having to create a directory just to work around some bind mount weirdness upsets me.

Now I knew what the problem was, I found there was an issue raised against Docker twelve years ago⁴. The first response was “that’s expected”, and I fully agree with the author: “respectfully, that might be expected by you, but it was not expected by me”!⁵ As a result of the issue they added a nice note to the docs:

Note: Many tools used to edit files including vi and sed --in-place may result in an inode change. Since Docker v1.1.0, this will produce an error such as “sed: cannot rename ./sedKdJ9Dy: Device or resource busy”. In the case where you want to edit the mounted file, it is often easiest to instead mount the parent directory.

But in the intervening twelve years, both the note and the functionality described have gone missing. Ho-hum.

I found it interesting how I’ve only just hit this problem, given how long I’ve used Docker. But I realised that almost everything I run I’m happy to just restart. Cattle, not pets, and so on. My IRC bouncer is one of the few exceptions to that. The only other thing I regularly hot reloaded was Centauri, my reverse proxy, but that had a whole config directory mounted because it was shared between containers, so nicely sidestepped the foot-gun.

So lesson learnt: check for weird bind mount issues before raising issues about config hot reloading. It’ll join the esteemed company of “maybe the drive is full and causing completely unrelated problems?”, “perhaps everything is dog slow because the kernel ran out of entropy?”, and “did systemd sneakily take over that functionality while you weren’t looking?” in the troubleshooting checklist.

An IRC bouncer is basically an always-on proxy. It connects to the IRC networks for you, then your clients connect to your bouncer. The bouncer can then send incoming messages to all your different clients, cache them when you’re offline and replay them later, and lots of other nice things people take for granted in their chat apps these days. ↩︎
Join/part/quit spam is part of IRC, and clients have ways of handling it, but I still feel bad about doing it excessively. ↩︎
You can disable this in vim by setting backupcopy=yes. Good luck redoing all the debugging if you ever accidentally remove that from your vimrc, though! ↩︎
Which is weird, because Docker can’t possibly be that old. That would make me much older than I’m prepared to accept. ↩︎
If you read the thread they didn’t actually mean to sound so dismissive, but it’s still pretty funny. “Yes, it’s expected that the foot-gun causes your foot to hurt. Duh. What did you expect?” ↩︎

Understanding Docker volume mounts

2019-04-01T00:00:00Z

The Docker project logo

One thing that always confuses me with Docker is how exactly mounting volumes behaves. At a basic level it’s fairly straight forward: you declare a volume in a Dockerfile, and then either explicitly mount something there or docker automatically creates an anonymous volume for you. Done. But it turns out there’s quite a few edge cases…

Changing ownership of the folder

Perhaps the most common operation done on a Docker volume other than simply mounting it is trying to change the ownership of the directory. If your Docker process runs as a certain user you probably want the directory to be writable by that user.

At first we might try something like:

FROM alpine
RUN adduser -D -u 1113 test123
USER test123
VOLUME /testing

But changing the user doesn’t seem to have any effect on the volume. Why? Checking the docs for the USER instruction shows that only affects certain future operations — namely RUN, CMD, and ENTRYPOINT. It doesn’t affect the VOLUME instruction; if it did, you’d probably just get a permission denied error unless the user you switch to had privileges to create mount points.

OK, so instead we might try using the good old chown command:

FROM alpine
RUN adduser -D -u 1113 test123
VOLUME /testing
RUN chown test123 /testing

But again, the directory is just owned by root at runtime. Back to the docs, this time for the VOLUME instruction and towards the bottom is this little tidbit:

Changing the volume from within the Dockerfile: If any build steps change the data within the volume after it has been declared, those changes will be discarded.

As soon as Docker hits the VOLUME instruction the directory becomes a mount point, and anything we do to the temporary volume mounted there is discarded during the build process. So we have to change the ownership before the instruction, which may seem a little counter-intuitive:

FROM alpine
RUN adduser -D -u 1113 test123
RUN mkdir /testing && chown test123 /testing
VOLUME /testing

Now when the container runs, the /testing directory is owned by the test123 user. It’s not quite over, yet, though. This works if we let Docker create a volume automatically for us, or if we create a named volume and mount that; if we try and mount a host directory, though, it falls flat:

$ docker run --rm -it -v "$PWD/testing:/testing" testing ls -al /testing
total 8
drwxr-xr-x    2 1000     1000          4096 Apr  1 19:39 .
drwxr-xr-x    1 root     root          4096 Apr  1 20:44 ..

Docker handles mounting host directories differently to mounting volumes, even though the syntax is basically the same. Host directories are bind mounted directly into the container, so the permissions and ownership are the same as the directory on your host. The only way to fix them are to either change the permissions on the host, or have the container change them at runtime (assuming it has sufficient privileges).

One final wrinkle in all this happens when you use the same volume in multiple containers. Here we have two images built from the Dockerfile above, one with userid 1113 and one with userid 1114:

$ docker volume create testing
testing

$ docker run --rm -it -v testing:/testing testing1113 ls -nal /testing
total 8
drwxr-xr-x    2 1113     0             4096 Apr  1 19:49 .
drwxr-xr-x    1 0        0             4096 Apr  1 20:51 ..

$ docker run --rm -it -v testing:/testing testing1114 ls -nal /testing
total 8
drwxr-xr-x    2 1114     0             4096 Apr  1 20:47 .
drwxr-xr-x    1 0        0             4096 Apr  1 20:52 ..

$ docker run --rm -it -v testing:/testing testing1114 touch /testing/Hello

$ docker run --rm -it -v testing:/testing testing1113 ls -nal /testing
total 8
drwxr-xr-x    2 1114     0             4096 Apr  1 20:52 .
drwxr-xr-x    1 0        0             4096 Apr  1 20:53 ..
-rw-r--r--    1 0        0                0 Apr  1 20:52 Hello

$ docker run --rm -it -v testing:/testing testing1114 ls -nal /testing
total 8
drwxr-xr-x    2 1114     0             4096 Apr  1 20:52 .
drwxr-xr-x    1 0        0             4096 Apr  1 20:52 ..
-rw-r--r--    1 0        0                0 Apr  1 20:52 Hello

Can you see what’s going on? When the volume is empty, the ownership changes based on the mount point in the container. Once it has something in it, the ownership is fixed.

So Docker behaves differently with regard to permissions:

when the folder is mounted from the host vs a volume
when the volume is empty vs having content

Pre-populating mounts with files from the image

One of the more esoteric features of the way Docker handles volume mounts is that in some cases files from the image are copied over into the container. For example:

$ docker volume create testing
testing

$ docker run --rm -it -v testing:/etc testing sleep 1

$ docker run --rm -it -v testing:/tmp testing ls -al /tmp
total 184
drwxr-xr-x   15 root     root          4096 Apr  1 20:58 .
drwxr-xr-x    1 root     root          4096 Apr  1 20:59 ..
-rw-r--r--    1 root     root             4 Jun  7  2018 TZ
-rw-r--r--    1 root     root             6 Dec 20 21:31 alpine-release
...

The first container we run mounts the newly created testing volume at /etc. Docker copies all the existing files and folders into the volume; when we then run the second container with the volume mounted at /tmp, we can see all the files that were in the first container’s /etc.

As with permissions, this behaviour is anything but consistent. Say we switch from a volume to a host directory:

$ mkdir testing
$ docker run --rm -it -v "$PWD/testing:/usr/bin" testing sleep 1
$ ls -al testing
total 8
drwxr-xr-x 2 root  root  4096 Apr  1 22:05 .
drwxr-xr-x 3 chris chris 4096 Apr  1 22:05 ..

Nothing is copied in, and inside the container the folder will be empty. Based on our discoveries with permissions, it’s reasonable to assume the same will happen with a non-empty volume too:

$ docker volume create testing
testing

$ docker run --rm -it -v testing:/testing testing touch /testing/Hello

$ docker run --rm -it -v testing:/usr/bin testing sleep 1

$ docker run --rm -it -v testing:/tmp testing ls -al /tmp
total 8
drwxr-xr-x    2 root     root          4096 Apr  1 21:09 .
drwxr-xr-x    1 root     root          4096 Apr  1 21:09 ..
-rw-r--r--    1 root     root             0 Apr  1 21:08 Hello

So at least that’s consistent. If you’re very observant, though, you might notice I switched from /etc/ to /usr/bin in the examples. That’s because within the container /etc/ has some files bind-mounted into it, such as /etc/resolv.conf, and these do always result in files being created in the mounted volumes or folders:

$ mkdir testing
$ docker run --rm -it -v "$PWD/testing:/etc" testing sleep 1
$ ls -al testing
total 8
drwxr-xr-x 2 chris chris 4096 Apr  1 22:12 .
drwxr-xr-x 3 chris chris 4096 Apr  1 22:12 ..
-rwxr-xr-x 1 root  root     0 Apr  1 22:12 hostname
-rwxr-xr-x 1 root  root     0 Apr  1 22:12 hosts
-rwxr-xr-x 1 root  root     0 Apr  1 22:12 resolv.conf

Summary

Docker treats mounting host folders and mounting volumes differently. Don’t just assume that you can swap one for another and get the exact same behaviour.
Empty volumes will inherit permissions and files from the image they are mounted in; non-empty volumes and host folders will not.
Relying on Docker copying files into volumes is a very bad idea, as if you change those files in a future version of your image they will not be copied unless the volume is deleted and recreated.

I can’t find anywhere that these points are documented properly; if you know of anywhere, please drop me a message!

Why you should be using HTTPS

2016-06-17T00:00:00Z

The EFF’s HTTPS Everywhere logo

One of my favourite hobbyhorses recently has been the use of HTTPS, or lack thereof. HTTPS is the thing that makes the little padlock appear in your browser, and has existed for over 20 years. In the past, that little padlock was the exclusive preserve of banks and other ‘high security’ establishments; over time its use has gradually expanded to most (but not all) websites that handle user information, and the time is now right for it to become ubiquitous.

Why use HTTPS?

There are numerous advantages to using HTTPS, both for the users of a website and for the operator:

Privacy

The most obvious advantage is that HTTPS gives your users additional privacy. An insecure (HTTP) request can potentially be read by anyone on the same network, or the network operators, or anyone who happens to operate a network along the path between the user and the server.

Users on shared WiFi networks (such as those in coffee shops, hotels, or offices) are particularly vulnerable to passive sniffing by anyone else on that network. If the network is open (as is frequently the case) then anyone in radio range can see exactly what the user is up to.

Integrity

HTTPS also helps to maintain the integrity of your site. With a plain HTTP request, there’s nothing to stop anyone in between the server and the user from modifying the content of the request or the response. This is a frequent tactic used by annoying WiFi gateways (such as the ones you’d find in a hotel), dubious ISPs who want to serve you extra adverts, or just plain old nefarious attackers.

If you’re trying to convey some kind of information to users (and if you aren’t, why exactly are you running a website again?) it seems beneficial to both you and them if the information arrives as you intended, rather than in a modified form due to someone or something tampering with it.

Security

If your website has any kind of authentication, or session identifiers, it becomes extremely vulnerable to an attacker monitoring the traffic and stealing the credentials. This was starkly demonstrated in 2010 when Firesheep was released. This tool allowed anyone to quickly and automatically hijack social media accounts of anyone on the same network who was using HTTP to access them.

Even if your login pages are served over HTTPS, if you send a single session ID cookie over HTTP (such as a page you decided wasn’t particularly ‘important’) then an attacker can probably spoof the user’s session and gain full access to their account. Again, in the case of open WiFi networks that could be anyone in radio range.

Search engine rankings

Some search engines use HTTPS as a signal in their ranking algorithms. Google announced in 2004 that it was using the presence of HTTPS as a small positive signal, but that it may strengthen that signal over time as more and more websites switch to using a secure transport. It’s not unthinkable that at some point in the future there will be HTTPS-only search engines.

But… But… But…

There are lots of excuses for not implementing HTTPS. Most of them are either misguided or outdated.

It’s too expensive and/or complicated

In the past, getting HTTPS certificates was a pain. A number of free suppliers have existed for a while but the process for getting their certificates wasn’t particularly straight forward, and many imposed arbitrary restrictions on the certificate parameters. Even once you had the certificate, you had to fiddle about with your HTTP server configuration to make it work, remember to manually get a new certificate when the old one expired, and lots of other annoying busywork.

With the arrival of Let’s Encrypt, all that changed. You can retrieve and deploy a free HTTPS certificate with two or three commands. Renewal can be handled completely automatically with a single command executed by cron.

There’s no point; nothing on my site is sensitive

You might not think your content warrants privacy, but can you speak for everyone who accesses it? Even content that seems mundane to you — such as travel advice, or technical writing — could be used to build up a profile of a user. If an attacker is monitoring traffic in a coffee shop and sees a user looking at travel advice and weather forecasts for a foreign country, he could use that information to plan a burglary knowing that the user will be away. Similarly, some content which is perfectly mundane to you may actually be very sensitive in other countries with repressive governments. HTTPS makes it much harder for these people to snoop on traffic.

From another angle, if you’re offering any kind of information, instructions, or especially file downloads, there’s a severe risk to users if the content is modified on its way to them. An evil sysadmin could rewrite your travel advice to suggest visiting the local drug dealer’s hangout, or replace your download with a malware-infested version.

HTTPS is slower, uses more resources, etc

Back in 1995 this might have been a valid argument. Enabling HTTPS on a modern server will make an almost negligible difference to performance. If you also enable HTTP/2 (which most implementations only support over HTTPS), it’s likely to actually use fewer resources, and result in a faster, smoother experience for your users. HTTP/2 was designed to work with HTTPS, and designed with modern requirements and networking techniques in mind.

CloudFlare have an excellent demonstration of the benefits of HTTP/2, and it can show speed improvements of 2-3x in a typical environment. On top of being faster, HTTP/2 uses fewer connections which results in less resource overhead on both the server and the client.

So what are you waiting for?

If you run a website and aren’t using HTTPS, give it a try.